OXIDES - 1365 Annonces

Lundi 26 avril 2021

Quantité : 1 - Prix : 0,10 €

Medical disposable use ureteral access sheath for urology ​ It is used for the establishment of surgical pathway for endoscopic surgery in Department of Urology. It helps endoscopy or other instruments to enter the urinary tract and provides a channel of continuous operation. And...

Lundi 26 avril 2021

Quantité : 1 - Prix : 0,10 €

Disposable Pressure Extension Lines/tube for medical disposable devices ​ The PVC tube/catheter of Lonyi uses medical grade PVC raw material and be extruded in the 10000/100000 level cleaning workshop. The size, color and structure can be made in accordance with the requirements of the customers...

Mercredi 14 avril 2021

Silver Copper Cable Electrical Cable with silver copper or pure silver conductor is called silver plated copper cable, usually used for speaker wires and for audiophiles which require the best sound quality. Silver Copper conductor is also used for some durable electrical wire because...

Jeudi 25 mars 2021

Quantité : 200 units/ - Prix : 7660-30650 usd

Pipe shot blasting machine or steel pipe shot blasting machine is suitable for any diameter and length of steel pipe cleaning, it can remove the oxide, rust, and scale from welded steel pipe, so that the pipe surface shows metallic colors. Pipe outer wall shot blasting machine Pipe...

Vendredi 19 mars 2021

Disinfectants are used to kill pathogenic microorganisms on the vector to achieve harmlessness, eliminate pathogenic microorganisms from the human body, cut off the transmission route of infectious diseases, and achieve the purpose of controlling infectious diseases. Disinfectants...

Mardi 09 mars 2021

The waste gas treatment equipment consists of multiple activated carbon adsorbers and a catalytic burner (complemented by low-pressure fans, valves, etc.). Exhaust gas is pretreated to remove dust and particulate matter, and then sent to activated carbon adsorber. Considering the...

Mardi 09 mars 2021

Our CNC turning service produces most cylindrical and conical shaped parts on the CNC lathes. CNC Turning is a machining process in which material bar is held by a chuck and rotated while a cutting tool is fed to the piece to remove material to create the expected shapes, our live...

Mardi 09 mars 2021

CNC prototyping is the fastest way that allows designers to rapidly verify designs and iterate ideas without tooling costs, CNC machining services are ideal to make rapid prototyping from plastic or metal, they are able to achieve tighter tolerance with better surface finishes compared...

Mercredi 03 mars 2021

Quantité : more than - Prix : 3000-6500 euro per M

Description of Direct Reduced Iron (DRI Steel) Direct reduced iron (DRI), also called sponge iron, is produced from the direct reduction of iron ore (in the form of lumps, pellets, or fines) to iron by a reducing gas or elemental carbon produced from natural gas or coal. Many ores...

Mercredi 13 janvier 2021

SK series twin screw extruder is the crystallization of more than 30 years'experience in the equipment manufacturing industry, more than 400 kinds of material technology application and thousands of working conditions verification of KY. Screw diameter can be selected from 26 mm to 135 mm...

Mercredi 13 janvier 2021

HK Series Co Rotating Twin Screw Extruder Nanjing KY provides more material selections for the process parts of the HK Series Twin screw extruder. Besides standard nitriding steel and tool steel, the HIP materials made in China also provide higher wear resistance for machines. Different...

Mercredi 13 janvier 2021

Quantité : 3 million - Prix : N/A

HomeProductsPlastic CardsCustomized Plastic Card Accessories Customized card accessories are applied on ordinary plastic cards to achieve data input and record, highlighting the design focus and anti-counterfeiting features. It includes id card accessories and plastic card accessories...

Samedi 09 janvier 2021

Infrared thermal imaging technology is now more and more widely used in many different areas around the world, such as the security monitoring, industrial detection, the autonomous vehicle auxiliary market, iron industry and so on. Infrared thermal imaging camera is equipped with...

Vendredi 08 janvier 2021

KES manufactures a variety of cast aluminium furniture such as cast aluminium garden furniture sets, cast aluminum lawn furniture, solid cast aluminum outdoor furniture, cast classic outdoor furniture, cast metal garden furniture, and cast outdoor furniture. Aluminum is a kind of...

Vendredi 08 janvier 2021

The characteristics of the aluminum die cast heat sink are less time, fast heat supply, and high efficiency. Lightweight and smart, easy to process is a major feature. The weight of an aluminum heatsink of the same specification is 1/3 of that of a steel heatsink. The aluminum heatsink...

Mardi 29 décembre 2020

Quantité : more than - Prix : 3000-6500 euro per M

Description of Pickled Coils Pickling is a production procedure to remove the oxide scale on the cold rolled steel coil surface during steelmaking. The"pickle tank" that the cold rolled steel coil sink and runs in a diluted solution of inorganic acid, it usually chose to use the hydrochloric...

