OXIDE - 1404 Annonces

Mercredi 21 février 2024

Ceramic grain is a new type of synthetic abrasive mineral. It is the most technologically advanced today, and it is widely used in the main processes related to the abrasive treatment of surfaces at the level of roughing and sanding extremely hard materials. A recent development in...

Mercredi 21 février 2024

Fujistar AX67 heavy sanding abrasive cloth for metal, the backing is Xwt cloth, which is ideal for making the sanding cloth belt. Calcined aluminum oxide bring good sanding performance. This Fujistar heavy sanding sand cloth has a good effect on sanding hardware, stainless steel and other metal...

Mercredi 21 février 2024

Fujistar's professional sponge abrasive product for automotive and electronic industry with high sanding efficiency and longer working lifetime. Covers a wide range of grits from medium to micro fine. Utimate sponge sanding product for treating surface of coating and metal. Once you've tried it...

Mercredi 21 février 2024

FUJISTAR Ewt velcro sanding roll AP82 adopts the special backing paper with antistatic properties and the open coating, FUJISTAR AP82 could be used for width belt and roll and disc. Using the special calcined aluminum oxide grain and highly strong resin adhesive, FU JISTAR AP82 has...

Mercredi 21 février 2024

FUJISTAR Ewt velcro backed sanding sheets AP57 adopts the special antistatic backing paper and the special treated open coating, FUJISTAR AP57 has the high anti-clogging property and long sanding life. With the special calcined aluminum oxide grain and highly strong resin adhesive...

Mercredi 21 février 2024

In refractory metals, molybdenum sheet has good thermal conductivity, electrical conductivity and low thermal expansion coefficient, has high strength under high temperature (1100~1650℃). Compared with tungsten, it can be easily processed, thus widely used in high temperature furnace...

Mercredi 21 février 2024

In electroplating, ruthenium iridium titanium anodes coated with precious metal oxides, such as iridium, play a crucial role as positive electrodes. These anodes exhibit high electrochemical catalytic performance, forming an essential part of the current transmission circuit. They...

Mercredi 21 février 2024

Zinc oxide arrester, otherwise known as a metal oxide surge arrester, is an electrical device used to protect electrical equipment from overvoltages and transients. The zinc oxide arrester is preferred over other technologies since it provides better energy handling capacity, longer lifespan...

Mercredi 21 février 2024

ZnO resistor is the core element of the lightning arrester. It mainly protects power system equipment by limiting lightning overvoltage to ensure that the line does not trip. The performance indicators of ZnO resistors mainly include potential gradient, flow capacity and nonlinear coefficient...

Mercredi 21 février 2024

MOV blocks are essential components for maintaining the integrity and reliability of electronic and electrical systems, as they can prevent costly damage and downtime caused by voltage surges. They are commonly employed in various applications, from protecting household appliances...

Mercredi 21 février 2024

A metal oxide varistor surge arrester (MOA) is an electrical device that is designed to protect electrical systems and equipment from surges caused by lightning, switching operations, and other sources of overvoltage. The MOA technology utilizes a mov surge arrester (MOV) element...

Mercredi 21 février 2024

Surge arrester medium voltage are electrical devices designed to protect electrical equipment from surges or transients that occur on medium-voltage power systems. These systems typically operate at voltages between 1kV and 36kV, and they are commonly found in various industries,...

Mardi 20 février 2024

ITO target is made up of a combination of indium oxide and tin oxide and serves as a crucial component in the production of ITO film. This film holds a significant position in the electronic information area and is used in a range of applications such as liquid crystal displays, organic...

Mardi 20 février 2024

As one of tungsten carbide scrap suppliers, we offer tungsten carbide scrap for sale at good wholesale prices. Tungsten carbide scrap materials can be roughly divided into the following three categories: (1) Waste products from tungsten processing: wire, coil, powder, sintered or...

Mardi 20 février 2024

Tantalum sheet metal is tantalum tungsten alloy plate, tantalum plate bright, no cracks, no peeling, no folding, no obvious oxidation, impurities pressed into defects. Contact us and get the tantalum plate price today! Specification of Tantalum Sheet Application of Tantalum Sheet...

Mardi 20 février 2024

Pure tungsten bar is made of 99.95% tungsten powder. Its physical properties are as follows: density 19.3g/cm3, melting point (liquid) 3422°C, conductivity 30% IACS Min, hardness 69HRA Min. The forging and annealing process results can be obtained by test. It possesses special properties...

