PROPERTIES - 6547 Annonces

Vendredi 10 novembre 2023

Perforated Sheet Metal Panels Cutting seam : the slit of the laser cutting aluminum plate is generally 0.1mm-0.2mm Cutting surface : the cutting surface of the laser-cut aluminum plate has no burrs and no dross. Small thermal deformation : laser processing laser slits are fine, fast...

Jeudi 09 novembre 2023

Quantité : 1200sets/y - Prix : USD10000-200000

DK77 series high speed wire cut EDM has non-resistors HF power with Max cutting speed higher than 300mm2/min, Max cutting thickness is higher than 1000 mm. High accuracy linear guide way, ball screw and strong machine body with good rigidity to make sure good performance of cutting accuracy...

Jeudi 09 novembre 2023

Description of Galvanized Steel Coils Hot-dip galvanized steel coils are produced by passing the acid-washed and calendered full hard plate through the zinc tank, thereby galvanizing the film on the surface. Hot rolled galvanized steel coil with good raw materials and 7 times the...

Jeudi 09 novembre 2023

Description of Direct Reduced Iron (DRI in Steel Plant) Direct reduced iron (DRI), also called DRI sponge iron, is produced from the direct reduction of iron ore (in the form of lumps, pellets, or fines) to iron by a reducing gas or elemental carbon produced from natural gas or coal...

Jeudi 09 novembre 2023

Quantité : 1 - Prix : 1,00 €

Application Un testeur de thermoscellage est un appareil utilisé dans l'industrie de l'emballage pour évaluer les propriétés de thermoscellage de divers matériaux, tels que les films, les stratifiés et autres composants d'emballage. La résistance et l'intégrité du thermoscellage de...

Jeudi 09 novembre 2023

Prix : $2.5/kg-6.8/kg

Zinc powder is the most important electrochemical antirust pigment. A primer made with a large amount of zinc powder is called a zinc-rich primer. Zinc-rich paint is divided into an inorganic zinc rich primers with silicate as binder and epoxy zinc-rich primer with epoxy resin as a binder...

Jeudi 09 novembre 2023

Prix : $2.5/kg-6.8/kg

The waterborne acrylic coatings is composed of acrylic emulsion, pigments, etc. The water-based acrylic topcoat is a one-component coating with water as the diluent, and the paint film has good gloss and excellent performance. Water-based acrylic topcoat is mainly used in mild to...

Mercredi 08 novembre 2023

β mannanase is a feed hemicellulase fermented by the improved strains using a liquid fermentation technique, and produced by an advanced post-treatment technique. It has properties of high activity, high quality, and good heat-resistant. Specification of beta mannanase enzyme Name...

Mercredi 08 novembre 2023

Quantité : 9000tons - Prix : $12~15/kg

TTA28 (Tetra hydroindene dioxide) is a typical cycloaliphatic epoxy resin mixture. As a kind of specialty epoxy resins, its molecular structure is characterized by the saturated double cycloaliphatic epoxy structure without an ester bond, small molecular weight, and extremely low halogen content...

Mercredi 08 novembre 2023

Description of Calcium Aluminate Cement Calcium high temperature alumina cement, alumina cements or high alumina cements are obtained by the reaction at high temperature of lime (from limestone) and alumina (contained in natural minerals like bauxite). The aluminate cement obtained...

Mercredi 08 novembre 2023

Quantité : 9000tons - Prix : $12~15/kg

TTA3150 poly [(2-ethylene epoxide) - 1,2-cyclohexanediol] 2-ethyl-2 - (hydroxymethyl) - 1,3-propylene glycol ether is a typical cycloaliphatic epoxy resin, which contains very little chloride ions and chloride salts. It has the characteristics of high transparency, high heat resistance...

Mercredi 08 novembre 2023

What is High Alumina Cement High Alumina Cement (HAC, sometimes known as calcium aluminate cement (CAC) or aluminous cement) is composed of calcium aluminates, unlike Portland cement which is composed of calcium silicates. It is manufactured from limestone or chalk and bauxite. High...

Mercredi 08 novembre 2023

Description of Calcium Aluminate Cement Calcium aluminate cement, alumina cements or high alumina cements are obtained by the reaction at high temperature of lime (from limestone) and alumina (contained in natural minerals like bauxite). The aluminate cement obtained after cooling...

Mardi 07 novembre 2023

Nanofiber media is composed of nano scale diameter fibers. Small size effect gives nano fibers excellent properties and finer diameter. With smaller pore size and higher porosity, nanofiber filter material can be widely used in many applications. Mingguan Micro-nano fiber fabric is...

Mardi 07 novembre 2023

TEX 90 refers to the thickness or weight classification of heavy duty thread, specifically for sewing polyester thread. It is a measurement of the thread's linear density, indicating how many grams one kilometer of the thread weighs. TEX is the metric system unit of measurement for thread size...

