Snatch Block
Prix : 0.01-1000
Snatch Block is a lifting tool for transferring over short distances or to double/triple the capacity when used in conjunction with hoist/winches. It is also widely used for recovery where a three-point motion is needed. TITANSUHE snatch block manufacturers snatch blocks are all constructed sturdy and durable with a smooth pulley wheel and wide sheave that can reduce the wear of wire ropes. It's your excellent choice in most rigging and lifting applications.
Maintenance of snatch rigging blocks
The pulley should be checked termly according to the condition of operation and working environment. The period should be one time for every 3months at least. If available, static loading experiment on the basis of 1.6 times of rated capacity is suggested.
When examining and repairing the pulley, the parts should be cleaned with gasoline and coated with lubricant and anti-rusty oil, then re-assembled.
In the handling process, the pulley is not allowed to throw and smash to avoid component deformation.
If you do not use the pulley for a long time, it should be cleaned and then coated with anti-rusty oil, stored in a ventilated, dry place to avoid corrosion.
Regulations of Safe Use the rope sheave block
·
Overload is prohibited, no stands under the lifting objects .
·
Confirming the pulley snatch is intact prior to use, the lubrication of the transmission part is well and idling situation is normal.
·
The hook should be scrapped if one of the following cases appears
·
a) Crack
b) If worn, the actual height of the dangerous section is less than 95% of the basic dimensions
c) Deformation of hook mouth is more than 10% of former size
d) Torsional deformation is more than 10%
e) Dangerous section or hook neck generates plastic deformation
·
The wheels should be scrapped when one of the following cases appears
·
a) crack
b) radial wear of wheel groove reaches 25% of the nominal diameter of the wire rope
c) the wear of the groove reaches 10% of basic dimensions.
d) Unequal wear of the groove reaches 3mm
e) other defects
·
The total load of the pulley should not exceed its rated capacity. When only part of wheels is used for lifting for the multiple sheave blocks, the loading capacity should be lowered and the reduced data is determined by numbers of ratio wheel. The gravity centre of the object should also through the centre line of the pulleys.
·
When the pulley is used under the rated capacity, movement speed of the wire rope shall not exceed 30 m/min. If the impact load is comparatively bigger during the lifting, upper grade pulleys should be adopted, otherwise accident may occur.
·
When use the pulleys lift the high temperature or corrosive medium, if there is thermal radiation or contact with corrosive medium, upper grade pulleys should be adopted
·
If the wear of the middle diameter of the centre shaft reaches 2% of basic dimensions, the pulley should be scrapped.
·
The pulleys should be scrapped when the wear of sliding bearing thickness reaches 20% of basic dimensions defects on the ball bearing.
As one of the most professional lifting equipment manufacturers, we provide snatch block sheave, wire rope snatch block, wire rope sheave block, steel wire rope, wire rope clips, etc. For more information, please feel free to contact us!
Personne à contacter : LIU Ammy, 86 23 67109618
Bonne affaire : acheter au vendeur
Nous vous invitons à lire nos conditions générales d'utilisations. Vous pouvez aussi vous rendre sur nos FAQ et consulter notre page d'informations sur les risques liés à la contrefaçon.
Cette page concerne les importateurs et exportateurs de Snatch Block Rechercher dans la catégorie : Divers Rechercher dans la catégorie : block, snatch |
Vendredi 25 avril 2025
Nos plats, assiettes, coupes sont taillés dans un marbre fossilisé datant de l'ère primaire (450 millions d'années). Nos artisans ont apporté le plus grand soin et leur savoir-faire ancestral lors de son extraction, de sa taille et de son polissage en mettant en valeur les ammonites...
la pierre d'erfoud sarl
- pierrederfoud
- 52200 - erfoud
- +212661997865
Jeudi 24 avril 2025
Quantité : 200000
FRIPE'IN France RENSEIGNEMENTS FRIPE'IN Tous nos Produits sont triés à la main par des employés qualifiés dans nos deux centre de tri basé en Europe et que pour nos clients notre travail prioritaire ce base sur la qualité à la quantité avec de l'original francais et italien, nous...
FRIPE'IN
- fripein123
- 34740 - vendargues
- 06 51 87 22 64
- 651872264
Vendredi 25 avril 2025
Nos produits sont taillés dans un marbre fossilisé datant de l'ère primaire (450 millions d'années). Nos artisans ont apporté le plus grand soin et leur savoir-faire ancestral lors de son extraction, de sa taille et de son polissage en mettant en valeur les ammonites et les orthocères...
la pierre d'erfoud sarl
- pierrederfoud
- 52200 - erfoud
- +212661997865
Paiement sécurisé
