Co2 laser engraving machine for hot sale

co2 clothing laser cutting machine price for Plastic

Laser cutting head

The laser emission system consists mainly of semiconductor laser diodes and diffraction gratings.laser diode can emit wavelength and laser with the same phase.the wavelength about 0.65-0.78 μm.</ p>

Reci W2/W4/W6/W8 Laser tube

The standard laser tube is 80w. Precision supplies 80-180 laser tube for your choice, you can choose according to your work and the work piece thickness.

Easy to Use LCD Control Panel

Fulong belt system< /span>

The belt is Shanghai Fulong brand, it is durable and hard deformed.

ABBA square rail :

sub-brand of SKF in Switzerland

The guide liner is Taiwan ABBA square rail, which is durable, after long time use, it will still have high precision.

Air Pump

The air pump is used for three basic reasons. The primary reason is the push fumes away from the laser's focal lens. This protects the lens from contaminants which could destroy the lens. The second function of the air pump is to push air into the material's kerf as created by the laser beam. Air that is applied to the kerf will remove debris/fumes and allow the laser light to penitrate deeper through the material. The third reason is that the air will help to cool the material. If the laser cut/engraved material stays hot, then it could warp or shrink. This air pump is a diaphram style which does not require oil. Oil or water in the air line could be projected directly onto the focal lens. This air pump has a higher air flow rate and is quieter than other piston-stroke designs.< /p>

Dedicated Micro Processor Controller for great performance

The heart of the laser machine is the industry leading Ruida controller. The Ruida motion controller is connected to the computer by USB connection. The computer downloads the project to the laser motion controller and it does all the work, leaving the computer and operator free to work on the next project. The dedicated Ruida controller has RAM onboard to store large projects without re-downloading from your computer.

Laser Head

precision supply short and long laser head for your choice. short laser head usually for cutting, long laser head usually for engraving.

Pass-Thru Doors.< /span>

The laser machine frame is built with doors that allow materials to extend out the front and/or rear of the machine. The pass-thru is helpful when engraving or cutting material that cannot fit completely inside the machine. Examples: Engraving pictures onto a bathroom shower door. Rolls of fabric threaded into the rear door, engraved or cut, and then pulled out the front door. Engraving the front door to my house. Engraving very large mirrors or sheets of glass. The limits are endless.

Blower / Fan / Vacuum.

The vacuum blower creates an air flow to remove dust and fumes from the work area of the laser machine. It is important to remove the dust and fumes from the laser engraving areas because dust can settle onto the mirrors or lens. Dust on the mirrors or lens will create a focal point of the laser's heat and soon destroy the optics. The fumes need to be removed from the operator work area because they can be irritating and unhealthy. The blower can also be connected to a vaccum box to pull air through the work material.