ACIDS - 5601 Annonces

Mardi 30 juillet 2019

Increasing the rate of filtration through the force on the solution over gravity, vacuum filtration is an operation of evacuating the air below the filter paper to maintain the pressure differential across the filter medium. It is widely applied in the laboratory for various tests...

Mardi 30 juillet 2019

Quantitative filter paper or qualitative filter paper, it is a question. While at the very beginning, we can distinguish from the literal meaning between quantitative and qualitative. Quantitative refers to fixed quantity, more about physical properties. Qualitative refers to fixed quality...

Mardi 30 juillet 2019

The improper use of chromatographic columns will make the columns decrease or lose effectiveness. Generally speaking, the columns always have problems at the end of them. If we can install a short column with the same stationary phase as the analysis column in front of analysis column...

Lundi 15 juillet 2019

The sample vials were cleaned according to different contamination levels. Generally, the cleaning method is selected according to the degree of pollution. If the cost is adequate, it is best to use a new one every time. Solution method of cleaning sample vials: 1. Rinse with running...

Lundi 15 juillet 2019

Laboratory workers use a membrane to filter two phases. Actually, the membrane is a kind of media. According to different aperture sizes, filter membranes can be divided into the microporous membrane, ultrafiltration membrane, nanofiltration membrane a nd reverse osmosis membranes...

Lundi 15 juillet 2019

The solid phase extraction cartridges (SPE column, or Solid Phase Extraction Cartridges, or SPE cartridges for short) is a sample pretreatment device for extraction, separation and concentration developed from a chromatography column. Mainly used in sample pretreatment of various foods...

Vendredi 12 juillet 2019

Cellulose Exaction Thimble For the cellulose exaction thimble (CET), parameters are mainly focused on the constitution, heating temperature. CET is usually made out of high-grade cellulose or seamless noble cellulose and lines of cotton, excluding any binding elements, which means...

Vendredi 12 juillet 2019

Note on the filter paper box that when using the quantitative and qualitative analysis filter paper to filter the precipitate: 1. Generally uses natural filtration, using the filter paper body and the ability to retain solid particles to separate the liquid and solid; 2. Because the...

Jeudi 11 juillet 2019

The polyethersulfone (PES) syringe filter with the feature of low protein binding and has excellent flow rates is mainly used for sterilizing or clarify viscous proteinaceous solutions especially in the life-science applications biological and pharmaceutical labs, this is because...

Jeudi 11 juillet 2019

Filter cartridges are purification equipment, with long service life, strong pollution capacity and low pressure and other characteristics, which are suitable for pharmaceutical, food, petroleum, electronic, chemical, metallurgical and textile industries. Features of filter cartridges 1...

Jeudi 11 juillet 2019

Columns Ahead Statement Generally speaking, SPE/FLASH is mainly applied to the pretreatment of samples. People can easily perceive that SPE/FLASH columns separate salt and sugar, while HPLC ones can make glucose, maltose and sucrose apart from the sugar solution, which posses more...

Jeudi 11 juillet 2019

First, the purpose of the request The colorectal flora in water was determined by the membrane method. Second, the basic principles The filter membrane method uses a filter to filter the water sample, and the bacteria are trapped on the filter membrane, and then the filter membrane...

Mercredi 10 juillet 2019

According to the research from the United States Department of Agriculture, the QuEChERS meth od which extracts pesticide from foods is fast, convenient, cheap, effective and secure. When it compares to the traditional SPE method, QuEChERS not only uses less solvent but also adopts...

Mercredi 10 juillet 2019

A bottle-top dispenser is a device installed at the mouth of a solvent bottle to take a large amount of solution and has been constantly updated and improved to meet the growing operational requirements of the laboratory for more than ten years. There are two kinds of bottle-top dispensers...

Mercredi 10 juillet 2019

The biggest feature of filter paper is paper with good filtration performance. At present, the filter papers produced in China mainly include quantitative analysis filter paper, qualitative analysis filter paper and chromatographic qualitative analysis filter paper. Quantitative filter...

