EFFICIENCY - 11727 Annonces

Mardi 23 mai 2023

ADV400 CNC EDM Machine With Automatic Working Tank ADV series CNC die sinker EDM machine is designed for automation application in EDM machining field, the lifting of the working table is automatic, we utilize a robot to load and unload electrodes and workpieces, it is fully automatic...

Mardi 23 mai 2023

A45 CNC spark erosion machine has three-axis simultaneous control and 5th generation electrical discharging control system, best surface finish Ra≤0.08μm, Min. electrode wear ≤0.05%, standard equipped with 50A controller and Max machining efficiency ≥500mm3/min. Excellent performance...

Mardi 23 mai 2023

A1880 twin heads CNC spark erosion machine has two separated controllers and two separated machine heads, three axis simultaneous control of each head and DMNC 5th generation electrical discharging machining control system, best surface finish Ra≤0.2μm, Min. electrode wear ≤0.1%,...

Mardi 23 mai 2023

Quantité : 100 - Prix : USD100-100000

The integrated WDM System offers 1U 48X10G→480G System and 1U 12X100G→1.2T System which supports single-channel access rate up to 10 Gbit/s and adaptive access to all types of services at rates of 10 Gbit/s or lower (like FE/GE/10GE LAN, 10GE WAN, STM-1~64, etc.) and 40GE, 100GE,...

Mardi 23 mai 2023

Prix : 200-2000

The structure of the mid motor is much more complicated than hub motor. Mid motor also requires clutches, drive shafts, and other components. The power is output to the rear wheels. It is directly connected to the cranks and gears, which can get more power. Features of ShengyiCMT03...

Samedi 20 mai 2023

Quantité : No limited - Prix : 50-150000 USD

CDD-B SERIES WITH FIXED FORKS Compact design with strong European steel construction. Simple and convenient lifting operating system. Light and easy manual steering system, equipped with a parking brake. Smooth control of precise lifting and lowering. Special design are available...

Samedi 20 mai 2023

LED beacon lights are used for outdoor vehicle warnings. It is an ideal safety device. Car beacon lights and emergency beacon lights are the most common applications. It can be equipped in trailers and towers, cars, roads, ships, etc. Magnetic, cone, post base are available for your selection...

Samedi 20 mai 2023

Quantité : 100 sets/ - Prix : USD 25000- 300000

Aluminum is a silvery-white, soft, non-magnetic, and ductile metal in the boron group. In recent years, aluminum tubes have been widely used in metallurgy, machinery, petrochemical, electronics, atomic energy, medical, agriculture, aerospace, and defense industries. Wuhan Golden Laser...

Samedi 20 mai 2023

Quantité : 100 sets/ - Prix : USD 25000- 300000

With the popularization of the concept of "Industry 4.0", GoldenLaser's smart laser cutting machine P2060A meets the standard of full automation. By integrating information, order placement, feeding, pipe identification, length measurement, automatic calling program cutting, blanking...

Samedi 20 mai 2023

Quantité : 100 sets/ - Prix : USD 25000- 300000

P1260A - Your Best Laser Cutting Solutions For Small Metal Cutting Small tube laser cutting machine P1260A is born for small diameter tube laser cutting within 10- 120mm (0.4"- 4.72"). Among the many industries that apply laser tube cutting technology, the largest number of customers...

Samedi 20 mai 2023

Quantité : 100 sets/ - Prix : USD 25000- 300000

With the rapid development of laser technology, round tube laser cutting machine has become the preferred equipment for the pipe processing industry. Without mechanical extrusion, running drill, and other problems, the round tube processing machine has an excellent processing effect-high...

Samedi 20 mai 2023

Quantité : 100 sets/ - Prix : USD 25000- 300000

Large tube laser cutting uses a focused high-power-density laser beam to irradiate the workpiece, so that the irradiated material quickly melts, vaporizes, ablates, or reaches the ignition point while blowing away the molten material. And with the help of a high-speed airflow coaxial to the beam...

Vendredi 19 mai 2023

Prix : 1000USD-40000USD

The X120-D UV Spot Repair System is mainly used for the repair of point defects in drainage . According to different pipe diameters, the corresponding airbags are selected to accurately repair the damaged points. It is mainly composed of a main control system and an airbag. Its main...

Vendredi 19 mai 2023

uasun HJT solar modules have high power, high efficiency and high reliability. The annual power output can reach 6% to 12% higher than PERC bifacial solar panel module. The pv bifacial module has an obvious advantage of power generation in high temperature and weak light environment...

Vendredi 19 mai 2023

What Is HJT Solar Cell? Huasun hjt solar cell technology was made of ultra-thin N-type silicon wafer which employs SMBB and μc-Si technology. The maximum hjt solar cell efficiency has reached 25.61% in mass prodution, and there is a clear path of efficiency improvement with huge potential...

