TEMPERATURE LIQUID SILICONE RUBBER FOR - 31828 Annonces

Mardi 08 août 2023

Quantité : 1K - Prix : 1-1000000usd

Liquid silicone rubber (LSR) molding is a form of injection molding. The liquid silicone rubber is first injected into the mold, then the liquid is thermally cured, cooled and removed from the mold. Compression molding uses uncured rubber that has been preformed into a controlled shape...

Mardi 08 août 2023

On the mounted flap wheel for drill, the flap made of coated abrasive is arranged radially around the tool axis in a fan-shaped structure. Their flexibility enables them to fully adapt to the contour of the workpiece. Abrasive particles are embedded in a strong and flexible cloth...

Mardi 08 août 2023

The flexibility of 8 inch flap wheel enables them to fully adapt to the contour of the workpiece. Abrasive particles are embedded in a strong and flexible cloth backing material through a resin adhesive. Flap Wheel 3/8inch Specification: Diameter: 3/8 inch=10mm Max. RPM: 25000 RPM Raw Materials...

Mardi 08 août 2023

On the mounted abrasive flap wheel, the flap made of coated abrasive is arranged radially around the tool axis in a fan-shaped structure. Their flexibility enables them to fully adapt to the contour of the workpiece. Abrasive particles are embedded in a strong and flexible cloth backing...

Mardi 08 août 2023

On the Mounted Small Flap Wheel, the flap made of coated abrasive is arranged radially around the tool axis in a fan-shaped structure. Their flexibility enables them to fully adapt to the contour of the workpiece. Abrasive particles are embedded in a strong and flexible cloth backing...

Mardi 08 août 2023

On the Mounted Emery Flap Wheel, the flap made of coated abrasive is arranged radially around the tool axis in a fan-shaped structure. Their flexibility enables them to fully adapt to the contour of the workpiece. Abrasive particles are embedded in a strong and flexible cloth backing...

Mardi 08 août 2023

On the Mounted Flap Wheel, the flap made of coated abrasive is arranged radially around the tool axis in a fan-shaped structure. Their flexibility enables them to fully adapt to the contour of the workpiece. Abrasive particles are embedded in a strong and flexible cloth backing material...

Mardi 08 août 2023

On the mounted aluminium oxide flap wheel, the flap made of coated abrasive is arranged radially around the tool axis in a fan-shaped structure. Their flexibility enables them to fully adapt to the contour of the workpiece. Abrasive particles are embedded in a strong and flexible...

Mardi 08 août 2023

Quantité : 1K - Prix : 1-1000000usd

Commonly used materials for plastic parts processing: ABS, POM, PC, PEEK, Bakelite, Nylon, etc. Specifically can be used for 3D printing, rapid prototyping, vacuum re-molding and other processes. The processing application environment varies, and the processing method used varies...

Mardi 08 août 2023

This single-display module is suitable for use in Automobile products.EX07015-A01 is a 7.0 inch, TTL TN TFT LCD module . The module dimension is 165.00(W)×100.00(H); active area 154.08(W)×85.92(H) mm (7.0"diagonal). Its resolution is 800x480 pixels (width 800pixels x height 480 pixels) ...

Mardi 08 août 2023

The EX09002-A01 is a color active matrix (TFT) liquid crystal display (LCD) that uses amorphous silicon TFT as a switching device. It is composed of a TFT LCD panel, a timing controller, voltage reference, common voltage, column driver, and row driver circuit. This TFT LCD has a 9...

Mardi 08 août 2023

A lcd touch display is a combination of a TFT LCD display and a touch technology overlay, It can be used as a display as well as a keyboard, which enables the users to operate without a mouse or touchpad. And because of its convenience and long lifespan compared with traditional buttons...

Mardi 08 août 2023

EX03505-A01 is a 3.5 tft lcd display module with resolution of 320x480 pixels. The brightness is 220 cd/m2 and the contrast ratio is 400: 1 (typical value). LCM voltage ranges from 3 V~5V. Operating temperature covers from -20℃~+70℃, storage temperature range is from -30~+80℃. UART...

Mardi 08 août 2023

The TFT display is a kind LCD, one of the best and most high- tech LCD , which combined both the display effect of CRT and the response speed of a LCD, high quality tft lcd display module has been widely use in mobile, laptops, on wall LCD monitors etc. High quality tft lcd display's...