Mardi 09 juillet 2019

Consisting of a filter medium and housing or holder that constrains and supports the syringe filter media in the sample's path, filters are good tools when you need removing particulates from samples in the lab. We have three basic types of laboratory filters. Membrane filters size...

Mardi 09 juillet 2019

Melt-blown filter cartridges are shaped filter cartridges, which made of non-toxic and odorless polypropylene particles after heating, melting, spinning, traction. Melt-blown filter cartridges are not only used in water purification, but also have excellent chemical compatibility...

Mardi 09 juillet 2019

First, the purpose of the request The colorectal flora in water was determined by the membrane method. Second, the basic principles The filter membrane method uses a filter to filter the water sample, and the bacteria are trapped on the filter membrane, and then the filter membrane...

Mardi 09 juillet 2019

Polymeric MCX SPE cartridges are used to extract strongly alkaline compounds. MCX is a mixed strong cation exchange adsorbent obtained by bonding sulfonic acid groups on highly crosslinked PS/DVB surface. It has both reverse phase and cationic exchange retentive properties and good...

Lundi 08 juillet 2019

QuEChERS is a pretreatment that has the characteristics of Quick、Easy、Cheap、Effective、Rugged and Safe, which is the reason why it is becoming more and more popular in the new testing methods. It was developed by Professor Anastassiades in 2003, which was used in agricultural testing at first...

Lundi 08 juillet 2019

1.Classification of extraction thimbles The extraction thimble, as its name implies, is a cylindrical element used for extracting. According to the material, it can be divided into three categories: cellulose exaction thimbles, glass fiber exaction thimbles, and quartz fiber exaction thimbles...

Vendredi 05 juillet 2019

We recommend materials and applications of two kinds of extraction thimbles in Hawach. The material of extraction thimbles Due to different materials of extraction thimbles, two types of extraction thimbles are sold in the Chinese market. Cellulose extraction thimbles: high-grade...

Jeudi 04 juillet 2019

The filler of polymeric HLB SPE cartridges produced by a special copolymerization technology contains a certain proportion of the hydrophilic group and the hydrophobic group. Hydrophobic divinyl benzene structures retain nonpolar compounds and hydrophilic n-vinyl pyrrolidone structures...

Jeudi 04 juillet 2019

A microporous membrane filter is a membrane separation technology, the shape of the cylindrical structure, made of 304 or 316L stainless steel, which can filter 0.1μm or more particles and bacteria in liquid and gas. Features A microporous membrane filter has the advantages of high...

Jeudi 04 juillet 2019

The glass fiber extraction thimble is made of ultra-fine glass fiber and is used for various applications. It's a high-efficiency filter device for collecting harmful substances such as soot, acid mist, and beryllium substitute. It has the advantages of high-temperature resistance...

Jeudi 04 juillet 2019

The bottle-top dispenser, also known as the bottle-top pipette, is an instrument for accurately measuring liquid medicine. It is widely used in the biological and chemical fields, as well as in clinical medicine, industrial and commercial laboratories. Bottle-top dispenser material Generally...

Mercredi 03 juillet 2019

Main introduction of the High alumina bricks High alumina bricks refer to fire brick containing Al2O3 more than 48%, which is made of high grade bauxite through high temperature calcinations. High alumina brick is a kind of neutral refractory material so that it enjoys excellent resistance...

Mardi 02 juillet 2019

The average sample addition recovery rate of QuEChERS method is higher than 85%, with fewer impurities interfering with the detection of the target substance, a small amount of solvent, simple and fast operation, which will be the preferred pretreatment method for routine detection...

Samedi 29 juin 2019

Quantité : 1 - Prix : US $7.00 - 8.00/ Pie

Application: HD PE is used where sliding abrasion occurs or where metal parts meet, causing friction or abrasion wear. It is good for chute and hopper liners, convey or components, wear pads, machine guides, impact surface and guide rails. Performance: Polyethylene board odorless...

Lundi 24 juin 2019

Liquid Level Measurement Device Overview XUYAN have several liquid level sensors and liquid level gauges for liquid level instrument. They have stainless steel probe shell, have optimized circuit design and good electronic isolation to get stable and exact liquid level data, the electronic...