Mardi 07 novembre 2023

Thread is a small piece of a sewing project but its importance is undeniable. Selecting the right tent sewing thread for your application ensures that you will get the best-performing seams. Please keep in mind the end location of the projects while choosing the strong sewing thread used...

Mardi 07 novembre 2023

SINOFLOC nonionic flocculant are technically pure polyacrylamides. Nonionic polyacrylamide exhibits neutral nonionic properties in the aqueous solution which is hardly influenced by the PH value in the application. SINOFLOC nonionic polyacrylamide flocculant are suitable for use as...

Samedi 04 novembre 2023

Quantité : 20MT

Hot work die steel, also known as hot work tool steel, is a type of steel specifically designed to withstand high temperatures and severe mechanical stress during hot forming processes such as forging, extrusion, and die casting. It is used to create and shape metal components that...

Samedi 04 novembre 2023

Quantité : 20MT

Forged round steel bar is made in cylindrical shape, which can be shaped in direct forging or re-forging into structural parts, bearings and different kinds of components and so on. Main parameters of Forged Round Bar Forged round bar diameter below 600mm Common technical standards...

Samedi 04 novembre 2023

Quantité : 20MT

Hot work die steel, also known as hot work tool steel, is a type of steel specifically designed to withstand high temperatures and severe mechanical stress during hot forming processes such as forging, extrusion, and die casting. It is used to create and shape metal components that...

Vendredi 03 novembre 2023

CX2020A high-frequency induction heating converter is designed to work at the frequency range of 50~120KHz and its output power range is 10KW. It is often used for induction brazing, welding, small parts forging heating and heat treatment. The core component of this high frequency...

Vendredi 03 novembre 2023

The working frequency of CX series high frequency induction heating machine module covers 50KHZ ~ 120KHZ. You can find the existence of this high-frequency induction heating machine series in induction welding, tool welding, pipe welding, thermal nesting, thermal packaging, etc. Types...

Vendredi 03 novembre 2023

Make your thoughts more reality! The Medical Simulation Model from surgical simulator manufacturer Preclinic Medtech is designed based on clinical imaging data and manufactured by 3D printing and other state-of-the-art technologies, with a highly vivid anatomical structure and operational sense...

Vendredi 03 novembre 2023

Quantité : 1000tons - Prix : 0.01-100 USD/PCS

When we buy industrial magnets, we will encounter various selection problems. This article will introduce the related introduction of industrial magnets. Industrial magnets are high-strength magnets, and some of their properties make them ideal for industrial applications. Increasingly...

Vendredi 03 novembre 2023

Quantité : 1000tons - Prix : 0.01-100 USD/PCS

Material Sintered Neodymium Iron Boron Dimensions Diameter Min.1 mm—Max.60 mm Tolerance Standard +/-0.05mm, Min.+/-0.02mm Magnetization Orientation Axial / Diametrical Magnetic Properties Grade Max. Operating Temperatures N35-N52 80°C (176°F) 33M- 48M 100°C (212°F)...

Vendredi 03 novembre 2023

Quantité : 1000tons - Prix : 0.01-100 USD/PCS

Sintered neodymium magnet is the strongest magnetic material commercially available today. It is largely made of alloy of neodymium, iron and boron, and the chemical formula is Nd2Fe14B. Sintered NdFeB neodymium magnet exhibits high magnetic energy product in small size with high...

Vendredi 03 novembre 2023

Quantité : 1000tons - Prix : 0.01-100 USD/PCS

Material Sintered Neodymium Iron Boron Dimensions Outer Diameter Min.3.0 mm—Max.200 mm Inner Diameter Min.1.5 mm—Max.150 mm Height Min.0.5 mm—Max.50 mm Tolerance Standard +/-0.05mm, Min.+/-0.01mm Magnetization Orientation Axial, Diametrical, Radial Magnetic Properties Grade Max...

Vendredi 03 novembre 2023

Prix : $0.5-200.00

Optical Prism, a transparent object surrounded by two planes that intersect but are not parallel to each other, is used to split light or disperse light beams. An optical prism is a polyhedron made of transparent materials (such as optical glass prism, optical crystal prism, etc.)...

Vendredi 03 novembre 2023

Quantité : 50 set/one - Prix : 800usd~200000usd

What is Plastic Welding and What is Plastic Welding Used for? Automatic pipe welding machine & cutting machines are necessary for metal pipe procedure. The pipe cutting machine can cut plastic pipe fittings into different angles according to the needs of customers. The cutting...

Vendredi 03 novembre 2023

Prix : $0.5-200.00

A cylindrical optical lens is typically used to focus, condense or expand incoming light. A cylindrical optical lens has one cylindrical surface, causing light to be focussed in a single dimension or axis. It can also be used to expand the output of a laser diode into a symmetrical beam...