ENDS - 9040 Annonces

Mercredi 05 juin 2024

RFJW03 Water Jet Looms RFJW03 series water jet loom is suitable for weaving light and medium-thickness fabrics. Drawing on Rifa's experience in development of other water jet looms, the design is optimized, the weaving speed and quality of the loom are improved. The loom has varied...

Mercredi 05 juin 2024

Block ferrite magnets are a type of permanent magnet made from a mixture of iron oxide and barium or strontium carbonate. These magnets are also known as ceramic magnets due to their brittle, ceramic-like texture. Ferrite Magnets, also known as ceramic magnets, are made of a composite...

Mardi 04 juin 2024

HIFU machine for body and face professional is a non-invasive cosmetic procedure that utilizes ultrasound technology to lift, tighten, and rejuvenate the skin. It is a safe and effective treatment for non-surgical skin tightening, targeting areas such as the face, neck, and décolletage...

Mardi 04 juin 2024

Quantité : 50000 pcs - Prix : $20-$50

HYDRAULIC CHUCK A hydraulic chuck is a specialized tool holder used in precision machining operations such as hydraulic milling chuck and hydraulic collet chuck. Hydraulic chuck clamps and securely holds cutting tools with high accuracy and stability, reducing vibration and improving...

Mardi 04 juin 2024

Quantité : 50000 pcs - Prix : $20-$50

HSK･T Boring Bar Holders HSK-T boring tool holders are with outlet holes on the end face, with wide range diameters from 6mm to 40mm. SPECIFICATION OF HSK･T BORING BAR HOLDERS Size d1 d2 l1 l2 HSK40T-E2-06-055 6 34 55 35 HSK40T-E2-08-055 8 34 55 35 HSK40T-E2-10-055...

Mardi 04 juin 2024

Hexamethyldisiloxane(MM)SiSiB® PC9200, also called as HMDSO or HMDO, is a colorless clear liquid. Technical Data CAS No. 107 46 0 EINECS No. 203-492-7 Formula C6H18OSi2 Molecular Weight 162.38 Boiling Point 99°C [760mmHg] Flash Point -1°C Appearance Clear liquid APHA 10 Density 25/25°C 0...

Mardi 04 juin 2024

The excavator hydraulic pump seal kit produced by Elephant Fluid Power has a wide variety and complete models, where you can achieve a one-stop shopping experience. Our product quality and testing standards meet the requirements of Rexroth, Danfoss, Komatsu, Caterpillar, etc., compatible...

Mardi 04 juin 2024

Quantité : 50000 pcs - Prix : $20-$50

CNC TOOL HOLDERS CNC turning tool holder types are widely used in CNC milling machining, machines as machining centers and milling machines. Based on different international standards, BRIGHT-TOOLS has gradually derived our own standards. BRIGHT-TOOLS is committed to making the CNC...

Mardi 04 juin 2024

Top hammer shank adaptors, the role of which in rock drilling is to directly bear the impact energy and torque of the rock drill, and is used to transfer the energy from drill rig to drill rod. One end of the shank adaptor is connected to drill rig, and another end is connected to drill rod...

Mardi 04 juin 2024

MF rod, also known as speed drill rod, has a male thread at one end and a female thread at the other end. It can directly connect to the shank adapter without the aid of a coupling sleeve, which eliminates the defect that the equal diameter thread connection is prone to vibration...

Mardi 04 juin 2024

Hardwood Flooring End Cap Specification Product Name End Cap for Vinyl Plank Flooring Specification 2400*35*8 mm Package Quantity 25 pcs/carton Installing Way glue/snap/staple Application corner edge, floor edge trim If you want to know more about hardwood floor end cap molding ...

Mardi 04 juin 2024

T5 LED Tube Light T5 LED tube light is an led tube with a 5/8-inch diameter, which is mainly used in lighting scenes such as factories, warehouses, supermarkets, and offices. Anern LED series T5 tubes adopt the style with a support bracket. As there is no need to purchase separately...

Mardi 04 juin 2024

Quantité : 10

KRD100 series incline impact tester is a testing machine that evaluates the ability of loads to withstand inclined impacts or crushing forces due to the force of gravity. These impacts and forces can affect the stability and safety of the packaging products. KRD100 series inclined...

Mardi 04 juin 2024

Quantité : 5000SETS - Prix : 80000-2000000

Tappet full automatic eddy current testing system is a full automatic crack hardness sorter that integrates light, electricity and machinery. The whole system includes a main control system, charging system and mechanical transmission system. The workpiece is sent to the area to be...