Mardi 29 décembre 2020

Quantité : more than - Prix : 3000-6500 euro per M

How to Identify Iron Ore The iron ore are rocks and minerals from which metallic iron can be economically extracted. The ores are usually rich in iron oxides and vary in color from dark grey, bright yellow, or deep purple to rusty red. It is an important raw material for iron and...

Vendredi 04 décembre 2020

Prix : 100USD

Brief introduction of rubber magnets(magnetic rubber): Rubber magnets sometimes called magnetic rubber. Magnetic rubber itself has no magnetism , the magnetism comes from filled magnetic powder. So the magnetic powder is obligate material for produce magnetic rubber. Magnetic additive...

Jeudi 03 décembre 2020

Quantité : More than - Prix : 0.5-10USD

CNC prototyping is the fastest way that allows designers to rapidly verify designs and iterate ideas without tooling costs, Prototype machining is ideal to make rapid prototyping cnc machining from plastic or metal, they are able to achieve tighter tolerance with better surface...

Mercredi 04 novembre 2020

Quantité : 2000TON

High performance thermal grease GOLOHO Silicone Grease are adhesive thermal compounds like silicone materials, heavily filled with heat-conductive metal oxides. This combination promotes high thermal conductivity, low bleed and high-temperature stability. The compounds are designed...

Jeudi 15 octobre 2020

Quantité : 10000ton/y - Prix : $2.2/kg~$6/kg

Compared to rare earth magnetic materials, bonded ferrite magnets have obvious cost advantage due to the use of cheap strontium oxide, barium oxide and iron oxide as raw materials. In addition, ferrite has high stability and curie temperature, which makes it the most widely used permanent...

Dimanche 11 octobre 2020

Quantité : ≥2000 tons - Prix : $1000-$2000

Pure Calcium Cored Wire Utilisation Solid pure calcium cored wire use thicker steel strip to encase the calcium wire. With the advantages of uniform diameter, high tensile strength, good toughness, not easy to break. Advantages Of Solid Pure Calcium Cored Wire 1. Reduce the cost...

Jeudi 08 octobre 2020

Quantité : 100 - Prix : 50usd

Mounted slits and pinhole specification: - Slit Widths Available: 5 – 1000 µm - Slit Length: 3 mm or customized - Slit Material: 304 Stainless Steel, or 304 Stainless Steel with Black Oxide Finish - Housing: Black-Anodized Aluminum with Ø1″ (25.4mm) Outer Diameter x 0.10″ (2.5mm)Thick...

Jeudi 01 octobre 2020

Description of Tinplate Coil Tinplate is made from the cold-rolled sheet which is electroplated with tin. Tin coatings'function is corrosion resistance to steel substrates and preservation of fast and canned foods. Also, the surface of tinplate is suitable for printing and screen printing...

Jeudi 01 octobre 2020

Description and Production procedure of Steel Pellet Pellets are small balls of iron ore used in steel production. They are one of the important sources of iron in the manufacture of steel. Pellet production is the basis of the steel production process. Steel pellets are made from...

Jeudi 01 octobre 2020

Description of Steel Raw Material Steel is one kind of alloy, made of iron and carbon. The carbon content is usually less than two percent and for manganese, silicon, phosphorus, sulfur, and oxygen，the the content is even smaller. Steel is the most important engineering and building...

Mardi 22 septembre 2020

Quantité : 30pcs

After 20 years of development, the application of laparoscopy in surgery has gradually evolved from the initial simple cholecystectomy to today's general surgery involving gastrointestinal, hepatobiliary, pancreatic, thyroid, breast, and abdominal wall surgery. surgery. At present...

Mardi 22 septembre 2020

HDG pipe, which is also called Hot Dip Galvanized Pipe or Galvanised Metal Pipe. Hot-dip galvanizing (HDG) is the reaction of a molten metal with an iron matrix to produce an alloy layer, thereby combining the substrate and the plating. Hot-dip galvanizing is to pickle the steel pipe first...

Jeudi 17 septembre 2020

Quantité : 100 Kilogr - Prix : $12.5/KG

oxide ceramic high purity Al2O3 used for pump seats equivalent to Metco 105SFP - - Specification Al2O3 SiO2 TiO2 CaO NaO2 Fe2O3 MgO 98.42% 0.80% 0.01% 0.12% 0.31% 0.04% 0.30% Product name: Al2O3 POWDER Standard: DIN GB ISO JIS BA ANSI Grade: Metco 105SFP Package...

Samedi 12 septembre 2020

We offer different kinds of Hollow & Bushing Insulator for Substation, such as Circuit Breaker (CB), GIS, Post Insulator, Disconnector, Potential Transformer (PT), Surge Arrester, etc. Contact us get more details about Hollow & Bushing Insulator, such as TDS, Application Method, OEM etc...