LUER - 138 Annonces

Lundi 15 juillet 2019

Syringe filters are widely used in laboratories. The users do not need to change membranes and clean filters, which can save complex and time-consuming preparations. It is very convenient and easy to operate. They are mainly used in sample pre-filtration, clarification, degerming of particles...

Jeudi 11 juillet 2019

The polyethersulfone (PES) syringe filter with the feature of low protein binding and has excellent flow rates is mainly used for sterilizing or clarify viscous proteinaceous solutions especially in the life-science applications biological and pharmaceutical labs, this is because...

Jeudi 04 juillet 2019

As a single-use, membrane-based device, syringe filter is used for the removing particulate impurities from small (less than 100 mL) liquid samples in the lab. For different applications, the syr inge filter are used in for fast and efficient filtration, material purification, and sterilization...

Jeudi 04 juillet 2019

As a single-use, membrane-based device, syringe filter is used for the removing particulate impurities from small (less than 100 mL) liquid samples in the lab. For different applications, the syr inge filter are used in for fast and efficient filtration, material purification, and sterilization...

Mercredi 03 juillet 2019

Flash column chromatography is an efficient way to separate complex mixtures of compounds in the lab. we use compressed air to push the solvent through the column when we are running flash columns. It can help provide better separation and cut down the running time as while. Flash...

Samedi 18 mai 2019

0.22um Syringe Filters Features of Filtstar Series Activated Carbon Syringe Filters H ydrophobic Syringe Filter Inner diameter: 50 mm out diameter: 60 mm and pore size of 5 μm Luer Lock Inlet Tip Makes Secures Connections & avoid Blowoff Advantages of Filtstar Series Activated...

Dimanche 20 janvier 2019

Latex I.V Set 1.Transparent vial holder and tube is made of silicon. 2.White clamp for easy adjusting the flux. 3.Brass charom plated connection. 4.Luer lock adaptor with needle. Localisation : Block 8, Shangjing Masion, Panlongcheng Economic Development Zone, Huangpi District, 430300 Hubei...

Samedi 12 janvier 2019

Disposable Aluminium Hub Needle Ultra-sharp, tri-bevelled, anti-coring needle. Precision luer-lock aluminum hub. Stainless steel cannula. Coated with a silicons polymer. Two pieces rigid pack. Sterile. Cartridges are color-coded to follow industry standards providing easy gauge identification...

Samedi 12 janvier 2019

Veterinary Reusable Stainless Steel Needles SUS304 Stainless Steel needle Tri-beveled. 18mm Luer-lock Copper Hub Needle & hub rivet connection in five direction. Re-usable use. 1 dozen per plastic box. Localisation : Block 8, Shangjing Masion, Panlongcheng Economic Development Zone...

Samedi 12 janvier 2019

Manual Drencher Veterinary Manual Drencher: 5ml 10ml 20ml 30ml 50ml. 1. Material: Poly 4-methyl-pentene (TPX) 2. Accuracy: 5ml: 1-5ml, 10ml: 1-10ml, 20ml: 1-20ml, 30ml: 2.5-30ml, 50ml: 5-50ml. 3. Luer-lock adapter. 4. Sterilizable : -30°C-120°C. Localisation : Block 8, Shangjing Masion...

Samedi 12 janvier 2019

Disp osable Syringe Side Tip Disposable Syringe Side Tip with or without needle Sterile Size: 5ml, 10ml, 20ml, 30ml, 50ml etc Luer slip Package PE bag pack or blister pack Localisation : Block 8, Shangjing Masion, Panlongcheng Economic Development Zone, Huangpi District, 430300 Hubei...

Samedi 12 janvier 2019

TPX luer lock Plastic Steel Syringe Veterinary Plastic Steel Syringe Type B: 20ml. 1. Material: Poly 4-methyl-pentene (TPX). 2. Accuracy : 1-20ml. 3. Luer-lock adapter. 4.Graduated piston rod, with dosing ring. 5. Sterilizable : -30°C-120°C. Localisation : Block 8, Shangjing Masion...

Samedi 12 janvier 2019

TPX Syringe Without Graduation Veterinary Plastic Steel Syringe C-Type, 10ml, 20ml, 30ml, 50ml 1. Material: Poly 4-methyl-pentene (TPX) or Polycarbonate (PC) 2. Accuracy : 10ml: 1-10ml, 20ml: 1-20ml, 30ml: 2.5-30ml, 50ml: 5-50ml. 3. Luer-lock adapter. 4. Sterilizable : -30°C-120°C...

Samedi 12 janvier 2019

TPX Syringe With Graduation Veterinary Plastic Steel Syringe Type D : 10ml, 20ml, 30ml, 50ml 1. Material: Poly 4-methyl-pentene (TPX) or Polycarbonate (PC) 2. Accuracy : 10ml: 1-10ml, 20ml: 1-20ml, 30ml: 2.5-30ml, 50ml: 5-50ml 3. Luer-lock adapter 4. Graduated Piston Rod, with dosing ring 5...

Samedi 12 janvier 2019

Offset Type TPX Syringe Without Graduation Veterinary Plastic Steel Syringe Type E : 20ml, 30ml, 50ml 1. Material: Poly 4-methyl-pentene (TPX) 2. Accuracy: 20ml: 1-20ml, 30ml: 2.5-30ml, 50ml: 5-50ml. 3. Luer-lock adapter. 4. Sterilizable : -30°C-120°C. Localisation : Block 8, Shangjing Masion...

