Vitrine de CHINA-TSCOM T&S COMMUNICATIONS CO., LTD.

Mardi 23 avril 2024

T&S Communication TSQSS-8540G-xxxC is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+SR4 for 40 Gigabit Ethernet Applications. This transceiver is a high-performance module for short-range multi-lane data communication and interconnect applications. It integrates four data...

Mercredi 10 avril 2024

T&S BWDM 3 Ports Device is a kind of FWDM device that can separate C-band and L-band or split C-band into two parts, or split L-band into two parts, which can be used in multi-channel WDM modules Make skip film. Features of Band Separator WDM Device Optical path epoxy free Low...

Mercredi 10 avril 2024

AOC is a cabling technology that accepts the same electrical inputs as a direct attach cable, but uses optical fiber "between the connectors". AOC uses electrical-to-optical conversion on the cable ends to improve speed and distance performance of the cable without sacrificing compatibility...

Mercredi 10 avril 2024

QSFP+ Direct Attach Cables are compliant with the SFF-8436 specifications. SFP+ Direct Attach Cables are compliant with the SFF-8431, SFF-8432 and SFF-8472 specifications. Various choices of wire gauge are available from 30 to 24 AWG with various choices of cable length (up to 7m)...

Mercredi 10 avril 2024

40G QSFP+ AOC T&S Communication TSQS-8540G-xxxC is a four-channel, pluggable, and parallel fiber-optic QSFP+SR4 for 40-gigabit ethernet and it is compliant with the QSFP MSA, 40G Ethernet IEEE 802.3ba 40GBASE-SR4, and InfiniBand SDR/DDR/QDR standards. As a high-performance module...

Mercredi 10 avril 2024

25G SFP28 AOC TS Communication TSSP-8525G-xxxC is a single-Channel, Pluggable, Fiber-Optic SPF28 for 25 Gigabit Ethernet and Infiniband EDR Applications. It is a high-performance module for short-range data communication and interconnect applications that operate at 25.78125 Gbps...

Mercredi 10 avril 2024

SFP+ Direct Attach Cables are compliant with the SFF-8431, SFF-8432 and SFF-8472 specifications. Various choices of wire gauge are available from 30 to 24 AWG with various choices of cable length (up to 7m). Features of 10G Direct Attach Cable Compliant with SFF-8431, 8432 and 8472...

Mercredi 31 janvier 2024

T&S Communication TSPA-85192-xxxC is a Pluggable SFP for 10 Gigabit Ethernet, compliant with the SFF-8431. This transceiver is a high-performance module for short-range data communication and interconnect applications. The length up to 150 m using OM2 MMF or 300 m using OM3 MMF...

Mercredi 31 janvier 2024

QSFP28 100g direct attach cable are compliant with the SFF-8665 specifications. Various choices of wire gauge are available from 30 to 26 AWG with various choices of cable length (up to 5m). Features of 100G QSFP28 Direct Attach Cable Up to 25.78Gbps data rate per channel Up to 5m...

Mercredi 31 janvier 2024

T&S Communication TSQSS-851HG-xxxC is a Four-Channel, Pluggable, Parallel, Fiber-Optic qsfp28 patch cord SR4 for 100G Ethernet applications. This transceiver is a high-performance module for short-range multi-lane data communication and interconnect applications. It integrates...

Mercredi 31 janvier 2024

T&S Communication TSQS-851HG-xxxC is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+SR4 for 100 or 40 Gigabit Ethernet, Infiniband FDR/EDR Applications. This transceiver is a high-performance module for short-range multi-lane data communication and interconnects applications...

Mercredi 31 janvier 2024

T&S is dedicated to provide satisfying products to users in every single project. We create value through professional knowhow, unique production crafts, advance process management, quality control and firm determination. Our commitment on providing products with unbeatable quality...

Mercredi 31 janvier 2024

T&S FWDM Device is a product that can customize the transmission band or the reflection band within the wavelength range of 1260-1680nm; it can achieve transmission or reflection function in the two optical communication windows of 1310 and 1550; it has low insertion loss, polarization...

Samedi 09 décembre 2023

T&S TSPP-31192-LR is a Series single-mode, Pluggable Fiber-Optical SFP for 10G Ethernet, compliant with the IEEE 802.3ae 10GBASE-LR/LW standards. TSPP-31192-LR module is designed for single-mode fiber and operates at a nominal wavelength of 1310nm. The transmitter section uses...

Samedi 09 décembre 2023

ID 0.125/0.126mm, concentricity 1.0um, OD 2.4990mm, this kind of standard optical ferrules with good thermal stability, high precision and reliability, high hardness, high melting point, and long lifetime. SC Singlemode PC(Chamfer) with End Curve Radius Designed on Endface, Length 10...

