FRICTION - 1977 Annonces

Samedi 16 avril 2022

7CF® Chain Lube Spray is an aerosol product that can form a Teflon high-strength adhesion lubricating coating after use, contains PTFE, synthetic high heat resistant lubricant. Providing strong lubrication, high anti-friction, excellent rust and corrosion for chains, open gears and...

Samedi 16 avril 2022

Types of vehicle clutch plate Suitable for Scania The application can transmit large torque, but the structure is complex, suitable for medium and heavy machinery. The friction clutch transfers torque by the friction torque on the working surface. As a professional clutch disc supplier...

Samedi 16 avril 2022

Types of Clutch Disc Suitable for Renault Renault The disc 2 is fixed on the driving shaft. The disc 3 is connected with the driven shaft by a flat key or spline, and can be moved axially on the shaft. The two discs can be pressed tightly by the spring 5. When working, Relying on...

Samedi 16 avril 2022

Types of Clutch Disc Suitable for MAN Brand According to the operation mode, there are four types of mechanically operated friction clutches, electromagnetically operated friction clutches, hydraulically operated friction clutches and pneumatically operated friction clutches. The...

Samedi 16 avril 2022

Types of Clutch Disc Suitable for DAF When working, move the slip ring to the left. The two sets of friction plates are pressed by the lever and the pressure plate, and the clutch is in a combined state. If the slip ring is moved to the right, the friction plates are released and...

Samedi 16 avril 2022

When purchasing custom car clutch plate, you must pay attention to the quality of the clutch plates. There should be noclutch plates for car with deformation, warpage and poor tightness on the surface, which will not only cause the clutch to slip and stop production but also cause...

Samedi 16 avril 2022

The auto clutch cover is one of the constituent parts of the clutch assembly. The auto clutch cover supports and installs the clutch pressure plate, compression spring and the shell-shaped base part of the release lever mechanism. The car clutch cover is important to the car because...

Mardi 12 avril 2022

Quantité : 1500000 pc - Prix : 200-2000

This rear brushless RIM motor, easy to install, lower energy consumption, lower noise, reliable and durable. There is no brush rubbing, no energy is lost due to friction. Types of Ebike Brushless Motor DGW07-R16 Ebike Brushless Motor Except for the different sizes of these motors...

Mardi 12 avril 2022

The hose clamps plastic is new type structure fastener with strong mesh which is combined with various features of plastic and well-designed with precise tooth type structure to convert the acting force by adjustment of appearance structure. The hose clip plastic is common used new...

Samedi 09 avril 2022

All waterproof neodymium (NdFeB) magnets china under this category are completely made with rubber coated. Rubber coated neodymium(NdFeB） magnets have high durability and high friction. The rubber coating protects the neodymium magnet from debris and liquid contact.So rubber covered...)

Samedi 09 avril 2022

As a kind of rare earth strong magnet material, sintered NdFeB(neodymium) magnet is widely used in various fields because of its excellent magnetic properties. But NdFeB(neodymium) magnets are not waterproof or corrosion&rust resistant, unlike SmCo and ferrite magnets china. The...

Vendredi 08 avril 2022

Russian oak flooring is easy to take care of after being painted with a smooth surface. It has a good foot feeling, high hardness, resistance to friction, and strong water resistance. Simple style, strong texture, and the details show the taste. The texture is relatively clear, and...

Vendredi 08 avril 2022

Nylon sandwich flat belt belongs to high-speed drive belt with innovative and unique material structure. As a professional nylon belt manufacturer, we can offer a rubber nylon sandwich transmission belt and leather nylon core transmission belts. Benefit from our long-term research...

Vendredi 08 avril 2022

A high-speed tangential belt, also known as a polyamide-based high-speed drive belt, is a new type of flat belt, with high strength nylon core as the skeleton material. and as the tensile layer, and with high wear-resistant synthetic rubber as the surface friction layer. Using mature...

Vendredi 08 avril 2022

To meet the various demands of different customers and to better serve the application market, we can also offer roll belting materials such as rubber for flat belts. With producing ability about 600 000 m², we have served many customers all over the world. Our customer consists of...

