FLEXURAL - 385 Annonces

Samedi 09 juillet 2022

Reinforced with 20% of glass fiber on substrate PA66 is called PA66 GF20, it improves dimensionally stabilized and impact resistance for injection moulding. Typical Application of PA66 GF 20 (A2000D) PA GF20 is applied to various precision gears due to its high rigidity, dimensional stability...

Samedi 09 juillet 2022

Pa6 6 gf15 is Nylon66 and 15% Glass-Filled, these materials are performed with medium stiffness and strength but it has much better mechanical properties over unfilled granules. Reinforced with 15% of glass fiber and modified Nylon 66 in Anmei plastic plant combined with other property...

Samedi 09 juillet 2022

Transparent ABS, also called MABS plastic material, which has excellent transparency, impact toughness and good processing properties. The light transmittance of transparent ABS is about 88%, second only to PMMA (91%) and PC (90%). The main manufacturers of this MABS plastic material...

Samedi 09 juillet 2022

PC-ABS is a blend of PC and ABS. If the two materials are simply mixed and then injected directly, the effect is very poor, and delamination will occur. The advantages of PC are rigidity and toughness, but the disadvantages are stress cracking and high viscosity. The advantage of...

Samedi 09 juillet 2022

Pa6gf50 is a fiber reinforced plastic made of nylon 6 resin as a base material and 50% glass fiber as a reinforcing filler, and various processing aids be added. Typical Application of PA6 GF50 (A1011J) PA GF50 is used to manufacture high-strength and high wear-resistant structural...

Samedi 09 juillet 2022

Polyamide 6 reinforced with 45% Glass Fibers that is PA GF45, medium viscosity and dimensional stability, this material pa 6 has excellent rigidity and high tensile and compressive strength successfully applying to engineering structure parts of mechanical engineering and in the automotive...

Samedi 02 juillet 2022

BOYA fine blanking production division, the products are good stability and reliability, high degree of automation, high production efficiency, simple operation and ergonomic. For localization of high-end intelligent fine blanking equipment, raise the capacity of fine blanking production...

Samedi 28 mai 2022

Hybrid Bonded Magnetic Compounds Introductions： By mixing different kinds of magnetic powder in different proportions, we can obtain a series of hybrid magnets whose magnetic properties are higher than ferrite bonding magnet and lower than bonded neodymium (anisotropic) magnet, which...

Samedi 28 mai 2022

High-density plastic has a density of up to 13g/cm3 by adding high-density powder to the plastic matrix, which is higher than that of ordinary metal. It can be used as a shielding enclosure for high-energy rays, counterweight material, substitute material for lead, etc. Properties...

Samedi 28 mai 2022

Light density and low cost of ferrite bonded magnetic compounds (hard ferrites magnets) create a high-cost performance. Therefore, it has the largest market demand and is the most extensively used in the field of modern home appliances, office supplies, communication devices, and defense...

Samedi 28 mai 2022

Bonded Neodymium Magnetic Compounds Introductions Bonded neodymium magnets (bonded NdFeB magnet) has high mechanical performance and no need for surface coating and other processes, which can effectively avoid the shortcomings of brittle and poor corrosion resistance of sintered NdFeB magnet...

Mercredi 25 mai 2022

Quantité : 1000Kgs - Prix : USD1~2000/Kg

Bis 3 trimethoxysilyl propyl amine SiSiB® PC1118 is a secondary aminofunctional silane possessing two symmetric silicon atoms. SiSiB® PC1118 may act as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics...)

Mercredi 25 mai 2022

Quantité : 1000Kgs - Prix : USD1~2000/Kg

3 Aminopropyltrimethoxysilane SiSiB® PC1110 is an amino-functional silane that may be used over a broad range of applications to give an improvement in the bond between a substrate, filler or reinforcement and resins that react with the amino group. It is the equivalent of Momentive's A-1110...

Mercredi 25 mai 2022

Quantité : 1000Kgs - Prix : USD1~2000/Kg

Bis 3 triethoxysilyl propyl amine SiSiB® PC1108 is a yellowish liquid with an amine-like odor. It is the equivalent of Evonik's Dynasylan 1122. SiSiB® PC1108 amino silane may act as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic...

Mercredi 25 mai 2022

Quantité : 1000Kgs - Prix : USD1~2000/Kg

Hydrolysate of 3-Aminopropyltriethoxysilane SiSiB® PC1106 is an aqueous solution of 3 Aminopropylsilanetriol. SiSiB® PC1106 hydrolysate is an amino-functional silane which acts as an adhesion promoter between inorganic materials (glass, metals and fillers) and organic polymers (thermosets...)

