25MM - 1712 Annonces

Samedi 22 novembre 2014

Quantité : 500

Frequency: 1575 MHz Dimension: 25x 25mm (or 12x 12, 15x15 and 18x 18mm) VSWR: less than 1.5 Gain: more than 28dBi Impedance: 50ohm Connector: I-PEX, HRS, MURATA, SMA, MCX or customize Cable length can be customized Localisation : No.76, BaoTong South Road, XiKeng Industrial Zone...

Mardi 18 novembre 2014

This company produces the lining material is called “mixed sand” for short. This product is the main refractories of the medium frequency induction furnace used by the small steel enterprises. Its effect is in leading position. Physical and chemical indexes Ingredients SiO2 ...

Mardi 18 novembre 2014

Quantité : 1000

Frequency: 2400 to 2500 MHz VSWR: less than 1.5 Impedance: 50 ohm Gain: 10dBi Dimensions: 140x 120x 25mm Connector: SMA or customized Cable: RG58 White or others Localisation : No.76, BaoTong South Road, XiKeng Industrial Zone, 518115 HengGang, Personne à contacter : Carol Hu...

Dimanche 16 novembre 2014

Quantité : 500

Frequency: 2400 to 2483 MHz Bandwidth:83MHz Gain: 14dBi Half-power beam width: H: 30 degree, V: 30 degree VSWR: equal or less than 2.0 Input impedance; 50 ohm Plarization: Vertical Maximum input power: 50W Lightning protection: DC ground Input connector type: SMA Male or...

Samedi 08 novembre 2014

Henso Wound Plaster Brand Henso Origin Zhejiang, China Material PE, Non-woven, Cotton cloth Color Skin Size: 72x19mm, 72x18mm, 72x25mm, Dia 22mm, 25mm Package Individual wrapped and color box Application Wound Care Certificates CE, ISO 13485, FDA ...

Jeudi 23 octobre 2014

Quantité : 40mic*48mm - Prix : 0.230USD per roll

Description customized bopp printed tape is based on BOPP film with water based acrylic as adhesive, low cost and wide use. It festures high tensile strength, strong viscosity, packaging the goods firmly and not easy to break. Perfomance parameter The related parameter of customized...

Mercredi 22 octobre 2014

C50 steel is high-quality carbon structural steel under the standard EN 10083-2. 1. EN10083-2 C50 steel characteristics: C50 is high strength medium carbon steel and it's cold deformation plasticity is low. Welding performance and hardenability is poor for C50 steel. But its no...

Mercredi 22 octobre 2014

C40 steel is a kind of high-quality carbon structural steel under the standard EN 10083-2. Henan bebon international is C40 steel supplier, we stock all kinds of sizes C40 steel in our warehouse. 1. EN 10083-2 C40 steel equivalent materials: DIN C40, BS 080M40, EN8, GOST 40, AISI 1040...

Mercredi 22 octobre 2014

1. EN 10083-2 C35 steel equivalent materials: C35 steel plate is one mainly of high carbon steel, EN 10083 C35 steel plate is equal to JIS G4051 S 35C, DIN C35, UNI C35, NFA AF55-C35, UNE36011 C35K and AISI 1035. 2. EN10083-2 C35 steel application: C35 is used in the manufacture...

Mardi 12 août 2014

Quantité : 300,000pcs - Prix : $0.038 - $0.2

- Cosmetics tube - 1.Diameters: 13.5mm/16mm/19mm/22mm/25mm/28mm/30mm/32m m/35mm/38mm 2.Screw Thread: M6/M7/M9/M11/M12/M15/M16 3.Printing&color: Offset Printing; white/silver/yellow etc roller coating,and 1 to 6 colors printing 4.Caps: Screw caps or Standup(top-slip) caps...

Vendredi 01 août 2014

Quantité : 3000 sets/

Brief introduction: HSG metal and non-metal laser cutting machine B1325M is a multifunctional machine which is used in sheet metal, advertising and other industries. So our machine can used in a widely range of business that can help you to reach you requirement and make much more profit...

Vendredi 01 août 2014

Quantité : 3000 sets/

Brief introduction: HSG metal and non-metal laser cutting machine B1325M is a multifunctional machine which is used in sheet metal, advertising and other industries. So our machine can used in a widely range of business that can help you to reach you requirement and make much more profit...

Vendredi 01 août 2014

Quantité : 3000 sets/

Brief introduction: This laser cutting machine is widely used in wood, fabric, acrylic, bamboo, leather and other non-metal materials engraving and cutting. Specification: Working table(mm) 1300*2500 Laser power(w) 300/500 Weight(kg) 1500 Volume(m3) 8 Machine body...

Mercredi 30 juillet 2014

Quantité : 1-999pcs - Prix : 1-99$

Diamond Grinding Cup for Carbide Grinding General Introduction Prodrill can supply King, CME, Atlas, Sandvik tye diamond grinding cups. It's an ideal tool for grinding your broken and blunt button bits, to extend it's drilling life and serving time for saving up drilling costs...

Jeudi 24 juillet 2014

- Inverter arc welding machine - Product No.: ISN-2500 Maximum output power：65KW Weldable stud diameter：6~25mm Weight：120KG Product Description: Inverter arc stud welding machine 1. Widely used in construction, metallury,shipbuilding, vehicle manufacturing, industrial furnace etc...

Samedi 19 juillet 2014

Quantité : 1 square m - Prix : 74 dollars

Layer: 1 to 12 layers Material: FR-4, CEM-1, CEM-3, Hight TG, FR4 halogen free, FR-1, FR-2 Max. finished thickness: 0.4 to 4.0mm Max. finished board side: 500 x 500mm Min. drilled hole size: 0.25mm (10mil) Min. line width: 0.10mm (4mil) Min. line spacing: 0.10mm (4mil) Surface...

