Digital Display Pressure Transmitter
NCS Series of Intelligent Transmitters are digital, intelligent, network-based, merged with advanced, reliable and stable sensor technology, to be designed as a new generation of Fieldbus Intelligent Transmitter.
NCS Series of Intelligent Transmitter have been designed with high precision and high reliability, high stability. The pressure, temperature, currents and other physical quantities are displayed on LCD module. Zero drift, range settings and many other functions, are realized by the magnetism bar operation. The interoperability between different systems and equipments are realized by the Equipment Description Document, which is coMpatible to a variety of device management software, and adapting to harsh electromagnetic environment. NCS Series of Intelligent Transmitter have been used in inflammable and explosive places according to Intrinsically Safety Design.
Basic parameters
Measure Object |
Liquid, Gas, Stream |
|
Power |
9~32V DC(FF,PA) 9~32v DC (FF, PA Explosion-Proof Instrument) 11.9~42 V DC (HART) 11.9~30 V DC (Hart Explosion-Proof Instrument) |
|
Output |
Analog: 2 Wire 4~20ma Digital: HART, FF AND PA Signal |
|
Load Resistant |
0~1500ohm (Common) 250~550ohm (With Hart) |
|
Insulation |
Input And Output Insulating Voltage: 500vrms (707vdc) |
|
Display |
Optional 6 Bits Digital Number Or 5 Bits Characters LCD Display |
|
Temperature Scale |
Work Temperature: -40 ~ 85℃ (No Display) -30 ~ 70℃ (Display) -30 ~ 60℃ (Explosion-Proof) Store Temperature: -40 ~ 100℃ (No Display) -40 ~ 85℃ (Display) |
|
Allowed Media Temperature Measured |
-40 ℃~ 110 ℃ (Type Name Include ‘IC‘) -40 ℃~ 149 ℃ (Silicone Oil) -40 ℃~ 204 ℃ (Sylthlem800) -18 ℃~ 204 ℃ (Inert Liquid) -40 ℃~ 104 ℃ (Others) |
|
Humidity Scale |
5%~100%Rh |
|
Start Time |
≤ 5 Seconds |
|
Refresh Time |
0.2 Seconds |
|
Dump Adjusting |
Time Constant 0~15 Seconds |
|
Change Of Cavity |
< 0.16 Cm3 |
|
Static Pressure Limit |
SR |
Range 2: 1000psi (6.89Mpa) |
SD |
Range 3~8: 2000psi (13.8Mpa) |
|
SG |
Range 3~8: 2000psi (13.8Mpa) Range 9: 4500psi (31.0Mpa) Range 0: 7500psi (51.7Mpa) |
|
SA |
Range 4: 58psi (400Kpa) Range 5: 218psi (1500Kpa) Range 6: 435psi (3000Kpa) |
|
SH |
Range 4~7: 4500psi (31.0Mpa) |
|
The Overpressure Limits |
SG |
13.8Mpa (Gauge Pressure) Range 3~8 31.0Mpa (Gauge Pressure) Range 9 51.7Mpa (Gauge Pressure) Range 0 |
SA |
13.8Mpa |
|
Static And Unidirectional Overpressure Ranges |
SR |
3.45 Kpa (Absolute Pressure) ~ 6.89Mpa (Gauge Pressure) |
SD |
3.45 Kpa (Absolute Pressure)~ 13.8Mpa (Gauge Pressure) |
|
SH |
3.45 Kpa (Absolute Pressure)~ 31.2Mpa (Gauge Pressure) |
|
Explosion-Proof Type |
Safety Type, Explosion Proof Type |
|
Electromagnetic Compatibility |
In Line With The GB/t 18268-2010 |
|
Level Of Protection |
IP65/IP67 |
|
Humidity Range |
0%~95%Rh |
Performance Index
Precision |
The Accuracy Is ±0.075% Of The Regulated Range.If The Range Regulated Is Less Than 1/10 Of The Maximum Range, The Accuracy Is ±[0.025 + 0.005 × (Maximum Range/Range Regulated)]% |
|
Temperature Influence |
Every 28℃(50 ° f)Range ≥0.1 Maximum Range: ±[0.019% Maximum Range + 0.125% Maximum Range]Adjustable Range < 0.1 Max Range: ±[0.025% Max Range + 0.125% Adjustable Range] |
|
Stability |
Not Exceeding ±0.1% Of The Maximum Range Within 12 Months |
|
Static Pressure Influence |
SR |
±0.5%/ 6.89Mpa Of The Maximum Range |
SD |
±0.25%/13.8Mpa Of The Maximum Range |
|
SH |
±0.25%/31.0Mpa Of The Maximum Range |
|
Installation Position Influence |
The Maximum Zero Drift Is 0.24Kpa |
|
The Power Influence |
Less Than 0.005%/v Of The Calibration Range |
|
Vibration Influence |
Any Axial 0 ~ 200hz, The Error Is ±0.05%/g Of The Maximum Range |
Electrical Connections |
1/2-14 NPT Internal Thread |
Process Connection |
1/4-18 NPT Internal Thread |
Structural Materials |
Isolation Diaphragm: 316l Stainless Steel, Hasteley C, Monel Or Tantalum Exhaust/Drain Valves: 316 Stainless Steel, Hastelloy C Or Monel Flanges And Transition Joints: 316 Stainless Steel, Hasteley C Or Monel Contact Medium "o" Ring: Nitrile Rubber, Fluorine Rubber Filling Fluid: Silicone Oil Bolts: Galvanized Carbon Steel Electronic Housing: Low Copper Aluminum Alloy Coating: Polyester Epoxy Resin |
Weight (Excluding Options) |
With Display Model:3.6kg Without Display Model:3.3kg |
jiang.yuhang@microcyber.cn +86 18304037682
Personne à contacter : Yvette Jiang, +86 18304037682
Bonne affaire : acheter au vendeur
Nous vous invitons à lire nos conditions générales d'utilisations. Vous pouvez aussi vous rendre sur nos FAQ et consulter notre page d'informations sur les risques liés à la contrefaçon.
Cette page concerne les importateurs et exportateurs de Digital Display Pressure Transmitter Rechercher dans la catégorie : Biens d'équipement Rechercher dans la catégorie : transmitter, display, digital, pressure |
Lundi 07 décembre 2009
Nous recherchons un importateur distributeur exclusif par pays Notre gamme de produits : Bouteilles 1.5l par 6 et bouteilles de 50 ml par 12. TEL : 00 230 433 99 99 Fax : 00 230 433 99 98 Île Maurice Localisation : Sodibo ltd Moka business Centre Montagne Ory Road Bon Air Moka Mauritius...
Sodibo ltd.
- - Moka
- 00 230 433 99 99
- +33 6 27 70 58 57
Vendredi 20 novembre 2015
Our range of Olive oil and olives have several sort of packing! We provide to the markets the best quality products – Greek Extra Virgin olive oil ( BIO organic olive oil and conventional ) Designation of Origin (PDO) and protected geographical indication (PGI) olive oil, and olives...
HCL Suppliers
- 41130 - Udon Thani
- +66 9 95 32 09 64
Jeudi 12 décembre 2024
Quantité : A définir - Prix : A définir
Cofranex International est une société française spécialisée dans la distribution de produits alimentaires et non alimentaires de qualité au meilleur prix. A travers une gamme de plus de 6 000 références en produits secs (épicerie, liquides, D.P.H et non alimentaires), produits frais...
COFRANEX International
- 75008 - Paris
- +33 (0)6 52 47 91 75