IPL+SHR+E-LIGHT Machine
Quantité : 100sets Prix : 4000-7600usd
IPL+SHR+E light treatment is a new method of hair removal, skin whitening and rejuvenation that is virtually painless and free of side effects. The technology used in this SHR+IPL Elight laser machine provides faster, safer and more comfortable treatment than other outdated lasers.
The IPL+SHR+E light machine is available in three modes, IPL, super hair removal E Light, and is a full-featured machine covering hair removal, e light laser skin rejuvenation, pigmentation, redness, and treatment of active acne.Contact Beijing Nubway for more information on intense pulsed light machine .
Specification of IPL+SHR+E-LIGHT Machine
Power |
2000W |
Wavelength |
SR 560-950nm, HR 640-950nm |
Working modes |
IPL, SHR, E-light |
IPL energy |
10-60j/cm2 |
Spot size |
SR: 8*40mm, HR: 15*50mm |
SHR energy |
3-15j/cm2 |
SHR Frequency |
1-10Hz |
SHR Pulse Width |
1-10ms |
RF Power |
160W |
RF energy |
1-50j |
Screen size |
12.1inch |
Voltage |
AC220V±10% 10A 50HZ |
|
110V±10% 10A 60HZ |
Benefits of IPL+SHR+E-LIGHT Machine
Effective
High energy and high density output, the energy can reach the deep hair follicles and be absorbed directly, the energy does not pass through the epidermis and will not damage the surrounding skin.
Comfortable
Sapphire contact cooling with excellent cold conduction reduces the risk of skin burns and increases treatment comfort.
Quickly
Large light spot, 10HZ sliding treatment, more effective, shorten the treatment cycle of the whole course of treatment.
Comprehensive
This IPL treatment machine comprehensively solves skin problems, integrating hair removal, skin rejuvenation, acne removal, and anti-aging.
Safe
Using low-energy high-frequency fast sliding technology, it is really safe.
Multiple modes
Hair Removal, E-light, Ipl three modes can be switched freely to meet the needs of most customers.
Working Principle of IPL+SHR+E-LIGHT Machine
The theoretical basis of IPL SHR E light treatment is based on the principle of selective photothermolysis. When IPL acts on the skin, the skin will produce a large amount of heat by absorbing light, thus promoting the regeneration of collagen and tightening of collagen fibers, as well as promoting blood circulation. It improves the dullness of the face, refines the pores and tightens the skin. The melanin selectively absorbs the laser emitted by IPL, producing an internal blast effect and photothermolysis effect, which destroys melanin cells, thus achieving the effect of hair removal.
Technology of IPL+SHR+E-LIGHT Machine
Using a 1500W high power output power supply, which can ensure fast luminous, energy does not decay
The whole IPL SHR E light machine adopts three 12000 UF high-capacity brand-new capacitors, which are not easy to damage and prolong the service life.
The use of a 9mm diameter xenon lamp can withstand high power, high-frequency use, not easy to fry the lamp, a service life of up to 1 million times.
Water tank using rotomolding process, clean and firm, durable, the use of water quality, rust and other issues will not occur in the process
Double row of large aluminum heat radiators, four high-power DC fans, can ensure that the water temperature is quickly reduced to ensure the use of the machine time
Handle light guide crystal using a quartz crystal, compared to k9 crystal, inverted cooling better, better coefficient of cold and thermal expansion, not easily affected by the temperature resulting in crystal damage
The handle of the refrigeration piece using a 108W high-powered refrigeration piece, can ensure the cooling capacity of the handle, to ensure the comfort of the cooling time.
The whole IPL SHR E light machine adopts double water flow detection, respectively, to detect the situation of the two handles of water, any way water flow problems, there will be a corresponding alarm.
The IPL SHR E light machine also adopts a waterproof structure, the water circuit and the circuit are separated, and all key components are specially waterproofed to avoid the destruction of the main electrical appliances
Handle and the machine connected parts using the rotary knob plugging the way, simple and convenient installation and replacement, the handle comes with an identification chip, after connecting the machine, the system will automatically identify the current handle
The connection between the handle and the machine is equipped with two distance sensors, when the handle is not fully connected to the machine, the machine does not recognize the handle, the pump will not start at this time, the circuit will not work to prevent damage to the machine by misuse.
Applications of IPL+SHR+E-LIGHT Machine
e light facial
Hair removal: permanent removal of unwanted hair from the whole body
Skin rejuvenation: remove pigmentation, remove wrinkles, tighten skin, and whiten skin
Vascular treatment: removal of facial spider moles, acne treatment, facial redness treatment
If you want to know more about e light hair removal reviews, please contact us.
Now the price of shr hair removal device is reasonable, anything you need, please leave us a message.
Nubway company is a professional medical beauty equipment manufacturer integrating R&D, production, sales, training and after-sales service.Our company has a large production workshop of more than 12,000 square meters,Customers' orders can be delivered on time and quality can be also guaranteed
Nubway has more than 350 employees, including more than 40 R&D engineers and more than 20 after-sales engineers.
Personne à contacter : .com NUBWAY, 0086 10 60418533
Bonne affaire : acheter au vendeur
Nous vous invitons à lire nos conditions générales d'utilisations. Vous pouvez aussi vous rendre sur nos FAQ et consulter notre page d'informations sur les risques liés à la contrefaçon.
Cette page concerne les importateurs et exportateurs de IPL+SHR+E-LIGHT Machine Rechercher dans la catégorie : Biens d'équipement Rechercher dans la catégorie : machine, light |
Mercredi 14 septembre 2016
Quantité : 5000 - Prix : 100,00 €
Corps Acier A216 WCB & GS-C25 & 1.0619 & GP240GH - Clapet Inox 420 - Siège Inox 420 - Soufflet Inox 321 - Presse étoupe Graphite Tige et volant montants tournants - Chapeau et presse étoupe boulonnés - A brides RF PN16/ PN25/40 - Commande par volant fonte - Peinture...
ETM Armaturen
- 59590 - Henri Durre
- 86 577 67953935
Mercredi 14 septembre 2016
Quantité : 5000 - Prix : 50,00 €
Robinet à soupape PN 16/25/40 Acier moulé - Robinet à soupape PN 25‑40 - Construction suivant DIN 3356 - Diamètre : DN15 à DN300 - Chapeau boulonné à arcade - Presse-étoupe boulonné - Tige montante à filetage extérieur - Ecartement suivant EN 558‑1 Série 1 - Raccordement...
ETM Armaturen
- 59590 - Henri Durre
- 86 577 67953935
Mardi 17 décembre 2024
Quantité : 80000 Ream - Prix : $0.79/Ream for 8000
CARACTÉRISTIQUES - Dimensions de la feuille: 210mm x 297mm / 297mm x 420mm normes International Paper Taille (ISO) A4 / A3 - Qualité: importé 100% pâte de bois vierge - Blancheur: 102-104%, blanc naturel - Classement: A - Epaisseur: 106cm - Capacité: copie à grande vitesse de 100 ppm...
NATH LAOH LTD
- 50100 - Chiang Mai
- +66 9 95 35 59 56