Samedi 09 décembre 2023

The IP connector together with supported cable is applied to 4G,5G, Base Station remote radios, and fiber to the antenna transmission. Besides of that, T&S IP patch cord series has outstanding water and dustproof characteristic which is applied to rigorous environment like aerospace...

Samedi 09 décembre 2023

The 40G QSFP SR4-400m module is a highly integrated 4x10G transceiver focused on reach, bandwidth, density and cost for high port-count 40G systems, and client-side 40G interfaces. Each lane can operate at 10.3125Gbps up to 300m using OM3 fiber or 400m using OM4 fiber. These modules...

Samedi 09 décembre 2023

The qsfp module is a highly integrated 4x10G transceiver focused on reach, bandwidth, density and cost for high port-count 40G systems, and client-side 40G interfaces. The 40G QSFP+ LR4 Lite transceiver is designed for applications based on the IEEE802.3ba 40GBASE-LR4 standard of up to 2km reach...

Vendredi 14 juillet 2023

Like MTP®/MPO cable, MTP®/MPO Shuffle cable is also used for connecting MTP® modules together as a permanent link, and it also be used with plug-and-play modules or MTP®/MPO connector panels to achieve multi-level connection of the extension of the pre-terminated trunk cable by MTP®/MPO panel...

Vendredi 14 juillet 2023

MTP/MPO cable assembly use MPO or MTP® multi-fiber connectors. MTP®/MPO Fiber Patch Cord greatly saves space and is very convenient to use. Based on single ferrule MT technology, the MPO Fiber Patch Cord assemblies provide up to 72 fiber connections in a single point, reducing the...

Vendredi 14 juillet 2023

T & S MTP® / MPO fiber loop is a device used for parallel connection tests and an aging test of optical communication equipment. Well-designed by engineers at T&S, our MTP®/MPO loopback adapter can transmit the optical network signal from the transmitter to the receiver, thereby...

Vendredi 14 juillet 2023

MPO/MTP® Hydra cable assemblies is deployed inside plug and play cassette modules. It is used for multi-fiber to single-fiber splitting out interconnects. This solution is a 12-colored 0.9mm cable utilizing an MPO/MTP® connector on one end and generic connectors (such as LC, SC, FC, etc...)

Vendredi 14 juillet 2023

MTP/MPO harness cables are a kind of MTP®/MPO fanout harness cable or breakout fiber optic harness assembly with one MTP®/MPO connector on one end and multiple single-fiber connectors (LC, SC, FC, etc.) on the other end, designed for data distribution and routing to patch panels...

Vendredi 14 juillet 2023

T&S grade B patch cord connector is the patch cord with the random mating performance of Grade B as IEC-61753-1 defined, more than 97% of maximum 0.25dB random mated with each other and the average is less than 0.12dB. Simplex, duplex grade patch cable b is well fabricated and...

Vendredi 14 juillet 2023

Fiber Stub is a ceramic (zirconia) capillary assembled with optical fiber. It is the most important component when connecting receptacle Modules such as TOSA and ROSA assemblies. Fiber stubs are fitted into the receptacle modules to achieve a stable connection with the fiber stub...

Mardi 30 mai 2023

Planar Lightwave circuit (PLC) splitter is a sort of optical power management device produced using silica optical waveguide technology and offers a low cost solution for optical signal distribution. It has low insertion loss and polarization dependent loss, miniature size, wide operating...

Mardi 30 mai 2023

With more than 20 years of experience, T&S always provides high-quality fiber optical splitters that meet your needs and promote efficient, cost-effective network expansion. Whichever splitter type you choose, you can trust its ability to function at a high level. We lab test...

Mardi 30 mai 2023

Except traditional connector assembly like LC, SC, MU, FC, ST, E2000, etc., we keep in cooperation with top suppliers for new connector assembly technology enhancement, for example, CS, SN, MDC connector for new applications. Standard Fiber Optic Cable Patch Cord Fiber Patch Cord...

Mardi 30 mai 2023

FBT Coupler is a type of splitter which is based on fused biconical taper technology. The technology is widely accepted and adopted in the PON solution. FBT or fused biconical taper is a traditional technology that two fibers are twisted and fused together under high temperature while...

Mardi 30 mai 2023

At T&S, as one of optical transceiver manufacturers, we supply a wide range of fiber optical transceivers for network, server and storage systems. Optical transceiver we supply are fully compatible with original manufacturer hardware. All products are subject to in-depth qualification...