CODES - 4286 Annonces

Jeudi 18 juin 2020

Description Product Name: HART to Modbus Gateway Model No: G1003 The gateway realizes protocol converting from HART to Modbus RTU / ASCII. Supporting to connect multi HART slave devices into Modbus network. In the gateway, HART terminal is master station, Modbus terminal is slave station...

Jeudi 18 juin 2020

As intelligent transition device, NCS-IF105 converter receives 0~20mA or 4~20mA analog signal (4 channels) and converts into fieldbus signal. NCS-FI105 converter uses digital communication technology, and makes the interface between field device and controller easier, and reduces...

Mercredi 17 juin 2020

NCS-TT108 smart temperature transmitter adopt PVC fire-retardant plastic shell, which can be installed in the control room. When it is required to be installed outdoors, outdoor Aluminum box, with a water-proof body and die-cast aluminum materials, must be selected. NCS-TT108 uses...

Vendredi 12 juin 2020

Quantité : 30pcs - Prix : 1,00 €

①The single use endo retrieval bag is not intended for use when endoscopic techniques are contraindicated. ②The single use endo retrieval bag is not intended for use with any shape edge tissue, like crushed bones. Endoscopic Retriever Bag Features & Benefits 6 sizes provide more...

Vendredi 29 mai 2020

Quantité : 1pcs - Prix : 40-200usd

This product is polished spherical lenses made by optical glass fused silica, sapphire or other optical materials which have relatively high transmission rate for a diode with an anti-reflection coating. Widely used for coupling light in and out of fibers. It has the advantage of...

Vendredi 29 mai 2020

Quantité : 50000m2/mo - Prix : $3-$10/m2

PTFE Adhesive Tape Introductions PTFE teflon adhesive tape is structured by PTFE coated glass cloth applied with pressure-sensitive silicone adhesive on one side, main features of PTFE adhesive backed tape is excellent release surface, high temperature resistant up to 260°C( 500°F)...

Vendredi 29 mai 2020

Quantité : 50000m2/mo - Prix : $3-$10/m2

Premium PTFE Coated Glass Fiber Introductions Premium PTFE coated fabrics contain a higher level of PTFE coating which makes it a more durable, superior smooth surface, quicker release, chemical resistant and low friction coefficient. The main property of premium PTFE coated fabrics...

Vendredi 29 mai 2020

Quantité : 50000m2/mo - Prix : $3-$10/m2

Porous PTFE Coated Fabrics Introductions Porous PTFE coated fabrics have a light coating of PTFE in order to make the fabric breathable while in the meantime keeping its non-stick property, the surface of this fabric is always has visible texture.It is always used in porous ptfe sheet...

Vendredi 29 mai 2020

Quantité : 50000m2/mo - Prix : $3-$10/m2

PTFE Coated Kevlar Fabric Introductions PTFE coated Kevlar fabric also called PTFE coated Aramid fabrics are structured by woven Kevlar fabric or Kevlar mesh coated with PTFE. There are two unique advantages of PTFE coated Kevlar fabric than PTFE coated fiberglass fabrics: First Kevlar...

Jeudi 28 mai 2020

Quantité : one unit - Prix : 50-150000usd

Electric Reach Forklift SAFETY AND STABILITY ●AC motor drive with high efficiency, no need to replace carbon brush, very good ramp starting performance. ●Two model function can control the speed of lift and lowering. ●Low center of gravity, excellent stability for operation. ●Small...

Vendredi 22 mai 2020

Quantité : more than - Prix : 3000-6500 euro per M

General Description of Prepainted Galvanized Steel Coil Pre-coated coil is a product obtained by chemical surface treatment (coating) of hot-dipped galvanized steel, galvanized steel or aluminum, followed by baking and curing. the total thickness of the pre galvanized steel coil consists...

Mercredi 22 avril 2020

Size：66mm (H) x 36.5mm (V) x 13.5mm (D) Display color: Black, white Resolution: 212(H) *104(V) Operating temperature: -25~15℃ Operating humidity: less than 75% Battery life: 5 years Product Description ESL tag for frozen food (ESL) system is used by retailers for displaying product...

Dimanche 19 avril 2020

The drill rod buckle conversion joint is a threaded buckle type at both ends of the drill tool, which can be changed to connect different types of threads and drills with different diameters. Some of them are externally threaded, airtight buckle variable buckle joints, and the other...

Samedi 18 avril 2020

Long Thread Connection Couplings are short lengths of pipe used to connect 2 joints of casing.They come with painted colour codes on their external surface to indicate their grades.Couplings are manufactured according to API 5CT and 5B specifications. Specification Size 4-1/2”~20”...

