250 MANUAL HAND CABLE CUTTER - 27613 Annonces

Mercredi 22 avril 2015

Product Information Vacuum Pump Systems Oil Diffusion Pump Systems Complete, ready to pumping systems with a pillar design, for the production of high vacuum using oil diffusion principles. All systems comprise oil diffusion pump, rotary vane backing pump, backing pressure gauge PIA 1...

Mercredi 22 avril 2015

Quantité : 1 - Prix : $5

M1602A and M1976A Philips 10 lead wires, connect with M1949A ECG trunk cable M1602A (5 Leads Snap Chest V2 - V6) M1976A (5 Leads Clip Chest V2 - V6) Localisation : 5th floor,6th building,rongtaijia industrial,lisonglang village,guangming new district,shenzhen,China, 518106 shenzhen...

Mercredi 22 avril 2015

Quantité : 1 - Prix : 6$

1.Nellcor Oximax DS-100 Finger Clip Spo2 Sensor, L=1m or 3m 2.Connector Guide: 9 pins,with oximax 3.Compatibility: Original Nellcor Part Number: DS100A (Adult), OXI-P/I (Pediatric), OXI-A/N (Adult), D-YS (Multi-site). This short-cable sensor is for use with an extension cable,...

Mercredi 22 avril 2015

Product description: The equipment is widely used in aerospace, aviation, electronics and other industries components dealing. Using double water-cooled, electric lift, bell vertical stainless steel structure,three heating districts adopt Y -connection,type Y connection of three heating...

Mercredi 22 avril 2015

Main technical data of Induction vacuum hot-pressing furnace Model Effective Working dimension (mm) Max temperature (℃) Ultimate pressure (Pa) Pressure rising rate (Pa/h) IF power (KW0 IF frequency (HZ) Working Pressure (T) Dimension (m) RVIY-60 200×250 ...)

Mercredi 22 avril 2015

Main technical data of Vacuum vapor deposition furnace Model Effective working dimension mm(Φ×H) Max temperature ( ℃) Ultimate pressure (Pa) Pressure rising rate (Pa/h) IF power (KW) IF frequency (HZ) Temperature Uniformity (℃) RVIC-100 350×700 1800 7×10-1 0...

Mercredi 22 avril 2015

Main technical data of Vacuum induction high-temperature graphite furnace Model Effective working dimension mm(Φ×H) Max temperature(℃) Ultimate pressure (Pa) Pressure rising rate (Pa/h) IF power (KW) IF frequency (HZ) Temperature Uniformity (℃) RVIG-100 200×300...

Mercredi 22 avril 2015

Main technical data of Vacuum bottom loading induction furnace Model Effective working Dimension mm(Φ×H) Max temperature (℃) Ultimate pressure (pa) Pressure rising rate(pa/h) IF power (KW) IF frequency (HZ) Temperature Uniformity(℃) RVIS-160B 500×800 2550 7×10-2 0.67 160...

Mercredi 22 avril 2015

Main technical data of Vacuum pyrolysis furnace Model Effective working dimension mm(Φ×H) Max temperature (℃) Ultimate pressure (Pa) Pressure rising rate (Pa/h) IF power (KW) IF frequency (HZ) Temperature Uniformity (℃) RVIP-80 600×800 1000 5 1.5 160...

Mercredi 22 avril 2015

Quantité : 10PCS - Prix : USD3250

Puissance: 150W Commande de puissance de protection parle bien GHN série + original del brigelux 45 mm de cinq ans On peut également fournir 150W 200w 60W 80W 30w D'éclairage: un angle de 90 degrés La tension d'entrée: AC100 - 277v La luminosité de la del d'atténuation: ...

Mercredi 22 avril 2015

Vacuum degassing (VD) leads to high quality steel. The steel companies are adopting to Vacuum Degassing to improve the quality of steel required by customers for automotive, forging, rail industries etc. The VD process lasts approx. 20 Minutes and and is done at pressure of 0.5 torr ...

Mercredi 22 avril 2015

Product description: It is mainly used in the melting, rapid quenching or thrown belting process of Rare earth permanent magnetsNdFeB , hydrogen storage alloy, nickel base material, high temperature alloy etc.materials under the condition of vacuum or inert gas filling. Main configuration...

Mercredi 22 avril 2015

Product description: It is mainly used in the melting, rapid quenching or thrown belting process of Rare earth permanent magnets NdFeB , hydrogen storage alloy, nickel base material, high temperature alloy etc.materials under the condition of vacuum or inert gas filling. Main configuration...

Mercredi 22 avril 2015

Main technical data of Vacuum carburizing furnace Model Effective working dimension (mm) Loading capacity (Kg) Max temperature (℃) Ultimate pressure (Pa0 Pressure rising rate (Pa/h0 Heating Power (Kw) Temperature uniformity (℃) Gas Cooling pressure (bar) WZST-223...))

