RESULTS - 4506 Annonces

Samedi 04 novembre 2017

Wool fiber fineness value is measured by the airflow method. When exerting a certain pressure air to a certain amount of mass and volume of sample wool fiber, because the fineness of wool fiber is different, the flow of gas through is different, and by measuring the gas flow, the...

Samedi 04 novembre 2017

Products meet the standard requirements, which is YY0469-2004 "Medical surgical mask technical requirements" and YY 0969-2013 "Disposable medical masks", medical face mask air exchange pressure difference tester is measured by gas pressure difference on both sides of the mask (ie...)

Samedi 04 novembre 2017

This product uses fluorescent UV lamps, combined with temperature and humidity device to simulate the material decline in color, brightness, strength and cracking, spalling, powder, oxidation damage via the high temperature sun light (UV), high humidity, condensation, dark cycle etc...

Samedi 04 novembre 2017

The vibration fiber fineness tester works based on the stringprinciple. First, it measures the natural vibration frequency of the fiber with known vibration fiber length and tensile force, then automatically calculates the linear density of the single fiber. The fineness measurement range is 0...

Samedi 04 novembre 2017

Standardized sample clamping program, strictly meet the standards. While taking into account the operation, is simple and generous. The calorimeter has a long service life and stable performance. Radiant protective performance is an important performance index of flame retardant products...

Samedi 04 novembre 2017

The new high efficiency filter material filtration performance tester uses the current international mainstream particle counting method, the high efficient large flow laser particle counter to test the basic filtration performance parameters of filter material, such as filtration efficiency...

Samedi 04 novembre 2017

The UV aging test chamber is suitable for all kinds of geo-synthetics, such as light resistance, weather resistance and light ageing The exposure test of the sample was carried out in a fluorescent UV lamp vessel in a controlled environment. It can simulate and strengthen the environmental...

Samedi 04 novembre 2017

Introduction： Weatherproof test: This test is conducted to find out the impacts on some items and parts in a natural condition by such factors as sunbeam, ozone, rain, snow, temperature and humidity. It will also find out the resistance of the aforesaid items to the aging effects...

Vendredi 03 novembre 2017

Quantité : 200 - Prix : 20,00 €

Diamond Grinding Wheel for Carbide Before we know about diamond grinding wheel for carbide tools, we must first understand the performance of cemented carbide tools, then we can choose the correct diamond grinding wheel that in line with the characteristics of cemented carbide. Carbide...

Jeudi 02 novembre 2017

Yaskawa Servopack Amplifier AC Servo Drivers Sales in China No matter Made in China 2025 or Germany's “Industry 4.0” or United States' "Industrial Internet", high level industrial development is coming. Yaskawa drives cover every automation application need in the industrial plant...

Vendredi 27 octobre 2017

Introduction Manual friction fastness tester is the most commonly used instrument for the textile industry to detect the color fastness of the fabric to dry and wet rubbing. Under certain conditions, the sample is rubbed against the standard small white cloth. Assess the degree of...

Vendredi 27 octobre 2017

Building material decomposition smoke density testing machine for the stability of the material smoke smoke toxic hazard classification, does not apply to non-stable smoke smoke toxic hazard classification. Standards compliant: GB / T20285-2006 "Hazardous Classification of Tobacco...

Vendredi 27 octobre 2017

Universal pilling pilling viewer/Verivide Pilling Pilling Rating tester By comparing the sample to the standard card under the specified light source to obtain the rating results, apply to all the pilling test. Technical Parameters: 1, size length x width x height (L x W x H): 240mm...

Vendredi 27 octobre 2017

Fabric thickness tester mainly used to measure the thickness of the fabric, suitable for leather, rubber and textiles and other materials, the thickness of the measurement, to detect the standard situation. Standards compliant: ISO 1765: 1986, ISO 1766: 1999 (BS), BS 4051: 1987 (1996), BS 4098...

Vendredi 27 octobre 2017

Intelligent fiber heat shrinkable tester used to measure a variety of chemical fibers and natural fibers in the dry heat, high temperature steam, boiling water treatment after the heat shrinkage Meet the standard: GB / T6505-1986; FZ / T-T50004-1991 Instrument features: The instrument...