Samedi 12 janvier 2019

Offset Type TPX Syringe With Graduation Veterinary Plastic Steel Syringe Type F : 20ml, 30ml, 50ml 1. Material: Poly 4-methyl-pentene (TPX) 2. Accuracy: 20ml: 1-20ml, 30ml: 2.5-30ml, 50ml: 5-50ml. 3. Luer-lock adapter. 4. Graduated Piston Rod, with dosing ring. 5. Sterilizable : -30°C-120°C...

Samedi 12 janvier 2019

5ml, 10ml, 20ml, 30ml Veterinary TPX Plastic Steel Injector Veterinary Plastic Steel Syringe Type G : 5ml, 10ml, 20ml, 30ml 1. Material: Poly 4-methyl-pentene (TPX) 2. Accuracy: 5ml: 1-5ml, 10ml: 1-10ml, 20ml: 1-20ml, 30ml: 2.5-30ml, 50ml: 5-50ml. 3. Luer-lock adapter. 4. Sterilizable : 110°C...

Samedi 12 janvier 2019

Offset Style Veterinary TPX Plastic Steel Injector Syringe Veterinary Plastic Steel Syringe Type H(Offset-style TPX) : 100ml 1. Material: Poly 4-methyl-pentene (TPX) 2. Accuracy: 10-100ml. 3. Luer-lock adapter. 4. Sterilizable : 110°C. Localisation : Block 8, Shangjing Masion, Panlongcheng...

Samedi 12 janvier 2019

10ml 20ml 30ml 50ml Veterinary Luer Lock Plastic Steel Syringe Veterinary Plastic Steel Syringe Type J : 10ml 20ml 30ml 50ml. 1. Material: Poly 4-methyl-pentene (TPX) 2. Accuracy: 10ml: 1-10ml, 20ml: 1-20ml, 30ml: 2.5-30ml, 50ml: 5-50ml. 3. Luer-lock adapter. 4. Sterilizable : -30°C-120°C...

Samedi 12 janvier 2019

TPX Syringe With Drencher Tube TPX Syringe With Drencher Tube : 5ml 10ml 20ml 30ml 50ml. 1. Material: Poly 4-methyl-pentene (TPX) 2. Accuracy: 5ml: 1-5ml, 10ml: 1-10ml, 20ml: 1-20ml, 30ml: 2.5-30ml, 50ml: 5-50ml. 3. Luer-lock adapter. 4. Sterilizable : -30°C-120°C. Localisation : Block 8...

Samedi 09 décembre 2017

100ml Henso Disposable Pediatric Burette Infusion Set with Micro Drip 1)100ml and 150ml graduated burette with shut-off valve 2)60 drops=1±0.1ml 3)Flexible drip chamber with filter 4)Slip or lock adapter with protective cap 5)Latex/Latex-free injection site 6)ABS Spike,air vented with cap...

Samedi 09 décembre 2017

Infusion Set with Air Filter Opaque 1) Infusion set with air filter 2) 15/20/60 Drops=1 ± 0.1ml 3) Flexible Drip Chamber 4) Flow Precise Controller 5) Slip or Lock Adapter 6) Injection Site 7) For Gravity Use 8) Sterile Infusion Set/ iv Infusion Set/ Disposable Infusion Set Product...

Samedi 09 décembre 2017

2ml luer lock/ luer slip disposable syringe 2 ml Disposable syringe is made of medical plastic, rubber and stainless steel needle; sterile, pyrogen free and non-toxic. Syringe instruction: transparent plastic barrel with measurements, plastic plunger, rubber piston (but latex free)...

Samedi 09 décembre 2017

luer lock/ luer slip disposable syringe 3ml Disposable syringe is made of medical plastic, rubber and stainless steel needle; sterile, pyrogen free and non-toxic. Syringe instruction: transparent plastic barrel with measurements, plastic plunger, rubber piston (but latex free), hypodermic...

Jeudi 29 juin 2017

Luer Lock Injection Mould for medical device Mold construction Product name Luer Lock Injection Mould for medical device raw material ABS no. of cavity 16 core & cavity S136 STAVAX,harden HRC50-54 tool base standard, HRC28-32 Best Hope Mold & Plastic Co., Ltd is...

Jeudi 29 juin 2017

I. V. Drip Chamber Plastic Injection Mould for Medical Use PVC chamber what we always do including following. 2 plate or 3 plate mold, feeding gate on top or edge all have experience, as well as how to control PVC soft production. 54mm IV drip chamber, 16 or 24 cavity. 62mm IV drip chamber...

Jeudi 29 juin 2017

BHM has a long experience of researching, developing and manufacturing quality injection moulds for Hemodialysis blood line components: 1. Mold for Dialyzer connector(wing shaped) and Dialyzer connector Cap 2. Mold for Drip chamber & chamber cover 3. Mold for Blood filer inlay chamber...

Jeudi 29 juin 2017

Our factory is a leading plastic parts molds manufacturer in China. We have a lot of experiences in making excellent plastic molds. Depending on skilled workers, experienced designers, our molds are of high quality and reasonable price. More advantages are below: To produce injection...

Dimanche 28 août 2016

Prix : 10,00 €

Brief description--Prefilled syringesSterilized glass syringes,Website: http://www.pharm-pack.com, borosilicate 5.0 glass body. Luer lock and needle.Logo or text can be printed Production capacity: 300,000 pieces per dayCountry of origin: ChinaProduct Description--Prefilled syringesItem...

Vendredi 19 août 2016

Quantité : 10000 - Prix : US $ 0.12 - 0.65

https://greatcaremedicalgroup.en.alibaba.com/product/60211355377-803669612/Safety_IV_cannula_pen_like_iv_c atheter_iv_cannula_with_injection_port.h tml I.V Catheter(I,V Cannula) ·Easy dispenser pack. ·Color-coded casing cap allows for easier identification of catheter size. ·Can...