Mercredi 22 avril 2015

Product Description Use: It is used for vacuum casting of titanium and its alloys . Main technical data: Model Capacity (Kg) Working voltage (V) Maximum current (A) Ultimate vacuum (Pa) Pressure rising rate (Pa/h) Electrode Diameter (mm) Centrifugal plate diameter...

Mercredi 22 avril 2015

Main technical data of of Cycle vacuum induction melting furnace Model Capacity (Kg) Max temperature (℃) Ultimate pressure (Pa) Pressure rising rate (Pa/h) IF power (KW) IF voltage (V) IF frequency (HZ) Dimensions m( L×W×H) RVI-10 10 1850 6×10-3 0.67...

Mercredi 22 avril 2015

Application The stranded aluminum clad steel wires are suitable for the aerial transmission line as overhead ground wire of carrier. They are with low resistance and high strength. Property This kind of products also have four major advantages of excellent corrosion resistance...

Mercredi 22 avril 2015

Application The ACSR/AW conductors are also suitable for use in all practical transmission towers, and other structures. Application ranges from extra high voltage (EHV) transmission lines to sub-service spans at distribution or utilization voltages on private premises as like as ACSR...

Mercredi 22 avril 2015

Main technical data of Hydrogen vacuum sintering furnace Model Effective working Dimension (mm) Max temperature (℃) Ultimate pressure (pa) Pressure rising rate(pa/h) IF power (KW) IF voltage (V) IF Frequency (HZ) Temperature Uniformity(℃) RHIS-160 350×500 2400 10-1 0.67...

Mercredi 22 avril 2015

Main technical data of Ultra high temperature vacuum induction furnace Model Effective working dimension mm(Φ×H) Max temperature(℃) Ultimate pressure (Pa) Pressure rising rate (Pa/h) IF power (KW) IF frequency (HZ) Temperature Uniformity (℃) RVIS-160 500×800...

Mercredi 22 avril 2015

Application The AACSR conductors are also suitable for use in all practical transmission towers, and other structures. Application ranges from extra high voltage (EHV) transmission lines to sub-service spans at distribution or utilization voltages on private premises as like as ACSR...

Mercredi 22 avril 2015

Main technical data of Horizontal vacuum induction furnace Model Effective working dimension mm(H×W×L) Max temperature (℃) Ultimate pressure (Pa) Pressure rising rate (Pa/h) IF power (KW) IF frequency (HZ) Temperature Uniformity (℃) RVIS-160W 400×400×800 2550...

Mercredi 22 avril 2015

Main technical data of Vacuum silicon carbide sintering furnace Model Effective working dimension mm(Φ×H) Max temperature (℃) Ultimate pressure (Pa) Pressure rising rate (Pa/h) IF power (KW) IF frequency (HZ) Temperature Uniformity (℃) RHIS-160 500×800 2400 7×10-1 1...

Mercredi 22 avril 2015

Application The aluminum conductor alloy reinforced (ACAR) is an excellent conductor choice where current carrying capacity, higher strength and a lower conductor weight are critical to the line design. Property - improved strength to weight ratio - better mechanical properties...

Mercredi 22 avril 2015

Main technical data of 1600C degree vacuum sintering furnace Model Effective working Dimension (mm) Max temperature (℃) Ultimate pressure (pa) Pressure rising rate(pa/h) Temperature Uniformity(℃) RVSG-75G 300×250×500 1600 2×10-3 0.5 ±5 RVSG-100G 400×350×800 1600 2×10-3 0...

Mercredi 22 avril 2015

Application AAAC is used as overhead conductor for primary and secondary distribution. It is designed utilizing a high-strength aluminum alloy to achieve a high strength-to-weight ratio; affords better sag characteristics. Aluminum alloy gives AAAC higher resistance to corrosion than ACSR...

Mercredi 22 avril 2015

Application ACSR is a specific type of high-capacity, high-strength stranded conductor typically used in overhead power lines and as primary and secondary distribution conductor and messenger support. ACSR offers optimal strength for line design. Variable steel core stranding enables...

Mercredi 22 avril 2015

Application The conductors are suitable for use in low, medium and high voltage overhead lines. AAC has seen extensive use in urban areas where spans are usually short but high conductivity is required. The excellent corrosion resistance of aluminium has made AAC a conductor of...

Mercredi 22 avril 2015

Main technical data of 1300 degree vacuum sintering furnace Model Effective working Dimension (mm) Max temperature (℃) Ultimate pressure (pa) Pressure rising rate(pa/h) Cooling rate 1100℃-150℃ (min) Temperature Uniformity(℃) RVS-75G 300×250×500 1300 2×10-3 0.5 ≦20 ±3 RVS-100G...

Mercredi 22 avril 2015

Application The triplex cables are suitable for use as drop cable from a pole-mounted transformer, to the service entrance of a structure, or as secondary distribution between poles. Property The cables should be limited to the voltage of 600 volts phase-to-phase or less and at...