What Is the Root Cause of the Warping Deformation of Foamed Equipt Concrete?
What is the root cause of the warpage of foamed equipt concrete? In the production of foamed concrete equipment, problems of warpage of the equipment sometimes occur. So, why should we start?
1. The warping deformation of equipt concrete depends largely on the difference between the radial and tangential shrinkage of the equipment. This difference may be caused by a different degree of molecular orientation. Since the melt molecules generate molecular chain orientation under the action of external force during filling of the device, the molecular orientation along the flow direction of the melt is greater than the molecular orientation in the vertical flow direction. After the filling is completed, the oriented molecules always try to restore the original coiling state, resulting in a shortened length of the device in this direction. Therefore, the shrinkage in the two mutually perpendicular directions is unbalanced, and warping deformation is inevitably caused.
2. The equipt concrete mold is not properly cooled. If the cooling system design of the mold is not reasonable or the mold temperature is improperly controlled, insufficient cooling will cause the equipment to warp and deform. Especially when the difference in wall thickness of the device is large, the device is particularly prone to warpage due to inconsistent cooling shrinkage of various parts of the device. Therefore, when designing the shape structure of the equipment, the section thickness of each part should be as uniform as possible. In addition, the equipment must maintain sufficient cooling set time within the mold. In addition, when designing the casting system of the mold, the flow characteristics of the melt should be kept as parallel as possible during the filling process. Thus, although the formed devices have different shrinkage in the mutually perpendicular directions, they do not cause a large warp deformation.
3. The mold release and exhaust system design of equipt concrete is unreasonable. If it is subjected to a large unbalanced external force during the demolding process, it will cause a large warp deformation of its body structure. In this regard, in the mold design, the draft angle, the position and number of the ejector pins should be reasonably determined, and the mold strength and positioning accuracy should be improved. For small and medium-sized molds, the anti-warping mold can be designed and fabricated according to the warpage rule, and the cavity is made into a curved surface opposite to the warping direction in advance to offset the orientation deformation. However, this method is difficult to master and requires repeated trials and revisions.
Personne à contacter : Tang Bruce , +18 1 53 79 28 25
Bonne affaire : acheter au vendeur
Nous vous invitons à lire nos conditions générales d'utilisations. Vous pouvez aussi vous rendre sur nos FAQ et consulter notre page d'informations sur les risques liés à la contrefaçon.
Cette page concerne les importateurs et exportateurs de What Is the Root Cause of the Warping Deformation of Foamed Equipt Concrete? Rechercher dans la catégorie : Véhicule Rechercher dans la catégorie : cause, root, equipt, warping, what, foamed, deformation |
Mercredi 14 septembre 2016
Quantité : 5000 - Prix : 100,00 €
Corps Acier A216 WCB & GS-C25 & 1.0619 & GP240GH - Clapet Inox 420 - Siège Inox 420 - Soufflet Inox 321 - Presse étoupe Graphite Tige et volant montants tournants - Chapeau et presse étoupe boulonnés - A brides RF PN16/ PN25/40 - Commande par volant fonte - Peinture...
ETM Armaturen
- 59590 - Henri Durre
- 86 577 67953935
Mercredi 14 septembre 2016
Quantité : 5000 - Prix : 50,00 €
Corps Acier A216 WCB & GS-C25 & 1.0619 & GP240GH - Clapet Inox 420 - Siège Inox 420 - Soufflet Inox 321 - Presse étoupe Graphite Tige et volant montants tournants - Chapeau et presse étoupe boulonnés - A brides RF PN16/ PN25/40 - Commande par volant fonte - Peinture...
ETM Armaturen
- 59590 - Henri Durre
- 86 577 67953935
Dimanche 02 décembre 2012
Quantité : 1 - Prix : 95 000,00 €
Vends camion sonde foreuse Ingersoll Rand T4W année 1978 avec 215 m de tubes en acier 2 marteaux sd6 et sd8 + 3 taillants et tout l'outillage nécessaire. Camion et Sonde/Compresseur entièrement remis à neuf, pompes et circuit hydraulique ainsi que pompe à mousse inclus, Factures...
SIFED Sarl
- 13100 - Bouznika
- 00 212 678052146