Samedi 19 juillet 2014

Quantité : 1 square m - Prix : 75 dollars

Layer: 1 to 12 layers Material: FR-4, CEM-1, CEM-3, Hight TG, FR4 halogen free, FR-1, FR-2 Max. finished thickness: 0.4 to 4.0mm Max. finished board side: 500 x 500mm Min. drilled hole size: 0.25mm (10mil) Min. line width: 0.10mm (4mil) Min. line spacing: 0.10mm (4mil) Surface...

Samedi 19 juillet 2014

Quantité : 1 square m - Prix : 75 dollars

Layer: 1 to 12 layers Material: FR-4, CEM-1, CEM-3, Hight TG, FR4 halogen free, FR-1, FR-2 Max. finished thickness: 0.4 to 4.0mm Max. finished board side: 500 x 500mm Min. drilled hole size: 0.25mm (10mil) Min. line width: 0.10mm (4mil) Min. line spacing: 0.10mm (4mil) Surface...

Samedi 19 juillet 2014

Quantité : 1 square m - Prix : 75 dollars

Layer: 1 to 12 layers Material: FR-4, CEM-1, CEM-3, Hight TG, FR4 halogen free, FR-1, FR-2 Max. finished thickness: 0.4 to 4.0mm Max. finished board side: 500 x 500mm Min. drilled hole size: 0.25mm (10mil) Min. line width:1px"margin-left: 4.95pt;"> Localisation : 2F East, B1 Building...

Samedi 19 juillet 2014

Quantité : 1 square m - Prix : 74,00 €

Layer: 1 to 12 layers Material: FR-4, CEM-1, CEM-3, Hight TG, FR4 halogen free, FR-1, FR-2 Max. finished thickness: 0.4 to 4.0mm Max. finished board side: 500 x 500mm Min. drilled hole size: 0.25mm (10mil) Min. line width: 0.10mm (4mil) Min. line spacing: 0.10mm (4mil) Surface...

Samedi 19 juillet 2014

Quantité : 1 square m - Prix : 75 dollars

Layer: 1 to 12 layers Material: FR-4, CEM-1, CEM-3, Hight TG, FR4 halogen free, FR-1, FR-2 Max. finished thickness: 0.4 to 4.0mm Max. finished board side: 500 x 500mm Min. drilled hole size: 0.25mm (10mil) Min. line width: 0.10mm (4mil) Min. line spacing: 0.10mm (4mil) Surface...

Jeudi 19 juin 2014

Brief introduction: This laser cutting machine is widely used in wood, fabric, acrylic, bamboo, leather and other non-metal materials engraving and cutting. Specification: Working table(mm) 1300*2500 Laser power(w) 300/500 Weight(kg) 1500 Volume(m3) 8 Machine body...

Vendredi 13 juin 2014

Components: - 30cm PVC tube, - butterfly wing, - needle connector - with cap or without cap Minimal quantity: 200,000 pcs Sterilization: E.O. gas Packaging: PE bag individually, 100 pcs per inner box, 2000 pcs per carton, 55*38*27cm; Advantages: Sharp and smooth needle to reduce...

Mardi 10 juin 2014

Quantité : 3000m - Prix : USD0.10~USD5.00

article: nappe en toile cirée / vinyle Description: 0.05MM-0.25MM PVC 30 G-100G/NON-WOVEN/FLANNEL support, visage sigle imprimé, double face imprimée etc .. Taille: de base sur la largeur requested.MAX du client: 185cm package: Par rouleaux ou par PCS. MOQ: 2000 m / PCs / conception...

Samedi 07 juin 2014

Quantité : 1 - Prix : Get Latest Price

IPL épilation / Elight IPL RF épilation beauté équipement Ce qui est e- lumière( ipl+rf) de la technologie? E- lumière, la technologie de fréquence radio combiné ipl, utilise la fréquence radio( rf.) et intense pulsed light( ipl) des énergies par les différences d'impédance entre...

Jeudi 24 avril 2014

Spherical cast tungsten carbide powder Character: the microstructure of spherical cast tungsten carbide is homogeneous, dense and featherlike structure, and spherical cast tungsten carbide has stable chemical properties, good processing performance high hardness, good wear resistance...

Mardi 22 avril 2014

Quantité : 1 Square M - Prix : 800-3000USD

Introduction Glare-led Outdoor LED display solution, IP65 rated outdoor display products that deliver high-resolution full color images with unequalled brightness and contrast levels.Our product ranges offer a modular outdoor display concept that allows the build-up of almost any...

Vendredi 11 avril 2014

Trade Info Price: US $5.0/ Piece View More Trade Terms: FOB, CIF Payment Terms: L/C, T/T Price Valid Time: From Apr 03, 2014 To Oct 10, 2014 Basic Info. Export Markets: Global Additional Info. Company: Taicang Zhongbo Railway Fastening Co., Ltd. Product Description...

Vendredi 11 avril 2014

Quantité : 1000pcs - Prix : 0,30 €

Place of Origin Guangdong, China (Mainland) Brand Name KH Model Number KHN40561AB1D-1 Usage Indoor Tube Chip Color Blue Display Function Video Pixels 25mm Screen Dimension 14.2mm plarity common anode or common cathode lead time 7-10days chip sources Taiwan USA...

Lundi 31 mars 2014

Quantité : 1 - Prix : negotiable

Welcome to contact us. www dot actuator8 dot com mail-- actuator at attachment8 dot com A&S Actuators Co, Ltd is a professional supplying company specialized in supplying a wide range of electronic and machinery components products. The internation brands of cylinders we offered...