Lundi 19 février 2024

STAINLESS STEEL SHEET Stainless steel (ss) is an alloy, which is iron-based and contains various combinations of other elements to give it characteristics suitable for a wide range of applications. The element that makes stainless steel stainless is chromium. By definition, any steel...

Lundi 19 février 2024

ROLL BONDED CLAD PLATE The Roll Bonded Clad Plate is the metal clad plate processed under the rolling mill's strong pressure. The backer and cladding metal's oxide layers are ground down and form a clean and activated fresh metal. The diffusion of the two metals during rolling achieves...

Lundi 19 février 2024

NICKEL AND NICKEL-BASE ALLOY SHEET Nickel is a nearly silver-white metal with a density of 8.9g/cm³. With melting point 1455℃ and boiling point 2730℃. It is hard, magnetic and has good plasticity. Nickel is malleable and ferromagnetic metal element, it can be highly polished and corrosion...

Vendredi 09 février 2024

This product contains carbon dioxide, the cream charger contains nitrous oxide. Because gases are so different, they can only mix with certain substances. N2O is used to make whipped cream and edible foams, while 16oz co2 is used for tire inflation and carbonated drinks. Features...

Vendredi 09 février 2024

The gas bomb contains nitrous oxide gas, the content is 16g, the color is silver, one-time use, can not be reused, each gas bomb can foam 1 liter capacity of liquid. Features of 16g N2O Cream Charger  Galvanized Surface The 16g cream chargers features a galvanized surface, offering...

Vendredi 09 février 2024

Our cream charger contains pure Food Grade nitrous oxide. The whip cream charger is made from 100% recycled carbon steel. Made to the highest standards, our casings contain neither metal fragments nor oily residue, so they do not introduce odors or oils into your preparation. N2O...

Jeudi 08 février 2024

Quantité : 20000 roll - Prix : 0.01~1 USD

The white zinc oxide tape is made of cotton cloth. The zinc oxide sports tape is used for the fixation of wound bandages, dressing and catheters in a surgical operation. The strappal zinc oxide tape produced by Fuluo, one of the sports tape manufacturers, can also be used in sports protection...

Mardi 06 février 2024

Silicon Carbide Disc Brush The Silicon Carbide Brush is specially used to deal with the surface of the metal, such as cast iron, aluminum, steel. Metal parts produced by cutting or die casting will inevitably have burr or flanging. If the burrs are not removed, it will lead to the...

Mardi 06 février 2024

Prix : 0.5-3

Wet dry sandpaper is great for wet and dry use, bringing many conveniences to your operations. We supply wet dry sandpaper with a good variety of grits. Applications of Wet Dry Sandpaper The durable paper backing helps create consistent patterns that are easily buffed out. RIKEN RMC...

Mardi 06 février 2024

Prix : 0.5-3

Flap Discs Products Polishing Flap Disc As one of flap disc suppliers, RIKEN RMC Flap Discs provide a system for removing material and finishing in one step, thereby, reducing both finishing time and finishing costs. Use in applications such as weld grinding, deburring, rust removal...

Mardi 06 février 2024

Prix : 0.5-3

Vulcanized fiber discs (commonly known as fiber discs) are round grinding wheels with a backing made of vulcanized fiber that is coated on one side with resin and abrasive grain. Abrasive fiber disc is fitted to suitable backing pads and used on angle grinders, predominantly for...

Mardi 06 février 2024

Prix : 0.5-3

RIKEN RMC F559 is a kind of aluminum oxide sandpaper for metal or wood with good flexibility and durable life. Premium Aluminum Oxide grain provides sharp, aggressive and high efficient performance, leaving the perfect surface with uniform scratch. Adopting premium imported Cwt...

Mardi 06 février 2024

H beams shot blasting machine is the most efficient and the most effective process to remove all forms of rust and corrosion materials from h beams prior to painting or coating. It is more efficient than steel beam shot blasting machine, steel bar shot blasting machine and scaffolding...

Mardi 06 février 2024

PIPE SHOT BLASTING MACHINE Free Quote Pipe shot blasting machine or steel pipe blasting machine is suitable for any diameter and length of steel pipe cleaning, it can remove the oxide, rust, and scale from welded steel pipe, so that the pipe surface shows metallic colors. Pipe outer...