COLD - 5949 Annonces

Vendredi 05 mars 2021

Forging refers to a process that involves forming a metal using localized compressive forces, and it can be further divided into cold forging, warm forging, or hot forging based on temperature at which it is performed. Compared with cast steel bars, hot forged bars are harder, stronger...

Mercredi 03 mars 2021

Quantité : more than - Prix : 3000-6500 euro per M

Main Feature of Hot Rolled Steel Plate Hot steel coils production is a rolling procedure that relates rolling steel at a high temperature (usually above 1700°F) and over the recrystallization temperature of steel. When the steel heating temperature is higher than the recrystallization...

Mercredi 03 mars 2021

Quantité : more than - Prix : 3000-6500 euro per M

Description of Hot Rolled Steel Coil Hot rolling is a mill process that involves rolling the steel at a high temperature (typically at a temperature over 1700° F), which is above the steel's recrystallization temperature. When steel is above the recrystallization temperature, it can...

Mercredi 03 mars 2021

Quantité : more than - Prix : 3000-6500 euro per M

Description of Galvanized Steel Coils Hot-dip galvanized steel coils are produced by passing the acid-washed and calendered full hard plate through the zinc tank, thereby galvanizing the film on the surface. Galvanized steel coil with good raw materials and 7 times the cold rolling machine...

Mercredi 03 mars 2021

Quantité : more than - Prix : 3000-6500 euro per M

Description of Direct Reduced Iron (DRI Steel) Direct reduced iron (DRI), also called sponge iron, is produced from the direct reduction of iron ore (in the form of lumps, pellets, or fines) to iron by a reducing gas or elemental carbon produced from natural gas or coal. Many ores...

Mercredi 03 mars 2021

Quantité : more than - Prix : 3000-6500 euro per M

Description of Copper Cathode Copper is one of the basic chemical elements. In its nearly pure state, copper is a reddish-orange metal known for its high thermal and electrical conductivity. It is commonly used to produce a wide variety of products, including electrical wire, cooking...

Mercredi 03 mars 2021

Quantité : more than - Prix : 3000-6500 euro per M

Description of Cold Rolled Steel Strip Strip steel has more stringent thickness tolerances than cold-rolled steel. Before rolling, cold rolled steel strip is pickled to remove surface impurities and ensure a clean, even finish. The strip does not shrink or creep at ambient temperature...

Mercredi 03 mars 2021

Quantité : more than - Prix : 3000-6500 euro per M

Description of Cold Rolled Sheet The cold rolled sheet is manufactured from the hot rolled sheet. The hot rolled sheet is cleaned chemically and processed further in cold reduction mills, where the material is cooled (at room temperature) followed by annealing and/or tempers rolling...

Mercredi 03 mars 2021

Quantité : more than - Prix : 3000-6500 euro per M

Description of Cold Rolled Coil Cold rolled coil, as known as CRS or CRC. Cold rolled steel coils are a farther product that uses hot rolled steel coils to do further processing. The further processed steel coil put in a cold rolling mill where the material is cooled (at room temperature)...

Mercredi 03 mars 2021

Packaging & Bag *Material: clear PVC 0.15mm (PVC cold crack resistant minus 15 degree).Packaging & Bag *Material: clear PVC 0.15mm (PVC cold crack resistant minus 15 degree). Packaging & Bag *Material: clear PVC 0.15mm (PVC cold crack resistant minus 15 degree). *Structure...

Mercredi 03 mars 2021

Understanding that your health and security are the top priorities when it comes to purchasing our products, to offer high-quality products, we have earned the certifications from the third-party detection institution such as ISO9001 Certificate of Quality System, SGS Certificate...

Mardi 02 mars 2021

Quantité : 10,000 - Prix : 0-50,000

EM-5Hg Stack Mercury Continuous Monitoring System Overview Of EM-5Hg Stack Mercury Continuous Monitoring System Based on cold vapor atomic fluorescence spectrophotometer technology, we have developed EM-5Hg stack mercury continuously monitoring system to detect the real time concentration...

Mardi 02 mars 2021

Quantité : 10,000 - Prix : 0-50,000

Among all the online continuous emission monitoring system suppliers in China, ZETIAN is the only high and new technology company that has a full set of intellectual property rights of flue gas monitoring. Its independent research and development products include ultraviolet glue gas analyzer...

Samedi 27 février 2021

Cold pressing is to press the oil directly in the oil press without heating after the oil is screened and cleaned. It is difficult to press the oil thoroughly in such a way at one time. The oil cake still contains oil. Sometimes they are needed because they contain less oil but are...