Vendredi 17 avril 2020

Quantité : 1000 - Prix : 20€

LOT DE TELEVISIONS 22" (55CM) D'OCCASION AVEC TELECOMMANDE ET SANS PIEDS. MARQUE IP3G MODEL : MSDV2208-600 ORIGINE HOPITAL TOUTES EN ETATS DE MARCHE LIVRES AVEC LES CODES DE DEVERROUILLAGE CONDITIONNE 80 PIECES SUR 2 PALETTES GERBES (80*120*200) PRIX 20€ H.T. Localisation : 24 rue...

Jeudi 16 avril 2020

Quantité : >=50pc - Prix : 62$

Technologie GPS automatique, sans aucune opération manuelle, partage de l'intensité du travail du conducteur, fonctionnement de sécurité Soutenir un nombre illimité de lignes et de lieux de visite, le meilleur choix pour plusieurs itinéraires avec un bus Peut facilement copier des...

Jeudi 16 avril 2020

Quantité : >=100pc - Prix : 60$

Technologie GPS automatique, sans aucune opération manuelle, partage de l'intensité du travail du conducteur, fonctionnement de sécurité Soutenir un nombre illimité de lignes et de lieux de visite, le meilleur choix pour plusieurs itinéraires avec un bus Peut facilement copier des...

Samedi 04 avril 2020

Quantité : 500000tons - Prix : $5-$200000

Non-rotating stabilizer(rubber sleeve stabilizer) is able to avoid blade wear and wall damage during. The non-rotating stabilizer consists of mandrel. Copper washer, rubber sleeve, spacer sleeve and self-locking lower sub. During drilling, the non-rotating stabilizer transfers the...

Samedi 04 avril 2020

Quantité : 500000tons - Prix : $5-$200000

Key Seat wiper Sliding sleeve type key seat reamer consists upper sub, mandrel, lower sub, sliding sleeve and so on, as shown in diagram. The sliding sleeve could move upward or downward and rotate freely on the mandrel, there are several spiral hard alloy blades welded on the sliding sleeve...

Jeudi 02 avril 2020

Quantité : 1pc - Prix : 60$

1. Technologie GPS automatique, sans aucune opération manuelle, partage de l'intensité du travail du conducteur, opération de sécurité 2. HUB de preuve de l'eau de haute qualité, conception de sous-dispositif 3. Soutenir un nombre illimité de lignes et de lieux de visite, le meilleur...

Mercredi 01 avril 2020

Quantité : 5 million - Prix : US$0.5-US$9.9

Features Padded certificate holder with high quality textured leatherette exterior One white silk moiré panel on top, one white cardstock on the bottom side Folded size of this padded diploma holder is 9"x11.5" fits one 8.5"x11" diploma Blank front cover for your school name and logo...

Mercredi 01 avril 2020

Quantité : 500 sets/ - Prix : 3000-10000 usd

(Flange forming machine is a main equipment for TDF flange forming, especially for large-scale, standardized and automatic production. TDF common plate flange system, not only produces common plate flange machine but also produces corresponding matching flange connection corner code...)

Vendredi 20 mars 2020

This powerful neodymium disc magnet measures 1/2" in diameter, 5/8" in thickness, with the pull force of 15.05 lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection. The applications...

Vendredi 20 mars 2020

The 1 inch magnets measure 3/4" in diameter, 1/8" in thickness, with the pull force of 11.7 lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection. The applications of the small circle...

Vendredi 20 mars 2020

This powerful neodymium arc magnet measures OD1.5" xID1.25" x0.75" Lx90 Degree. The 4 pieces of this arc magnets can form a circle with OD=1.5" , ID=1.25" and height =0.75" with working temperature of 302 degree Fahrenheit or 150 degree celsius. It is made from an alloy of neodymium...

Vendredi 20 mars 2020

This powerful neodymium disc magnet measures 3/4" in diameter, 1/8" in thickness, with the pull force of 9.76 lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection. The applications...

Vendredi 20 mars 2020

This powerful neodymium disc magnet measures 1" in diameter, 1/8" in thickness, with the pull force of 12.6 lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection. The applications...

Vendredi 20 mars 2020

We have cube magnets for sale! This powerful neodymium block magnet measures 3/4" in length, 1/4" in width, and 1/4" in thickness, with the pull force of 10.51 lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for...

Vendredi 20 mars 2020

We have industrial magnets for sale! This powerful neodymium disc magnet measures 1/2" in diameter, 1/16" in thickness, with the pull force of 3.1lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion...

Jeudi 19 mars 2020

Quantité : 1 - Prix : 100,00 €

DX-103G Grain Moisture Meter The grain moisture meter DX-103G is used for fast and accurate measurement of moisture in the process of allotment, acquisition, storage, machining of packed grains, barley, corn, hay, oats, rapeseed, rough rice, sorghum, soybeans and wheat. Features of...