MECHANICAL - 7512 Annonces

Samedi 11 novembre 2017

Quantité : 1000 - Prix : 30,00 €

Vitrified Diamond Grinding Wheel for Carbide Tools Carbide tools has excellent characteristics of high hardness, wear resistance, high strength and corrosion resistance, especially high hardness and wear resistance. With the development of science and technology, carbide is the best...

Samedi 11 novembre 2017

Quantité : 1 set - Prix : 1 usd per set

Digital Elmendorf Tearing Tester Standards: ASTM D1424/D689, NEXT 17, M&S P29, BE EN ISO 13937/4674, BS 4468, DIN EN 21974, GB/T 3917.1, ISO 1974 Applications: Digital Elmendorf Tearing Tester is used for determining the tear strength of fabrics, non-woven, paper, cardboard...

Mercredi 08 novembre 2017

Quantité : 4500 tons - Prix : 4 500,00 €

The description of 8011 aluminum foil: 8011 aluminum foil is a common aluminum foil, a wide range of applications. Definition: a thickness of less than 0.20mm, the cross section is rectangular and uniform rolled aluminum products. Because the aluminum soft texture, good ductility...

Mercredi 08 novembre 2017

Quantité : 4500 tons - Prix : 2 500,00 €

3003 aluminum coil is commonly product in the 3000 series of Al-Mn alloy. Because of the addition of manganese in the alloy, it has excellent rust resistance. Therefore, the 3003 aluminum coil is the most widely called antirust aluminum. As one of the representative products of Mingtai Aluminum...

Dimanche 05 novembre 2017

1. Casting fuselage, stable performance. easy operation and maintenance, helical gear transmission, smooth operation and low impact.2. C frame punch press provides maximum rigidity and minimum deflection for accurate parts and long tool life.3. Rigid key switch, simple structure.4...

Dimanche 05 novembre 2017

The hydraulic shearing machine is a machine use a blade against to another blade to act vertical movement. It is use the movable upper blade and the fixed blade, which through the reasonable blade gap to apply shear force to the metal sheet of various thicknesses, so that the plates...

Dimanche 05 novembre 2017

Hydraulic Press Brake machine belong to the universal machine tools, mainly used for metal sheet and plate bending, by both sides is two pieces of C type steel plate and work table with horizontal beam assembly into a three-dimensional structure. The slider suspension on the oil cylinder...

Dimanche 05 novembre 2017

1. The design of this servo press brake compliance with EU international standards. The fuselage eliminates internal stress by annealing and ensures higher strength and precision. All these MB8 series steel sheet bending machines are designed by SOLID WORKS 3D programming system and...

Dimanche 05 novembre 2017

- MB8 CNC Automatic 3+1 Axis Hydraulic Sheet Metal Press Brake Bending Machine With DA56S System Introduction - 1. The design meets EU international streamlined design. The fuselage eliminates internal stress by annealing and ensures higher precision and strength. All machines are...

Dimanche 05 novembre 2017

- MB8 CNC 8+1 Axis Hydraulic Press Brake Bending Machine for Sheet Metal With DA66T System Introduction - 1. The machines Through the CE certification.The fuselage eliminates internal stress by annealing in tempering furnace and ensures higher precision and strength.All products...

Samedi 04 novembre 2017

CVD magnesium fluoride (MgF2-CVD) has good mechanical properties, chemical stability, impact resistance, great anti thermal fluctuations and radiation. While it has excellent transmission from 0.11 to 9 um, suitable for optical lenses, wedge, and window manufacturing. MgF2 is also...

Samedi 04 novembre 2017

The small object tester simulates the throat of children under 3 years old to test whether small objects can pass through their throats. It's a toy safety tester, which is made of stainless steel with the passivation treatment surface. And it's used to assess the risk of suffocationtoys...

Samedi 04 novembre 2017

The instrument is used to test the pilling conditions of wool fabric, chemical fiber cotton, and blended, knitted, woven fabric to identify product quality and process effect. When testing, the fabric is rubbed against nylon brush and abrasive, or rubbed against abrasive only in the...

Samedi 04 novembre 2017

Single-arm material testing machine is widely used in various types of metal, metal, rubber and plastic, footwear, leather, clothing, textiles, insulators, wires, cables, terminals ... and other materials to test its tensile, Peeling, compression, bending, anti-shear, three-point bending ...

Vendredi 03 novembre 2017

Quantité : 1PCS - Prix : 46.69USD

- Low PIM -150dBc 698-2700MHz DIN type IP65 waterproof 20-40dB Directional Coupler - Product Show Specifications Electrical Specifications Frequency 698-2700MHz Model LCTC0727-20PDO LCTC0727-30PDO LCTC0727-40PDO Specifications 20dB 30dB 40dB Attenuation ±1.2 ±1.5 ...

Vendredi 03 novembre 2017

Quantité : 1PCS - Prix : 42.69USD

- High Quality Low PIM -150dBc 698-2700MHz DIN type IP65 waterproof 5-15dB Directional Coupler - Product Show Specifications Electrical Specifications Frequency 698-2700MHz Model LCTC0727-05PDO LCTC0727-06PDO LCTC0727-07PDO LCTC0727-10PDO LCTC0727-15PDO Specifications...