Vendredi 19 mai 2023

Main Features of Himalaya M6 Series N-type 166mm HJT Solar Cell Power Output Range: 380W to 500W Module Efficiency Range: 20.86% to 23% 15-year Product Warranty 30-year Performance Warranty Power Output: 380W-400W Module Efficiency: 20.86-21.96% Module Dimension: 1755*1038*30mm...

Vendredi 19 mai 2023

Main Features of Huasun Energy Himalaya G12 Series N-type 210mm HJT Solar Cell Power Output Range: 615W to 720W Module Efficiency Range: 21.89% to 23.19% 15-year Product Warranty 30-year Performance Warranty Power Output: 615W-635W Module Efficiency: 21.73-22.44% Module Dimension...

Vendredi 19 mai 2023

Introduction of HJT Heterojunction technology (HJT) is a n type bifacial solar cell technology, by leveraging N-type monocrystalline silicon as a substratum and depositing silicon-based thin films with different characteristics and transparent conductive films on the front and rear...

Vendredi 19 mai 2023

Help clients achieve carbon neutrality, maximize the return on investment. Ningguo 15MW C&I Rooftop Location: Anhui, China Capacity: 15MW Power generation: 16,160,000kWh/year Coal saving: 6,464tons/year CO2 emission reduction: 16,111tons/year Xuancheng 4.5MW C&I Rooftop Location...

Vendredi 19 mai 2023

F500 single-acting drilling rig small mud pump equipment has two surfaces which can bear high strength to ensure high efficiency of the operation. SAIGAO GROUP rigorously chooses best quality steel in accordance with API, 7K and 8C to make sure it has a long service life. Those new...

Vendredi 19 mai 2023

The pump has features of advanced structure, small volume, reliable operation, easy maintenance. The cylinder is made of alloy steel forgings, and the three cylinders of each pump are interchangeable. The suction valve and discharge valve of F1300 and F1600 are interchangeable. In...

Vendredi 19 mai 2023

The pump has features of advanced structure, small volume, reliable operation, easy maintenance The cylinder is made of alloy steel forgings, and the three cylinders of each pump are interchangeable The suction valve and discharge valve of F1300 and F1600 are interchangeable In order...

Vendredi 19 mai 2023

Prix : USD1000

Catalog of Hydroskimming Oil Refinery Mode Capacity Power Fabrication Period Area Skid Number Weight (BPD) (Kw/d) (month) (Acre) (Ton) MR150 15000 500 7 4 12 550 MR200 20000 650 7 5 14 700 MR250 25000 800 7 6 16 900 Product Yield of Hydroskimming Refinery 20...

Vendredi 19 mai 2023

Prix : USD1000

PCC's Modular Refineries are designed and fabricated in our manufacturing base located in Tianjin, China. As the name implies, all equipment is constructed in modules that are designed to be transported quickly and easily anywhere in the world. Depending on the refining capacity,...

Vendredi 19 mai 2023

Large part machining service involving the part size up to 1.0 x 0.8M machinig capacity for tooling making and prototype manufacturing of mechanicl part. Notwithstanding the high degree of skill and knowledge required for all fabrication and machining processes, large part CNC machining...

Vendredi 19 mai 2023

5 axis cnc machining service provided for the manufacturing of complicated geometrical parts for both metal and plastic. 5-axis One of the most cutting-edge methods accessible now is CNC machining. It uses subtractive machining to give part production a limitless range of options...

Jeudi 18 mai 2023

Features of Cassava Stone Cleaning Machine Used to remove the stones in the material such as rigid particles of impurities, at the same time have an efficient function of cleansing and ascension Processing Capacity: 5-30Tons/hour Application Scope: Fresh potato washing to remove the...

Jeudi 18 mai 2023

Quantité : 500tons - Prix : USD0.015-----USD100

Cube magnets(cubic magnets) are special block magnets, which have the same sizes for length, width, and height. They are also called as magnet cube/cubic blocks. The neodymium cube magnets are the strongest cube magnets, they are made from bigger neodymium magnet blocks by cutting...

Jeudi 18 mai 2023

Round Duct Lock Seam Machine Performance Features: Model Thickness of plate(mm) Machining length(mm) Weight(kg) Power(kw) Dimensions(mm) L*W*H YJB-1250 0.4~1.2 1250 350 0.75 2250*610*1450 It's automatic type used for 0.4~1.2mm sheet metal duct lock seam closing, this...

Jeudi 18 mai 2023

Round Duct Lock Forming Machine Performance Features: Model Max thickness(mm) Power(kW) Shape Weight(kg) Dimensions(mm) L*W*H SA-12C 1.2 1.5 220 1070*570*920 SA-15C 1.5 3 340 1200*650*1050 lockformer machine is necessary for duct area because it can produce all...