Chine (Rép. pop) Biens d'équipement
Biens d'équipement

Wire Stripping Machine

Common failures and methods of wire stripping machine.


1. The length of front wire is different.
A. If the clearance is too large for the left transmission line, adjust the left clearance.
B. The straightener is pressed too tightly. Adjust the straightener adjustment knob.
C. The catheter is not aimed at the center of the knife, and it will adjust the catheter to the center of the blade.

2. The length of the back wire is different.
There is too much clearance for the right transmission line. Adjust the right clearance adjustment disc to the right clearance.

3. The total length is inconsistent with the actual setting parameters.
A. It is longer than the set length, which is due to the systematic error in the mechanical transmission, you need to reduce the value of "L" in the mode.
B. It is shorter than the set length. Because the gap and pressure adjustment between the two wheels of the left transmission line is not suitable, and the value of "L" should be increased in the mode.
C. The length is not consistent because of the failure of the straightener to send the line. It is necessary to adjust the pressure of the right transmission line to the suitable clearance, keep the straightener sent smoothly.

4. The front-end incision is inclined.
It is due to the improper positioning of the catheter. Align the tube with the center of the knife edge.

5. The line head is stripped out of normal while the line end is normal. Some of the incisions are inclined, some of the line cores are cut.
Because the position of the tube is too close to the blade. Adjust the position of the tube, so that the distance between the front end of the tube and the blade is greater than the distance from the line tail (A).

6. The front or the back is cut off in the same bundle line.
Because the edge of the blade is too blocked by too much wire skin and clean it with a brush.

7. The insulation skin is overlaid.
Because there is the excessive pressure on the left and right transmission line. Reduce the left and right pressure wheel.

8. Stripping or stripping in the middle, the length L is qualified, but the size of A.B does not meet the requirements of setting.
A. The wire quality is not qualified, the insulation layer is too loose to the core wire, and the qualified conductor can be replaced.
B. The insulation layer is too soft which is pushed to deformation in machining molting process. The prototype cannot be recovered by external. It is the processing method itself that has the inherent defect. Thus reduce the requirements on the accuracy of length.

Localisation : 11th Floor, JingZuan Building, No 875,XIAOLIN ROAD,KUNSHAN CITY, 215316 Jiangsu,
Personne à contacter : Lee Salome, 0086 0512 57169166

Bonne affaire : acheter au vendeur

Consultez notre guide pour effectuer une transaction en toute sécurité ! En aucun cas Algomtl ne peut être tenu responsable des annonces publiées. Seule la responsabilité du vendeur ou de l'acheteur en cas de litige est engagée.
Nous vous invitons à lire nos conditions générales d'utilisations. Vous pouvez aussi vous rendre sur nos FAQ et consulter notre page d'informations sur les risques liés à la contrefaçon.
Cette page concerne les importateurs et exportateurs de
Wire Stripping Machine

Rechercher dans la catégorie : Biens d'équipement
Rechercher dans la catégorie :
stripping, machine, wire
Turquie 42050 Alimentaire
photo non disponible

Jeudi 20 juin 2013

Quantité : 1 - Prix : 10000 USD

Chaudière en acier inoxydable ET EQUIPEMENTS NOS ZONES DE PRODUCTION INDUSTRIE ALIMENTAIRE • bonbons durs et mous LIGNES DE PRODUCTION • CHOCOLAT LIGNES DE PRODUCTION • HALVA, confiture, miel, RAISIN LIGNES DE PRODUCTION la mélasse • TAHINI, graines de sésame USINES...

TURKON EXPORT LTD.

  • 42050 - KONYA
  • +905353265862
France 510510 Pro / B2B
Polyester lanyard

Jeudi 05 mai 2016

Model: SB-067 Name: Polyester lanyard Customize: Width, Logo Material: Polyester(rope), Metal(hook) Size: 2cm*90cm Weight: Hemming process: Sewing Hook type: Lobster hook Color: Printing: Sublimation Product description: http://www.scivas.cn/Lanyard/polyester_lanyard/SB...

Shenzhen Mingjia Smart Card CO., LTD

  • 510510 - Guangzhou
  • 0086 20 85246124
France 510510 Pro / B2B
Polyester lanyard

Mercredi 04 mai 2016

Model: SB-019 Name: Polyester lanyard Customize: Width, Logo Material: Polyester(rope), Metal(hook) Size: 2cm*90cm Weight: Hemming process: Rivet Hook type: Lobster hook Color: Yellow Printing: Screen print Product description: With side release buckle and safety...

Shenzhen Mingjia Smart Card CO., LTD

  • 510510 - Guangzhou
  • 0086 20 85246124