Samedi 27 février 2021

YZYX120ZHWK combined oil press with centrifugal combines with the centrifugal oil filter above the basic function of auto-heating the press cage by replacing the traditional manual wearing in way. The crude oil from the press cage will directly flow into the hydration cylinder of...

Samedi 27 février 2021

Quantité : 3000000PCS - Prix : USD0.015-USD0.50

In our lives, the safety of medicines has attracted much attention. If the container is not safe, it will affect the filled medicine. Pharmaceutical glass bottles are mainly used for packaging injections and other products. Its chemical stability directly affects the quality of medicines...

Vendredi 26 février 2021

thermal shock chamber china perform tailored environmental stress screening of component and board electronic assemblies. Thermal shock test chambers is used to detect the chemical changes or physical damage caused by thermal expansion and contraction of the sample in the shortest time...

Vendredi 26 février 2021

Temperature and humidity test chambers(also called climatic test chambers or humidity and temperature controlled test chamber) simulate and provide different natural environments like high temperature, low temperature, moisture, cold, hot for steady-state stability testing, basic...

Vendredi 26 février 2021

Model: YICT-225 YICT-306 YICT-408 YICT-800 YICT-1000 temperature cycling test chamber Performance Temperature range: -20℃/-40℃/-70℃～+150℃ Rapid-rate temperature range: -40℃～+85℃ Ramp rate: 3℃/5℃/8℃/10℃/15℃ per min(linear type or non-linear type) Description of Rapid Rate temperature...

Jeudi 25 février 2021

USB Rechargeable Automatic Rotating Hair Curling Iron PTC Ceramic Hair Curler Hot Tools Curling Iron for hair salon, small and convenient, easy to carry. One-button automatic curling, zero basic operation. As one of the most professional hair curler suppliers, our smart-LCD temperature...

Mardi 23 février 2021

Connue par sa rareté, l'huile de pépins de figue de barbarie représente l'une des huiles les plus chères du monde. Sa production exige un travail intensif et un long processus géré manuellement par les travaillant pour la coopérative . Les figues de barbaries peuvent être séparées...

Mardi 09 février 2021

Nous vous proposons l'huile de baobab extraite par pression à froid 100% essentiel pour l'hygiène de votre peau. Excellente pour tous les types de peau. Localisation : 08 BP 1740 ABJ 08, 225 Abidjan, Personne à contacter : Yascine Salami, +22 5 79 23 61 69

Samedi 06 février 2021

Backup facilities // Stamping foil For marking products in the leather and shoe industry, many companies use various types of foil, which are divided depending on the method of applying it to the product: foil for hot stamping, foil for cold stamping. A foil for hot stamping is applied...

Vendredi 05 février 2021

Stretch forming is a technology to improve the structure of the unloading part of the forming mold, which can automatically unload the parts under the action of the spring. As a professional stretch forming companies, we provide our client with the most qualified sheet metal stretch...

Vendredi 05 février 2021

Sheet metal is a comprehensive cold working process for metal sheets (usually below 6mm), including shearing, punching/cutting/compounding, folding, riveting, splicing, forming, etc. Its notable feature is the uniform thickness of the same part. The basic equipment of sheet metal...

Vendredi 05 février 2021

As a professional progressive die manufacturer, ETCN provides progressive die tooling, petroleum equipment accessories, processes include stamping, CNC turning, thread processing, laser welding, laser marking, etc. Progressive Die Stamping Capabilities Stamping processing is the production...

Vendredi 05 février 2021

As a professional precision metal stamping manufacturers, ETC has several 15 to 315 tons of stamping and drawing equipment, a complete set of equipment for the production and processing of metal products, and mature processing technology. It established a professional mold processing...

Mercredi 03 février 2021

Zhiben eco-friendly food plate adopts advanced production technology and mold design. Under strict quality inspection, it presents a portable disposable environmentally friendly dinner plate, beautiful and light. Our environmentally friendly disposable plates and cutlery uses natural...

Mercredi 03 février 2021

Zhiben hotel plate adopts advanced production technology and mold design. Under strict quality inspection, it presents a portable disposable environmentally friendly dinner plate, beautiful and light. Our hotel plate uses natural plant fibers as raw materials, such as bamboo, reeds...

Mercredi 03 février 2021

Zhinben Technology, as one of the environmental cup lid manufacturer, makes eco-friendly cup lid as the replacement for the plastic item to reduce the while pollution. Our cup lid uses plant fibers as raw materials and boasts of the quality of beautiful appearance, strong tenacity...