Chine (Rép. pop) Biens d'équipement
Biens d'équipement

Mold Powder Thickness Detection System

Quantité : 1   Prix : 50000usd

Mold Powder Thickness Detection System

Overview:

Mold powder is mainly used in the continuous casting and steelmaking process, evenly sprinkled on the molten steel surface in the mold to lubricate, keep warm, prevent oxidation and absorb non-metallic inclusions. Mold powder is an indispensable auxiliary production material in the production process. In the process of evenly distributing the mold powder to the molten steel surface of the mold, the amount of mold powder should be controlled, and the thickness of the mold powder should be within a certain range. If the coverage thickness of the mold flux is too thin, it will cause no heat preservation, oxidation of molten steel, inclusions, cracks, large drawing resistance, steel leakage, etc. At the same time, the coverage thickness of mold flux should not be too thick, they can't melt in time with too much mold powder, if the molten steel is churning, it is easy to get the mold powder into molten steel at this time, resulting in mold leakage. Therefore, the amount of mold powder must be controlled within a reasonable range. The detection and control of mold flux thickness is very important, especially for the steel plants which are strict with the steelmaking production process.

The detection principle:

The mold flux detection system developed by Wuhan CenterRise M&C Engineering CO., Ltd. uses the laser triangular sensor fixedly installed above the mold to obtain the height h1 by scanning the upper surface layer of mold flux with high-precision laser triangulation. When the laser measuring head is placed each time, the height h0 of the upper nozzle of the mold will be marked, and the system through the PLC system which is connected to the continuous casting machine through the network to introduce the height h2 of the mold liquid level. Through the calculation of three heights, we can get the thickness of mold powder H = 900-h3-(h1-h0) mm (900mm is the depth of mold).

The features:

The system adopts a high-precision laser triangulation distance meter, which can measure the thickness of the mold flux with high speed and high precision, and the accuracy can reach 1mm.

The equipment is easy to install and use. When we are using, the laser rangefinding sensor can be placed directly above the mold without affecting production.

The system can be interlocked with the automatic mold powder feeding system to automatically adjust the amount of mold powder, so as to automatically control the amount of mold powder within a reasonable range and realize intelligent automatic mold powder feeding.

Non-contact measurement, the system only needs ventilation protection, simple and stable to use.

The parameters:

Measurement range:0-50mm

Temperature measurement range: -20℃-700℃

Equipment installation distance:<750mm</p>

System measurement accuracy:1mm

Laser measurement accuracy: 0.1mm

Frequency: 700-2000Hz

Cooling method: air-cooled purging

Installation method: rail sliding installation, can be slid out during maintenance

Storage period: data can be stored for more than 2 years

Communication method: Industrial Ethernet or Profibus-DP

Localisation : Hengxin Industrial Park,Wuhu, Huangpi, Wuhan, Hubei, China, 432200 Wuhan,
Personne à contacter : Floria Liang, 8613995588597

Bonne affaire : acheter au vendeur

Consultez notre guide pour effectuer une transaction en toute sécurité ! En aucun cas Algomtl ne peut être tenu responsable des annonces publiées. Seule la responsabilité du vendeur ou de l'acheteur en cas de litige est engagée.
Nous vous invitons à lire nos conditions générales d'utilisations. Vous pouvez aussi vous rendre sur nos FAQ et consulter notre page d'informations sur les risques liés à la contrefaçon.
Cette page concerne les importateurs et exportateurs de
Mold Powder Thickness Detection System

Rechercher dans la catégorie : Biens d'équipement
Rechercher dans la catégorie :
detection, powder, thickness, mold, system
Cameroun 00237 Pro / B2B
Wenge, bubinga, iroko, padouk, sapelle boards/logs

Samedi 30 juillet 2016

Nous sommes une société d'exportation de bois tropical et équatorial généralisée dans l'exportation d'espèces de feuillus et de résineux de bois d'Afrique occidentale. Nous pouvons fournir les espèces suivantes de bois sous forme de grumes rondes, carrées journaux, bouteilles, bois...

Premium Wood Cam Sarl

  • 00237 - Douala
  • 00237663297934
Suisse Véhicule
Xenon Slim H7 Brenner 6000K Autobrenner 12 V

Mercredi 10 décembre 2014

H7 Xenon Slim Kit BALLAST Brenner 6000K Brenner + Steuergerät Für Vorne 2 Stk. Licht Autobrenner Beschreibung: Diese Glühlampen sind aus hoher Qualität. Die sind mit Xenongas gefüllt. Durch einfache Montage können sie sofort funktionieren. Das Licht ist extra hell und stark, damit...

Euro-Sino

  • - Thun
Bangladesh 6700 Alimentaire
SHRIMP

Lundi 23 novembre 2015

We are one of the A-grade exporter & buying agent of block frozen shrimps/prawns of various grade/count/sizes and processed in all popular forms of the following products from Bangladesh. Our packers processing shrimp under the HACCP (Hazard Analysis and Critical Control Point)...

Northern Vegetable & Meat

  • 6700 - Sirajgong
  • 8801753298167