PERFORMANCES - 17891 Annonces

Jeudi 10 mars 2016

Before The Curing Appearance White Paste Tack Free Time ≤10 (min) Extrudability 5~11 (g/s，25℃) Cure Time 3～7(d) After the curing Relative Density 1.40～1.45 (g/cm3) Tensile Strength ≥2.5 (MPa) Break Elongation ≥500 (%) Shear Strength ≥2.0 (MPa) Hardness 45～55 (Shore...)

Jeudi 10 mars 2016

Features of Cone Fenders Cone rubber fender is the 3rd generation of cell rubber fender, the structure more reasonable, deflection can reach 70%,the equal specification fender energy absorb raise one more times, long life using. It can reduce the cost of the dock project. While...

Jeudi 10 mars 2016

TLT-AA Super Cell Fender Super Cell fenders are fitted with fender panels to obtain a wide contact area on contact with the vessel, thus reducing pressure against the vessel hull as much as required. Features of Super cell fenders: High energy absorption with relatively low reaction force...

Jeudi 10 mars 2016

Quantité : 1 - Prix : 3 600,00 €

As the professional perfect binding machine manufacture, Qingdao Knady (Binding) Industry Co., Ltd have more than 20years experience, our mother company are in Korea, we are branch factory in China, and all our technology are from Korea, and the key accessories are made in Korea too...

Mercredi 09 mars 2016

4 inch printing width 150mm/s barcode labeling RP400 thermal transfer printer thermal transfer printer Exquisite appearance High speed, good stability, durable performance Transmission-typed paper detection with excellent accuracy and high speed. Multi-functional interfaces with parallel...

Mercredi 09 mars 2016

OBTH800 Book Sewing & Folding Machine Features: 1. Binding notebooks, exercise books, student writing book, account book, pass port, manual, hard cover book, sewing book etc by threading. 2. Ideal choice for mess production, better than saddle stitching machine.. 3. Can thread...

Mardi 08 mars 2016

ZLYJ series gearbox is a high accuracy and hardened tooth surface transmission device, which is designed for single screw extruder with thrust block. The design of gearbox adopt JB/T9050.1-1999. Main features: 1.The material of gear is high strength alloy steel through gear grinding...

Mardi 08 mars 2016

Planetary screw barrel/ Planetary screw and barrel for plastic extrusion Specification: Diameter: Ø15-Ø500 L/D ratio: 5: 1 We can manufacture all types of screws and barrels according to clients' requirement. Base Materials: 1)38CrMoAlA(JIS SACM 645) 2)42CrMo(AISI 4140) ...

Mardi 08 mars 2016

* Introduction for vortex flowmeter No moving parts, long term stability, simple structure and convenient installation and ma intenance.The anti disturbance circuit and anti vibration sensing head, has a certain anti vibratio n performance. Using ultra low power single chip microcomputer...

Mardi 08 mars 2016

* Introduction for vortex flowmeter No moving parts, long term stability, simple structure and convenient installation and ma intenance.The anti disturbance circuit and anti vibration sensing head, has a certain anti vibratio n performance. Using ultra low power single chip microcomputer...

Mardi 08 mars 2016

* Introduction for vortex flowmeter No moving parts, long term stability, simple structure and convenient installation and ma intenance.The anti disturbance circuit and anti vibration sensing head, has a certain anti vibratio n performance. Using ultra low power single chip microcomputer...

Lundi 07 mars 2016

Quantité : 60T/MONTH - Prix : 8.2 USD/KG FOB HUANG

1.description Platinum Cure Molding Silicone is a two parts kinds liquid silicone, which can cured on room temperature. which mainly used for mold making of concrete, stone , jewelry casting,, tire molding ,rapid protyping , vacuum foaming, any condensation silicone can used for...

Dimanche 06 mars 2016

Specifications: 1,Automatic making bag,weighting,filling ,sealing,counting and batching number 2,Model number: JD-Y30 3,Warranty: 2years Company Profile: Guangzhou Jiade Packaging Equipment Co.,Ltd is a manuaturer which was loaded in Guangzhou,China.We b elieve: "Honesty is...

Samedi 05 mars 2016

Quantité : MOQ 1000 M - Prix : 0.1-3USD

Features and Benefits: 1.Light weight,durable,resistance to acid and alkali,aging resistant,corrosion resistant. 2.High tensile strength and bending properties,which make it go through narrow easily. 3.Perfect temperature adaptability,the product will not soften in hot weather...

Samedi 05 mars 2016

Quantité : MOQ 1000 M - Prix : 0.1-3USD

Duct rodder are composed of fiber glass rod which is extruded by fiber glass and high strength resin at high temperature. This type of rod has high tensile strength and flexibility. It was covered by a high density polyethylene engineering plastic as its protect layer,which make...

