Chine (Rép. pop) Informatique
Informatique

EST-HS2 Manual Durometer Test Stand

Quantité : 1000   Prix : 50~1000 USD

EST-HS2 durometer test stand is a test stand for durometer. The durometer stand is a workbench for loading Shore hardness tester testing. Using a three-point leveling stainless steel work platform, this durometer test stand is more stable and its measurement result is more accurate. The overall structure is reasonable.

Compared with shore hardness gauge, EST-HS2 durometer operating test stand can test various types of shore hardness.

EST-HS2 Manual Durometer Test Stand Features

The durometer test stand can test various types of shore hardness.

Cam-type loading and unloading make the test process more stable.

Operation type: the indenter pressed against the sample

The measuring rod of the durometer stand can be adjusted by lifting.

Workbench adjustment: three-point leveling.

Durometer Operating Stand Specification

Operating Type

Inverter to specimen

Loading Method

Cam loading

Loading Stroke

18 mm

Specimen Thickness

60 mm

Throat Depth

65 mm

Support Table(dia.)

Φ116 mm

Lifting Adjustment

Screw adjustment

Table Adjustment

Three-point leveling

Net Weight

5.6 kg (excluding S weight)

Package Weight

7.6 kg (excluding D weight)

Durometer Operating Test Stand Operation

1. Unpacking

1.1 Take out the durometer test stand from the carton and remove the two packing foam inserts

1.2 Unbundle the webbing strap and remove the foam sheet and foam pad

1.3 Install the handle of durometer stand

2. Weights Selection of Durometer Stand

3. Simple Adjust for Support Table

In most applications, simple adjustments are usually sufficient for the durometer operating stand.

3.1 Release Tighten screw, turn height adjust knob, let durometer stand move down to contact on the support table.

3.2 Adjust 2 Vernier Knobs. Let the face of the support table be fully fitted to the bottom of the durometer operating stand.

4. Install Durometer Operating Test Stand

4.1 Lift Handle to put down durometer stand

4.2 Tighten Durometer Stand through Tighten Knob

5. Fine Adjust for Support Table

When accurate measurements or calibration are performed, fine adjustments to the support table may be required.

5.1 Set the test mode of the durometer test stand to Timing Mode and set its Dwell Time as long as possible, such as 99 s. (Lengthening the time period for reading lock)

5.2 Put standard thickness block between press foot and the support table.

5.3 Lift the handle to make the indenter of the durometer stand press onto the support able through the hole on the block.

5.4 Now the readings are displayed on the durometer test stand. Adjust the Vernier Knobs to make the reading as larger as possible to near 50HS.

Note:

1. If adjustment is not finished in setting time, lift the durometer operating stand then press again for renewing the timing.

2. Because the indenter is often pressed into the table, the reading does not must be "50.0 HS", It is usually less than 50.0 HS. Just adjusting the table to the location of the maximum reading.

3. Too large or too fast adjusting may damage the indenter (especially for type D). So it is better to pre-adjust with the durometer test stand loaded. Or lift up and press down the durometer stand in adjustment.

As a measuring instruments manufacturing company, we have types of force gauge meter for sale, if you have needs, please contact us.

Localisation : 6th Floor 11# building 3th Section of Yangbei Industrial Park Huangtian Hangcheng Bao'an District, Shenzhen, China, 518000 Hangcheng,
Personne à contacter : metry mikro, 0755 29888771

Bonne affaire : acheter au vendeur

Consultez notre guide pour effectuer une transaction en toute sécurité ! En aucun cas Algomtl ne peut être tenu responsable des annonces publiées. Seule la responsabilité du vendeur ou de l'acheteur en cas de litige est engagée.
Nous vous invitons à lire nos conditions générales d'utilisations. Vous pouvez aussi vous rendre sur nos FAQ et consulter notre page d'informations sur les risques liés à la contrefaçon.
Cette page concerne les importateurs et exportateurs de
EST-HS2 Manual Durometer Test Stand

Rechercher dans la catégorie : Informatique
Rechercher dans la catégorie :
manual, durometer, test, stand
Turquie 06370 Alimentaire
Machine de sucre

Dimanche 15 mars 2015

TAYSAN MAKINA CO. Sarl. Est une entreprise qui fait la production des machines types R entièrement automatiques et manuel à fabriquer du sucre en cubes dur en Turquie et aussi des machines à emballage alimentaires divers et sucre en morceaux depuis une expérience de dix ans. Avec...

Taysan Makina Ltd

  • taysanmakina
  • 06370 - Ankara
  • 0090 312 396 01 09
  • 0090 546 610 06 05
Hong Kong 523929 Pro / B2B
Rooman Air Purifier RM-AC-600

Mardi 11 août 2015

Quantité : 500 - Prix : $145~165

- Key Specification - - Color: Various color can be chosed - Input Voltage (V): 120~240V - Rated Power: 50-60HZ - Power (W): 36~55W - Noise Level: 25~55dB - Display Mode:LED - Control Mode:Touch screen - CADR:450m³/H - Purifying Rate:99.7% - Length of Power Cord: 2.2M standard or...

Rooman Electrical Appliances Co., Ltd.

  • Rooman1
  • 523929 - Dongguan
  • +13 6 62 88 32 70
Cameroun 00237 Alimentaire
Boisson d'énergie de Power Horse

Samedi 18 avril 2015

Quantité : 100000 - Prix : 200 per pallet

Boisson d'énergie de Power Horse Avec autant de produits actuels (dont la performance est peu plus qu'une réclamationfondée sur hype) laissant les consommateurs se sentant trahis, c'est le symbole ducheval a représenté puissance et la force du monde au cours des siècles et constitue...

Beverages Supplies Inc

  • 00237 - Limbe
  • +237661757711