LSG6K10D Ring Wave Generator
LSG6K10D Ring Wave Generator/Surge Generator
Introduction:
Ring wave generator is completely meet the requirements of IEC61000-4-12, GB/T17626.12 and ANSIC62.41/45.Ring wave generator is used for the simulating electrical network, the power supply of the reactive load the control line switch, as well as sensing the ring wave of the low voltage cables terminal equipment caused by the disconnection of the power circuit, fault and insulation breakdown or lightning stroke. It is widely used in electronic equipment.
Surge generator is designed according to IEC61000-4-5 and GB/T17626.5,and completely meet the requirements of the standards. It is widely used in the fields of industry control equipment, house-holding appliance,medical electronics, communications electronics,components, auto control equipment and etc.
Standard:
IEC61000-4-12 GB/T17626.12、ANSI C62.41/ 45, IEC61000-4-5和GB/T17626.5
Features:
1. 7 inches LCD touch screen, with plentiful functions, easy to operation and update the software.
- User can design the test program, and has 1000 groups memories.
- Monitoring the surge voltage and current waveform by work with an external oscilloscope.
- Built in single phrase 10A (16A) network, makes the equipment smaller and convenient.
- With high-strength plug in the panel, EUT can connect with the equipment convenient and reliable.
- Monitoring the work voltage and current of the EUT. Overvoltage protection and overcurrent protection.
- Intelligent test the surge output, warning at voltage error and no output.
- Intelligent judge the abnormal of high voltage and surge output.
Parameters of Ring Wave Generator:
Voltage Oscillation frequency (open): |
100kHz±10% |
Output voltage(open): |
(250V~4000V)±10% |
Frontier(open circuit voltage,T1,10%~90%): |
0.5μs±30% |
Frontier(short circuit voltage,T2,10%~90%): |
≤0.9μs |
Decay Rate (open circuit voltage) |
40%<<span style="font-family: 宋体">(PK2)/(PK1)<110%</span> |
40%<<span style="font-family: 宋体">(PK3)/(PK2)<80%</span> |
|
40%<<span style="font-family: 宋体">(PK4)/(PK3)<80%</span> |
|
Short circuit current at 3500V(PK1): |
292A±10% @12Ω |
117A±10%@30Ω |
|
Interval: |
1s~99s |
Impulse times: |
1~9999times |
Output mode: |
Positive, negative, positive/negative auto |
Output Impedance: |
12Ω,30Ω |
Phrase: |
asynchronous, synchronous |
Coupling and decoupling network(CDN): |
16A single Phrase or 20A 2phrases/5wires |
Parameters of Surge Generator
Output voltage (open) |
6kV (Max) ±5% |
Front time |
1.2μs ±30% |
Time to half-value |
50μs ±20% |
Output current (short) |
3kA (Max) ±5% |
Time to half-value |
20μs ±20% |
Output polarity |
Positive, negative, positive/negative automatically |
Output impedance |
2Ω±10% |
Synchronization,asynchronization |
Synchronization,asynchronization |
Inject phase |
Freely set at 0-360°,resolution: 1° |
Trigger mode |
Auto or manual, single |
Surge times |
1-9999 times |
Memories |
1000 groups |
Surge interval |
20-9999s |
Accuracy: |
5% |
CDN |
AC:single phrase 300V,10A (16AMax), 50/60Hz |
DC: 300V, 10A (Max) |
|
Working environment |
Temperature: 15°C-35°C humidity: 0%-75% |
EUT power supply |
AC220±10%, 50/60Hz, about 300W |
Dimension |
W470mmxH260mmxD500mm |
Weight |
About 35kg |
Personne à contacter : Peng Penny, 86 (0)795 3560528
Bonne affaire : acheter au vendeur
Nous vous invitons à lire nos conditions générales d'utilisations. Vous pouvez aussi vous rendre sur nos FAQ et consulter notre page d'informations sur les risques liés à la contrefaçon.
Cette page concerne les importateurs et exportateurs de LSG6K10D Ring Wave Generator Rechercher dans la catégorie : Biens d'équipement Rechercher dans la catégorie : generator, lsg6k10d, wave, ring |
Mercredi 14 septembre 2016
Quantité : 5000 - Prix : 50,00 €
Robinet à soupape PN 16/25/40 Acier moulé - Robinet à soupape PN 25‑40 - Construction suivant DIN 3356 - Diamètre : DN15 à DN300 - Chapeau boulonné à arcade - Presse-étoupe boulonné - Tige montante à filetage extérieur - Ecartement suivant EN 558‑1 Série 1 - Raccordement...
ETM Armaturen
- 59590 - Henri Durre
- 86 577 67953935
Mercredi 14 septembre 2016
Quantité : 5000 - Prix : 50,00 €
Gate Valves (F7 Type) DIN Standard F7 Gate valves / (Length acc.to DIN EN 558-1,face to face series 26 ) DIN F7 Gate valve DIN Absperrschieber F7 DIN Válvulas de compuerta F7 DIN F7 šoupátko stavební délka dle DIN EN558-1 serie 26 DIN Standard F7 sluseventil (lengde iht. DIN EN 558-1...)
ETM Armaturen
- 59590 - Henri Durre
- 86 577 67953935
Samedi 21 décembre 2024
Quantité : 100,000 pc
JBI is one of the leading professional screw manufacturers in Taiwan and specialized in manufacturing screws, bolts, nuts, washers, fittings, springs, and other hardware. All our products are produced according to the IFI, DIN, ISO International standard specification. Our fasteners...
Jeng Bright International Corporation
- jbitwco
- 830 - Kaohsiung City
- +88 6 77 02 10 77