Samedi 05 mars 2016

Quantité : MOQ 1000 M - Prix : 0.1-3 usd

Duct rodder are composed of fiber glass rod which is extruded by fiber glass and high strength resin at high temperature. This type of rod has high tensile strength and flexibility. It was covered by a high density polyethylene engineering plastic as its protect layer,which make...

Samedi 05 mars 2016

Quantité : MOQ 1000 m - Prix : 0.1-3USD

Duct rodder are composed of fiber glass rod which is extruded by fiber glass and high strength resin at high temperature. This type of rod has high tensile strength and flexibility. It was covered by a high density polyethylene engineering plastic as its protect layer,which make...

Samedi 05 mars 2016

Quantité : MOQ 1000 m - Prix : 0.1-3USD

Features and Benefits: 1.Light weight,durable,resistance to acid and alkali,aging resistant,corrosion resistant. 2.High tensile strength and bending properties,which make it go through narrow easily. 3.Perfect temperature adaptability,the product will not soften in hot weather...

Samedi 05 mars 2016

Quantité : MOQ 1000 M - Prix : 0.1-3USD

Features and Benefits: 1.Light weight,durable,resistance to acid and alkali,aging resistant,corrosion resistant. 2.High tensile strength and bending properties,which make it go through narrow easily. 3.Perfect temperature adaptability,the product will not soften in hot weather...

Samedi 05 mars 2016

Quantité : MOQ 1000 M - Prix : 0.1-3USD

Duct rodder are composed of fiber glass rod which is extruded by fiber glass and high strength resin at high temperature. This type of rod has high tensile strength and flexibility. It was covered by a high density polyethylene engineering plastic as its protect layer,which make...

Samedi 05 mars 2016

Quantité : MOQ 1000 m - Prix : 0.1-3USD

Duct rodder are composed of fiber glass rod which is extruded by fiber glass and high strength resin at high temperature. This type of rod has high tensile strength and flexibility. It was covered by a high density polyethylene engineering plastic as its protect layer,which make...

Samedi 05 mars 2016

Quantité : MOQ 1000 m - Prix : 0.1-3USD

Duct rodder are composed of fiber glass rod which is extruded by fiber glass and high strength resin at high temperature. This type of rod has high tensile strength and flexibility. It was covered by a high density polyethylene engineering plastic as its protect layer,which make...

Samedi 05 mars 2016

Quantité : MOQ 1000 M - Prix : 0.1-3USD

Duct rodder are composed of fiber glass rod which is extruded by fiber glass and high strength resin at high temperature. This type of rod has high tensile strength and flexibility. It was covered by a high density polyethylene engineering plastic as its protect layer,which make...

Samedi 05 mars 2016

Quantité : MOQ 1000 m - Prix : 0.1-3USD

Features and Benefits: 1.Light weight,durable,resistance to acid and alkali,aging resistant,corrosion resistant. 2.High tensile strength and bending properties,which make it go through narrow easily. 3.Perfect temperature adaptability,the product will not soften in hot weather...

Samedi 05 mars 2016

Quantité : MOQ 1000 m - Prix : 0.1-3USD

Duct rodder are composed of fiber glass rod which is extruded by fiber glass and high strength resin at high temperature. This type of rod has high tensile strength and flexibility. It was covered by a high density polyethylene engineering plastic as its protect layer,which make...

Samedi 05 mars 2016

Quantité : MOQ 1000 m - Prix : 0.1-3USD

Features and Benefits: 1.Light weight,durable,resistance to acid and alkali,aging resistant,corrosion resistant. 2.High tensile strength and bending properties,which make it go through narrow easily. 3.Perfect temperature adaptability,the product will not soften in hot weather...

Samedi 05 mars 2016

Quantité : MOQ 1000 M - Prix : 0.1-3 usd

Duct rodder are composed of fiber glass rod which is extruded by fiber glass and high strength resin at high temperature. This type of rod has high tensile strength and flexibility. It was covered by a high density polyethylene engineering plastic as its protect layer,which make...

Samedi 05 mars 2016

Quantité : MOQ 1000 M - Prix : 0.1-3 usd

Duct rodder are composed of fiber glass rod which is extruded by fiber glass and high strength resin at high temperature. This type of rod has high tensile strength and flexibility. It was covered by a high density polyethylene engineering plastic as its protect layer,which make...

Samedi 05 mars 2016

Quantité : MOQ 1000 M - Prix : 0.1-3 usd

Features and Benefits: 1.Light weight,durable,resistance to acid and alkali,aging resistant,corrosion resistant. 2.High tensile strength and bending properties,which make it go through narrow easily. 3.Perfect temperature adaptability,the product will not soften in hot weather...

Samedi 05 mars 2016

Quantité : MOQ 1000 M - Prix : 0.1-3 usd

Duct rodder are composed of fiber glass rod which is extruded by fiber glass and high strength resin at high temperature. This type of rod has high tensile strength and flexibility. It was covered by a high density polyethylene engineering plastic as its protect layer,which make...