Mardi 08 août 2023

Technical Principle Of Micro ReactorComposition of D-AMERT high flux microreactor：Transfer metering unit —Temperature control unit—micro modular reactor—Online analysis unit Characteristics of Micro Reactor 1 Rapid temperature response: High-efficiency heat transfer system and extremely...

Mardi 08 août 2023

Ethanol Method to Prepare MMA, Mature Technology was Optimized Again. Methyl Methacrylate (MMA) Technology Introduction Shanghai DODGEN Company has long been committed to the development of new technology of bio-based materials, using ethanol as raw material to synthesize methyl methacrylate（MMA）...

Mardi 08 août 2023

Accurately control the temperature and integrate a number of technologies for efficient purification. Characteristics of Melt Crystallizer 1 High product purity: The product purity can be above 99.99% chromatographically pure according to customer requirements. 2 Low operating temperature...

Mardi 08 août 2023

Accurately control the temperature and integrate a number of technologies for efficient purification. Technical Principle Of Melt Crystallization Characteristics of Melt Crystallization Technology 1 High product purity: The product purity can be above 99.99% chromatographically pure...

Mardi 08 août 2023

Process optimization and improvement in reaction, a new generation of hydrocyanic acid synthesis technology in the world. Characteristics of hydrogen cyanide synthesis Process Technology 1 A new generation of reaction equipment with fast gas flow rate and high mass transfer efficiency...

Mardi 08 août 2023

Complete liquid nitrogen separator product chain has been considered to customize separation scheme for customers. Technical principle Of gas liquid separator china Characteristics of cryogenic phase separator for liquid nitrogen 1 99%removal efficiency can be achieved for droplets above 0...

Mardi 08 août 2023

Effectively reduce the tower kettle temperature and improve product quality and yield. Technical Principle of Falling-film Evaporator Characteristics of Falling-film Evaporator 1 Design conditions: We use the most safe and stable falling film reboiler model in present day, and the...

Mardi 08 août 2023

Extraction process definition Advanced liquid-liquid extraction tech, solving separation problems and providing economical solutions Technical Principle of Extraction Tower Characteristics of Extraction Tower 1 DODGEN high-efficiency rotor chemical extractor tower has been designed thoughtfully...

Mardi 08 août 2023

BioHub® single-use storage bottles are suitable for sensitive liquids, buffers and media. The product is available in autoclave and gamma irradiated versions with different caps, eliminating the risk of batch-to-batch or product-to-product cross-contamination. In addition, a variety...

Mardi 08 août 2023

In the single-use fluid technology, the sterile disconnection route of the tubing can be realized by multiple means. In which, BioHub® SC is a compact device that is intuitive, reliable, and easy to use and that integrates the sterile disconnection and sealing functions all in one...

Mardi 08 août 2023

BioHub® Sealer can be used to disconnect disposable components used in biopharmaceutical manufacturing processes, maintaining product sterility even in non-sterile environments. Please be advised that this product is only available for sale and after-sales support in certain regions...

Mardi 08 août 2023

The small size design is equipped with a unique paddle to meet the mixing of small volume of material and liquid. Please be advised that this product is only available for sale and after-sales support in certain regions. For further details, kindly consult with your local sales representative...

Mardi 08 août 2023

BioHub single use mixing bag are designed for common mixing applications in biotechnology and pharmaceuticals to facilitate lab research and process development. It can meet various liquid-liquid mixing and solid-liquid mixing needs, suitable for medium preparation, buffer preparation...

Mardi 08 août 2023

The BioHub® DS Modular Desktop Mixing System is a dedicated stirring device designed for small-volume liquid handling and desktop applications. This equipment, equipped with a control system, is compatible with various commonly used small-volume specifications, including 2L, 5L, 10L...

Mardi 08 août 2023

Single-use solutions are increasingly being used in bioprocessing production. For single-use bioprocessing, reliable connection and disconnection operations are critical to maintaining closed systems, and this technology also determines process integrity and operator safety. Advanced...

Mardi 08 août 2023

BioHub® 2D single-use bioprocessing bags are designed for bioprocess needs. It is suitable for liquid mixing, storage, transport, and cryopreservation. Features of BioHub 2D Disposable Bioprocess Bags 100% integrity test of finished products after assembly; Capacity: 110%; Liquid recovery rate...