Vendredi 08 avril 2022

Our company uses high-quality raw materials, coupled with advanced production technology, with more than 20 years of belt production experience, our products with high efficiency, low elongation, flexible and high fatigue resistance, good antistatic property, the friction coefficient...

Jeudi 07 avril 2022

The cooling tower sprinkler head is a special water distributor for small and medium-sized round counter flow cooling tower. Through the small holes on the water distribution pipe, the water is evenly spread on the filler, increasing the water vapor contact interface, so that part...

Jeudi 07 avril 2022

Quantité : 1-100 - Prix : USD 50000-5000000

Advanced crop process engineering machinical types of equipment, testing instruments, sophisticated manufacturing production technology in agriculture, and strict & perfect quality management system. Hongvadar agricultural product processing held the ISO9001 quality system certification...

Jeudi 07 avril 2022

PERFECT toothbrush Have you chosen your toothbrush correctly? Faced with different oral problems, choosing a best budget toothbrush will play an important role in improving. Perfct Toothbrush: your professional choice in different oral states. From prevention, improvement to special care...

Vendredi 01 avril 2022

Quantité : 1pc - Prix : 0.01-100 USD/PCS

Strong mounting magnets are comprised of powerful permanent magnets set inside steel cups or channels with countersunk holes or threaded features for holding applications. The steel structure redirects the magnetic field from the back-side of the magnet, making it much more stronger...

Samedi 19 mars 2022

Quantité : 10000 Piec - Prix : 150-10000USD

Overview of TCI Bit TCI drill bit is an important tool for oil drilling. When the cone bit is working, the cutting teeth alternately contact the bottom of the well, the rock breaking torque is small, the contact area between the cutting teeth and the bottom of the well is small...

Mardi 15 mars 2022

As one of the automotive oil filter manufacturers, our company offers various types of oil filters in automobile with affordable price. High temperature resistant and carbonized filter paper with composite fiber is used to make the filter effect efficient. The high-strength steel...

Mercredi 09 mars 2022

Prix : 100USD

What material is used in injection moulding？Materials used in injection moulding generally include pla molding, nylon injection molding, polypropylene plastic injection molding, pp injection moulding, pvc injection molding, hdpe injection molding and so on. Injection moulding raw...

Mercredi 09 mars 2022

Flat Rolling The sheet leveller of BOYA is not only rooted in the basic theory of material elastic-plastic deformation but also closely follows the world's cutting-edge technology. BOYA not only emphasizes learning from others but also insists on independent innovation. After years...

Mercredi 09 mars 2022

Name: Fumed silica Appearance: Fluffy white powder. Technical Data of Fumed Silica Item Indexes The nitrogen adsorption specific surface area/（m2/g） Typical values±30 Loss on ignition/% ≤ 2.5 Silica content/% ≥ 99.8 Suspension PH 3.7~4.5 Al2O3 content/（mg/kg） ≤ 400 TiO2...

Mardi 08 mars 2022

The slider is a mold component that can slide in a certain angle perpendicular to or with the opening and closing direction during the opening and closing action of the mold. Features of Mould Slide When the product structure makes it impossible for the mold to demould normally without...

Mardi 08 mars 2022

Metal Coating Machine Painting line refers to metal and non-metal surface covering protective layer or decoration layer special assembly line tool product advantages painting assembly line equipment is suitable for workpiece surface painting, plastic spray treatment. Such as the automobile...

Mardi 08 mars 2022

4" santoku knife, each knife with pp sheaths, the handle is smooth. It weighs 53 grams and is the length of 20.5cm, its blade is 10 cm long. The knife is a width of 2.0cm, and the back is a thickness of 1.55-1.65 mm. The handle is ABS. 4-inch ceramic santoku knife fits to slice fruits...

Mardi 08 mars 2022

Prix : 10-30USD

This stainless steel travel water bottle looks like a Coca-Cola beverage bottle, with a streamlined body, a narrow mouth, and a concave lid and bottom design, which not only improves beauty, but also increases friction to avoid slipping and easy to unscrew the lid. Double wall structure...

Mercredi 02 mars 2022

Owning many quality system certifications and patents, we can offer complete variety for texture roller coverings, and our rubber-coated roller tape product is diversified. By applying different materials and patterns on the surface, different surface characteristics can be realized...