CSA Expansive Additive
Quantité : 2000T/Mont
CSA expansive additive description:
The CSA expansive additive is obtained by blending natural anhydrite with clinker powder which consists of calcium sulfoaluminate and CaO. This CSA expansive additive is always mixed with ordinary cement. When mixed in the proper proportion with ordinary cement and hydrated, cement mortar or concrete expands during the early stages of hydration. It is developed to reduce and compensate the hydraulic shrinkage of cement based construction products. Its performance is similar to Denka CSA #20, which is now widely used in the formulation of different mortars in Europe countries.
As a fire brick supplier, we offer two types of these CSA expansive additives, the main specifications are according to JC476-2001
CSA expansive additive technical data:
Parameters |
CSA Expansive additive I |
CSA Expansive additive II |
|
MgO % |
≦ 5.0 |
≦ 5.0 |
|
Water content % |
≦ 3.0 |
≦ 3.0 |
|
Total Alkali % |
|
≦ 0.75 |
≦ 0.75 |
Chloride ion % |
≦ 0.05 |
≦ 0.05 |
|
Specific Surface Area |
≧200m2/kg |
≧200m2/kg |
|
Fineness |
1.18mm residue |
≦ 12 |
≦ 12 |
Setting time |
Initial setting time |
≧ 0: 45 |
≧ 0: 45 |
Final setting time |
≦ 10: 00 |
≦ 10: 00 |
|
Limited Expansive Rate (%) |
7 days in water |
≧0.025 |
≧0.05 |
21 days in air |
≧-0.020 |
≧-0.010 |
|
Compressive strength |
7days |
≧25 |
≧25 |
28days |
≧45 |
≧45 |
|
Bending strength |
7days |
≧4.5 |
≧4.5 |
28days |
≧6.5 |
≧6.5 |
CSA expansive additive performance:
- As making shrinkage compensated concrete, if the ratio of reinforcement is 0.2%-1.0%, the limited expansive rate will be in the range of 0.02-0.04%, and a prestress of 0.2-0.7Mpa exists in the concrete.
- Comparing with the concrete without Expansive Additive, in the condition of defined mixing amount, the free strength of the concrete with Expansive Additive is roughly equal to that of concrete without Expansive Additive. The limited strength is 10~15% higher than free strength.
- The impermeability grade of mortar and concrete can reach over S30. The elastic ratio closes to that of common concrete.
- Anti freezing: D150.
(5) Sulphate resistance of concrete is increased. No pollution to water.
CSA expansive additive application:
- For structural self-waterproofing construction. Effectively preventing cracking or leakage of concrete.
- To extend the space length of post casting zone of cast-in-place overlength structure.
- To control the crack producing result of temperature difference in large sized structural concrete.
- For rigid roofing.
(5) Making non-shrinkage cements.
CSA expansive additive packing:
By 50kgs bags or jumbo bags.
CSA expansive additive Storage:
Store in dry place, guard against damp. Warranty period: 1 year.
For the special cement products, it includes calcium aluminate cements (CA cement)and calcium sulfoaluminate cements (CSA cement/CSA binder). The CSA cement is more and more imported by GRC manufacturers and dry mix mortars manufactures because of its higher performance compare to the Portland cement such as fast setting time, rapid hardening and high strength in 3 days.
Personne à contacter : Zhao Anna, 03155392228
Bonne affaire : acheter au vendeur
Nous vous invitons à lire nos conditions générales d'utilisations. Vous pouvez aussi vous rendre sur nos FAQ et consulter notre page d'informations sur les risques liés à la contrefaçon.
Cette page concerne les importateurs et exportateurs de CSA Expansive Additive Rechercher dans la catégorie : Matières premières Rechercher dans la catégorie : additive, expansive |
Dimanche 24 janvier 2016
Structural Steel Buildings' Advantages: 1. Easy Installation The steel frames are accurately engineered to fit simultaneously, with one end skidding into the other. No exceptional fasteners are required, and fewer employees are required to entire the process. No cutting, retaining...
Hunan ADTO Industrial Group Co., Ltd
- adtosteel
- 413000 - Changsha
- +86 0731 85526339
Jeudi 06 août 2015
Prix : US $ 10,000 - 12,000
Tunnel Kiln Ferrry Pusher with Hydraulic Pressure Hydraulic Ferry Pusher for Brick Making Line Product Features: 1) Hydraulic push 2) Push kiln car 3) Low invest, save labors 4) Stable work 5) Reasonable price Specifications: 1. Auxiliary brick making machine line &...
China Gongyi Yuanhang (Group) Machinery Equipment Co.,Ltd
- 451200 - Gongyi
- +86 371 85669181
- +15 5 03 71 83 90
Jeudi 06 août 2015
Prix : US $ 5,000 - 6,000 /
Energy Saving High-speed Fine Roller Crusher High-speed Fine Roller Crusher for Brick Plant Project Specifications 1.Roller with alloy wear-resistant material , long working life , suitable for breaking shale , coal gangue , industrial tailing and other raw material . 2.Compact structure ...
China Gongyi Yuanhang (Group) Machinery Equipment Co.,Ltd
- 451200 - Gongyi
- +86 371 85669181
- +15 5 03 71 83 90