Vendredi 03 novembre 2017

Quantité : 1PCS - Prix : 19,99 €

- Low PIM -155dBc 698-2700MHz IP65 waterproof N type rf power splitter divider 2 3 4 Way power Splitter - Product Overviews Specifications Electrical Specifications Frequency 698-2700MHz Type 2 way splitter 3 way splitter 4 way splitter Model SH-02D-FN.VXX-LSB SH-03D-FN...

Mercredi 01 novembre 2017

Technological Craft of DEF Solution Production Equipment 1 Preface of DEF Solution Production Equipment Shandong Newblue provides one set Adblue production system. 1.1 Raw water quality: use tap water supplied by customers. 1.2 Output quality：meet customer's requirement, 2 stage...

Samedi 21 octobre 2017

Quantité : 50000000.0 - Prix : USD 0.36 per watt

Characteristics and performance > Use of only certified materials at highest quality standards > Process of cell and module production is fully automated with 100% quality control and product traceability > Heavy load mechanical resistance: TuV certified (5400Pa tested against...)

Mercredi 18 octobre 2017

Brief Introduction. Inverted bucket type steam trap,as a mechanical steam trap, has outstanding performance and can be used low ,medium and high pressure. Working Principle The design makes use of the working principle of difference in density of steam and condensate. The compound...

Mercredi 18 octobre 2017

Advantages 1, To achieve greater CV value and wider adjustable ratio S shaped structure body is generated from the fluid analysis in a unique, can be suppressed by flow path shape complex and eddy current as well as flow path suddenly expand caused by complex and irregular flow phenomenon...

Mercredi 18 octobre 2017

This product is composed of the pneumatic multi-springs, pneumatic actuator and the low flow resistance sleeve. This valve uses the balanced valve core, the unbalanced force is small, the permission pressure differential is big, and operation is steady. Compared with the ordinary...

Mardi 17 octobre 2017

The bending performance of the fabric is an important physical parameter that we study the properties of fabric, such as crisp, drape, and softness. The instrument uses bending length (also known as overhanging stiffness) and bending stiffness (also called bending stiffness) Mechanical...

Mardi 17 octobre 2017

Introdution: Elmendorf Tearing Tester takes the Elmendorf method and is used to determinate tearing resistance property of films, sheets, flexible PVC, PVDC, waterproof films, woven materials, polypropylene, polyester, paper, cardboard, textile and non-woven etc. The weight is configurable...

Samedi 14 octobre 2017

Quantité : Min order - Prix : 1-5USD/pc

Keywords: ASTM A105N Flange,ASME B16.5 WN Flange Name: WN Flange. Class: CL600. Schedule: SCH 80. Material: ASTM A105N. Ends: RF. Standard: ASME B16.5. Size: 12". ASTM A105N Flange Chemical Composition: Grade C Mn P S Si Cu Ni Cr Mo V A105 - 0.60 - - 0.10 - - - 0...

Vendredi 13 octobre 2017

Quantité : 8 Tons - Prix : US $2,600 - 4,000 /

FOB Price: US $2,600 - 4,000 / Metric Ton Min.Order Quantity: 8 Metric Ton/Metric Tons Supply Ability: 2000 Metric Ton/Metric Tons per Month 5 Bar Patten Aluminium Checker Plate Port: Tianjin/Qingdao Port Payment Terms: L/C,T/T Quick Details Grade: 1000 Series Temper...

Jeudi 12 octobre 2017

OPTOSTAR OP-V105 Boîte de Joint Optique Fibre Optique Boîte de Joint Extérieure Boîte de Joint Optique Fibre Optique Aperçu - L'OPTOSTAR OP-V105 dispose de 6 ports ronds en fibre optique et le diamètre du câble est compris entre -7 et Ф18. Il est largement appliqué à l'épissage et...

Jeudi 12 octobre 2017

OPTOSTAR OP-V105 Boîte de Joint Optique Fibre Optique Boîte de Joint Extérieure Boîte de Joint Optique Fibre Optique Aperçu - L'OPTOSTAR OP-V105 dispose de 6 ports ronds en fibre optique et le diamètre du câble est compris entre -7 et Ф18. Il est largement appliqué à l'épissage et...

Jeudi 12 octobre 2017

Adaptateur optique Adaptateur hybride OPTOSTAR Adaptateur FC-SC Adaptateur SC / FC caractéristiques du produit - Faible perte d'insertion, perte de retour élevée - Bonne compatibilité - Haute précision des dimensions mécaniques - Haute fiabilité et stabilité - Types de connecteurs...

Jeudi 12 octobre 2017

Adaptateur optique Adaptateur hybride OPTOSTAR Adaptateur FC-SC Adaptateur SC / FC caractéristiques du produit - Faible perte d'insertion, perte de retour élevée - Bonne compatibilité - Haute précision des dimensions mécaniques - Haute fiabilité et stabilité - Types de connecteurs...