Samedi 21 octobre 2017

Quantité : 500tons - Prix : USD0.015-----USD100

Pot magnets are the most common permanent magnets assemblies, they are results of the development of magnets application, and play important roles in daily life. They can be used as holding magnets or magnetic holders, for example, some supermarket use pot magnets to hold product...

Samedi 21 octobre 2017

Quantité : 500tons - Prix : USD0.015-----USD100

Product Description Neodymium-iron-boron magnets short as NdFeB magnets, NIB magnets, neo magnets or neodymium magnets. Following called as NdFeB magnets or neodymium magnets.As a kind of rare earth magnets, neodymium magnets were developed from the year of 1983 , it is the most powerful...

Mercredi 18 octobre 2017

Specification. Pressure Rating: 1.6-16.0Mpa Specification: DN15-50 Material: cast steel Standard flanges: DIN, ANSI, JIS, JB79 Structural characteristics: 1.Automatic blowoff mechanism is installed inside the valve. It is a new-type crown valve plate with reliable sealing,and steam...

Mercredi 18 octobre 2017

Brief Introduction. This pressure reducing valve is robust direct acting bellows pressure reducing valve designed for use on steam,air and inert industrial type gases.The valve is available in four nominal sizes: DN25,DN32 ,DN40 and DN50. Set the outlet pressure through adjusting spring...

Mardi 17 octobre 2017

Application: Fabric surface waterproof performance tester to determine the resistance of any fabrics, which may or may not have been given a water-repellent finish, to surface wetting by water. It is not intended to predict waterproofness, since it does not measure the of water through fabric...

Mardi 17 octobre 2017

The Electronic Multifunction Socks stretcher is mainly used to determine the straight extension and transverse extension of stockings, swimwear, pantyhose, belly and knitted pants. Standards compliant: FZ / T 70006, FZ / T 73001, FZ / T 73011, FZ / T 73013, FZ / T 73029, FZ / T 73030...

Mardi 17 octobre 2017

Absorbent properties tester can be used for medical, sanitary nonwovens water absorption and water absorption of the determination of the instrument kits to meet a variety of different standards. Standards compliant: Edana 10.3-99, ISO 9073-6, IST 10.1 (95) Scope of application...

Mardi 17 octobre 2017

Brief Introduction: Digital Elmendorf Tearing Tester is used for determining the tear strength of fabrics, non-woven, paper, cardboard, film, woven materials, polymer film, etc. Core advantages: The Digital Elmendorf Tearing Tester is using Elmendorf method to determine the tear...

Mardi 10 octobre 2017

Heat Resistance Contact Tester Product Details: Heat Resistance Contact Tester is mainly used to test fire clothes, thermal protective gloves, or similar thermal protection material against thermal heat contact heat capacity. The contact time between the temperature of the material...

Mardi 10 octobre 2017

Digital bursting strength tester Standards： GB/T7742, FZ/T60019, ISO 13938.2, NEXT TEST METHOD 22 2006 ,WOOLMARK TM29 2000,EDANA 80.3-99,ISO 2758,ASTMD 3786,JISL108 Scope of application: Digital bursting strength tester is used for the detection of woven, knitted, non-woven fabrics...

Mardi 10 octobre 2017

Brief Introduction Colourfastness to ozone for textile color fastness test fabric is mainly used for color fastness properties exposed to ozone environment; it is the special equipment for test the fabric colorfastness to ozone resistance feature. Product Description 1. Equipped with...

Samedi 30 septembre 2017

Product Description Introdution<! -- span--> Forging is a manufacturing process involving the shaping of metal using localized compressive forces. The blows are delivered with a hammer (often a power hammer) or a die. Forging is often classified according to the temperature...

Mercredi 27 septembre 2017

Production of high-quality organic granular fertilizer is a complex task as the process is subject to various factors: variety and quality of raw materials, composition and compatibility of material formulation, moisture content and its variation during the granulation process, quality...

Samedi 23 septembre 2017

Heat Resistance Contact Tester Product Details: Heat Resistance Contact Tester is mainly used to test fire clothes, thermal protective gloves, or similar thermal protection material against thermal heat contact heat capacity. The contact time between the temperature of the material...

Samedi 23 septembre 2017

Brief Introduction Colourfastness to ozone for textile color fastness test fabric is mainly used for color fastness properties exposed to ozone environment; it is the special equipment for test the fabric colorfastness to ozone resistance feature. Product Description 1. Equipped with...