Mardi 04 juin 2024

Quantité : 5000SETS - Prix : 80000-2000000

LGET-553 Aluminum Tube Eddy Current Flaw Detector Brief Introduction The aluminum tube is a type of non-ferrous metal which may have one or more closed holes which are thick and uniform in cross-section. It is widely used in electrical, agricultural, electromechanical and other industries...

Mardi 04 juin 2024

Quantité : 5000SETS - Prix : 80000-2000000

GSET-551 Steel Wire Eddy Current Flaw Detector GSET-551 Steel Wire Eddy Current Flaw Detector Brief Introduction Using the eddy current signal processing method and high-performance DSP algorithm, the NDT wire rope tester detection ability of micro-crack is as high as 0.05mm deep crack...

Samedi 01 juin 2024

This kind of steel fiber is made of high-speed wire, when you add it to concrete, which can improve the toughness, bending and tensile strength, shear strength, shock resistance, cracking resistance, and permeability of concrete. Thus, steel fiber concrete is essentially different...

Samedi 01 juin 2024

Hooked end steel fibres are made of high-quality cold drawn steel line, in order to make sure that it has high tensile strength and animal tolerance. And the steel fiber in bulk ensures the mixing fast and convenient, and the distribution homogeneous. During pulling from the cement...

Samedi 01 juin 2024

Glued hooked end steel fibre is made of high quality cold-drawn wire. The glued steel fiber in bulked could make sure it has good dispersibility in concrete. Compared with general concrete, steel fibre concrete has a great improvement in tensile strength, flextural strength, abrasion resistance...

Samedi 01 juin 2024

There are many types of steel fibre used in concrete. The steel fiber for concrete reinforcement is a new kind of metal material, in order to enhance concrete with metal fiber and shotcrete in its hardened state. Tengzhou SDS steel fiber make concrete have extremely high flexural...

Samedi 01 juin 2024

There are many types of steel fibres used in concrete . The steel fiber for concrete reinforcement is a new kind of metal material, in order to enhance concrete with metal fiber and shotcrete in its hardened state. Tengzhou SDS steel fibers make concrete have extremely high flexural...

Samedi 01 juin 2024

LDC-350B Automatic Label Die Cutting Machine This die cutting machine is ideal for electronic protective film. It has high precision and high sensitivity. Application This type of machine is the most ideal machine for die cutting self-adhesive trademark, terylene film trademark, and...

Samedi 01 juin 2024

LY-RS320 Semi Rotary Die Cutting Machine This label press machine is the most ideal machine for printing material, adhesive label, adhesive film slitting and die cutting. Application This type machine is the most ideal machine for printing material, adhesive label, adhesive film slitting...

Samedi 01 juin 2024

In the 1980s, flexographic printing technology developed rapidly. The performance of flexographic printing machines, the processing precision of the ink roller and the resolution of the plate are improved obviously. The quality of the china flexo printing machine has reached or close...

Samedi 01 juin 2024

Label Printing Machine It is suitable for printing paper, paper board, paper cup, high-grade self-adhesive label and so on. Application It is suitable for printing high-grade self-adhesive label, release Liner Label, food label, bottle label, and etc. Application industry: On the...

Samedi 01 juin 2024

Shell Moulding Description BMC/SMC shell moulding is mainly injection molded. The application of SMC in anti-explosion electric appliances change the dominance of steel and aluminium in anti-explosion solution. Compared with steel and aluminium materials, SMC has excellent performance...

Samedi 01 juin 2024

Mainly for injection molding, the design of the runner and the parting surface should be as small as possible, and the crossover, exit, protector and control board of the motor should not be damaged. Because BMC materials cannot be decomposed, we are the first in China without material...

Samedi 01 juin 2024

Household appliance including BMC appliances and SMC appliances accessories have strict requirements for durability. These accessories may be used for 10 years or more, during which they may be exposed to heat, load, impact and corrosion. All kinds of household appliance accessories...

Samedi 01 juin 2024

Male luer lock adapters provide a convenient way to connect soft tubing ID 1/16" to 1/4" with products that feature a female luer slip or luer lock end without the need for barbs or nuts, the material of medical grade PP ensure the high purity and suitable for non-corrosive liquid...

Samedi 01 juin 2024

Prix : 0.05-20

PIPE COUPLING/PIPE SOCKET Sanvo can provide various pipe couplings according to the needs of every valuable hardware customers. SANVO & Fittings is one of the trustworthy and reliable pipe coupling manufacturers who specializes in producing the highest quality pipe couplings with...