Vitrine de ANN_ZB Zhongbo Railway Fastening Co., Ltd.

Samedi 22 mars 2014

Production range: rail fishplate or rail joint bar for rails in GB,AREA,BS,UIC,and DIN. Productivity: 1200tons/Month; Size: 1: AREA joint bars,132-136 rail joimt bar and 115-119 joint bar;2: BS standard fishplate is made according to BS47,and it includes BS60R,BS75R,BS75A and BS80A fishplate...

Mardi 18 mars 2014

Key Specifications/Special Features: - We produce and supply rail fishplate (joints bars) for rails in GB, AREA, BS, UIC, and DIN Range - - as below: - - AREA rail joint bars - 132-136RE Joint bars - 115-119 RE Joint bars Our joint bars are made by hot rolling, with middle...

Mardi 18 mars 2014

Key Specifications/Special Features: - SKL TENSION CLAMP - - We produce SKL tension clamps, size from steel bar dia. 12mm to 15mm - Materials specification: DIN 17221, BS970, GB/T 4357, GB/T 4358 - Product properties: Hardness 42-47 HRC. - When spring deflection is 9.1mm...

Mercredi 12 mars 2014

Key Specifications/Special Features: - We produce two type of shoulders for e clips, one is cast in shoulder, which is pressed in concrete sleepers, this type is made by casting from irons; another one is weld on shoulders, we produce by hot forging, this type is used in typical...

Mercredi 12 mars 2014

Key Specifications/Special Features: - Size Dia.20mm - - Size alternative Dia.12mm,14mm, 16mm, Dia.18mm - - Material Refer to DIN 17221, BS970, GB/T 4357, GB/T 4358 - - Mechanical properties Hardness 44-48HRC - - - - Toe load ranges from 1100Kgf to 1400kgf, clip toe -...

Mercredi 12 mars 2014

Key Specifications/Special Features: - We produce and supply track spikes according to AREA, DIN, GOST, GB/TB - - standards, shapes and dimensions as blow: - - We manufacture track spikes according to AREA 14. - - Tensile strength to 55000PSI - - Bend 180 degrees without cracks...

Mercredi 12 mars 2014

Key Specifications/Special Features: - Track bolt according to AREA standard, BS standard, DIN standard and GB standard - AREA OVAL NECK TRACK BOLT - Note: All dimensions given in inches. Tolerances: Length (L) ± 1/8", Neck (O and R1) ± 0.0313", Head (A and H) ± 0.0625", R2 ± 0...