Samedi 21 mai 2022

Quantité : 2000 tons/ - Prix : USD0.8-1.3/kg

This fiber is made of cold-drawn wire. Because of its high tensile strength, good toughness, and low price, it is often used as a substitute for glued steel fibers. Compared with traditional concrete, this kind of steel fiber has a great improvement in crack resistance and antiknock performance...

Samedi 21 mai 2022

Quantité : 2000 tons/ - Prix : USD0.8-1.3/kg

This kind of steel fiber has the best comprehensive effect, and the best combination of high strength, high flexural strength (more than 10 times continuously) and the strongest anchoring force. It also has good dispersion in concrete. which is widely used in industrial floors, high-way speed...

Samedi 21 mai 2022

Quantité : 2000 tons/ - Prix : USD0.8-1.3/kg

The glued steel fiber has the best comprehensive effect, and the best combination of high strength, high flexural strength (more than 10 times continuously) and the strongest anchoring force. It is widely used in industrial floors, mortar reinforcement, shotcrete, tunnel and etc....

Samedi 21 mai 2022

Quantité : 2000 tons/ - Prix : USD 0.8-1.3/kg

There are many types of steel fibres used in concrete used in concrete. The shotcrete steel fibre for concrete reinforcement is a new kind of metal material, in order to enhance concrete with metal fiber and shotcrete in its hardened state. Tengzhou SDS steel fibers make concrete...

Mercredi 20 avril 2022

Quantité : more than - Prix : 3000-6500 euro per M

Anode Carbon Block Overview It participates in electrochemical reactions and directs current into the electrolytic cell. Each prebaked carbon anode block is preassembled by 1 ~ 3 anode carbon blocks, anode guide rod and steel claw (see anode carbon block assembly). The single anode...

Mercredi 20 avril 2022

Quantité : more than - Prix : 3000-6500 euro per M

According to the classification of electric furnace steelmaking power level and the difference of raw materials used for producing Graphite electrodes as well as the physical and chemical indexes of finished product, graphite electrodes are divided into three types: regular power...

Samedi 26 mars 2022

Hybrid Bonded Magnetic Compounds Introductions： By mixing different kinds of magnetic powder in different proportions, we can obtain a series of hybrid magnets whose magnetic properties are higher than ferrite bonding magnet and lower than bonded neodymium (anisotropic) magnet,...

Samedi 26 mars 2022

High-density plastic has a density of up to 13g/cm3 by adding high-density powder to the plastic matrix, which is higher than that of ordinary metal. It can be used as a shielding enclosure for high-energy rays, counterweight material, substitute material for lead, etc. Properties...

Mardi 22 mars 2022

This kind of steel fibres has the best comprehensive effect, and the best combination of high strength, high flexural strength (more than 10 times continuously) and the strongest anchoring force. It also has good dispersion in concrete. which is widely used in industrial floors, high-way speed...

Jeudi 17 mars 2022

This fiber is made of cold-drawn wire. Because of its high steel fiber tensile strength, good toughness, and low price, it is often used as a substitute for glued steel fibers. Compared with traditional concrete, this kind of steel fiber has a great improvement in crack resistance...

Jeudi 17 mars 2022

The glued steel fiber has the best comprehensive effect, and the best combination of high strength, high flexural strength (more than 10 times continuously) and the strongest anchoring force. It is widely used in industrial floors, mortar reinforcement, shotcrete, tunnel and etc....

Jeudi 17 mars 2022

There are many steel fibre types . The shotcrete steel fibre for concrete reinforcement is a new kind of metal material, in order to enhance concrete with metal fiber and shotcrete in its hardened state. Tengzhou SDS steel fibers make concrete have extremely high flexural strength...

Mercredi 12 janvier 2022

Quantité : 1000t/m - Prix : 3-16 USD

PA 66 GF 50 is a fiber-reinforced plastic made of Nylon 66 resin as a base material and 50% glass fiber as a reinforcing filler, and various processing aids be added to be used in injection molding products. Typical Application of PA66GF50(A2011J) PA66 50%GF HB grade is applied to...

Mercredi 12 janvier 2022

Quantité : 1000t/m - Prix : 3-16 USD

PA66 GF45 is a 45% glass fiber reinforced polyamide 6.6 with high stiffness and strength. Typical Application of PA66 GF45 (A2011I) PA66 45%GF HB grade is applied to the gear field, it requires high strength, high toughness and dynamic balance and applied to the field of sports equipment...

Mercredi 12 janvier 2022

Quantité : 1000t/m - Prix : 3-16 USD

PA66 is nylon 66, namely polyamide 66. GF is glass fiber. Generally expressed as pa 6.6 gf 35, that is, 35% glass fiber is added to nylon 66. Typical Application of pa 66 gf 35(A2000G) It is applied to lamp holder cover and cooling fan, gears and various electronic connectors, wear-resistant...