TRANSCEIVER - 415 Annonces

Jeudi 20 octobre 2022

There are mainly three types of DAC/AOC: Passive copper cable, active copper cable and active optical cable. AOC is composed of integrated optoelectronic devices, which is used for high-speed and high-reliability transmission equipment between data centers and other equipment, and...

Jeudi 20 octobre 2022

Primus It provides 25G DAC and AOC, which are widely used in 5G fronthaul, data center and other scenarios. All products adopt a fully optimized structural design, and strive to control the consistency and stability of the product, and support customer customization. Specifications...

Jeudi 20 octobre 2022

50G optical modules are mainly used for intermediate transmission and backhaul in 5G networks. Backhaul in 5G covers the metro access layer, convergence layer and core layer. The metro access layer mainly uses 25G, 50G, 100G and other colour optical modules, while the convergence...

Mercredi 21 septembre 2022

In optical fiber communications, dispersion compensation modules (DCM) (also called dispersion compensation units, DCU) can be used for compensating the chromatic dispersion of, e.g., a long span of transmission fiber. Typically, such a module provides a fixed amount of dispersion (e...)

Mercredi 21 septembre 2022

CWDM Coarse Wave Division Multiplexing (CWDM) Multiplexer/Demultiplexer (MUX/DEMUX) modules support ITU-T G.694.2 wavelengths between 1270nm to 1610nm in 20nm increments. CWDM/X modules are protocol and rate transparent allowing different services up to 10Gbps to be transported across...

Mercredi 21 septembre 2022

40G&100G OTU service card launched by Sintai Communication Co., Ltd. supports two 40G or 100G service access. Its main function is to perform 3R regeneration of two 40G or 100G service signals that are accessed and can be transformed into two WDM standard wavelength optical signals...

Mercredi 21 septembre 2022

01- 40G QSFP+ Single Mode Transceiver Designed for 40G Ethernet and OTU3 links over single mode fibers, the Sintai 40G QSFP+ single mode optical transceivers use CWDM wavelengths (1271nm, 1291nm, 1311nm and 1331nm) and support transmission distance up to 40km. 02- 40G QSFP+ Multimode...

Mercredi 21 septembre 2022

Designed for 40G Ethernet and OTU3 links over multimode fibers, the Sintai 40G QSFP+ multimode optical transceivers use 850nm wavelength and support transmission distance up to 400m. 40G QSFP+ Multimode Transceiver Feature Adopt QSFP+ hot-swappable encapsulation with MPO/MTP interface...

Mercredi 21 septembre 2022

The integrated DWDM/CWDM platform of OTNS8600 II type optical transmission network system is mainly used in metro area nodes, and it solves the following shortage of fiber resources below the metro area network, completes a unified load and flat networking for multiple services in...

Mercredi 21 septembre 2022

01- 25G SFP28 Single Mode Transceiver Designed for 25G Ethernet 25GBASE-LR and CPRI/eCPRI links over duplex single-mode fibers, the 25G SFP28 LR industrial optical module supports transmission distance up to 10km using 1310nm wavelength. 02- 25G Transceiver Designed for 25G Ethernet...

Samedi 17 septembre 2022

Quantité : 15000 sets - Prix : More than 100 to mor

Our integrated wireless backstage communication systems help production teams achieve more flexible on-set camera adjustments without cabling limitations, allowing more flexibility in case of emergencies and ensuring efficient live shooting for the smooth running of each successful...

Vendredi 16 septembre 2022

Prix : 1-10usd

Fiber Optical Switch Optical line protection switch is an ideal component for OADM, OXC, system monitoring and protection. With the compact package, fiber optical switches can be easily integrated into a high density optical communication system. Designed by professional engineers...

Vendredi 16 septembre 2022

Prix : 1-10usd

MEISU's 90 degree Bending Fiber Arrays are fabricated with ultra small V-Groove substrate and special fibers of small bending radius. The compact dimensions with height less than 8mm makes it suitable for passive packaging in the board and ideal for connection on high speed silicon...

Vendredi 09 septembre 2022

T & S MTP / MPO fiber loop is a device used for parallel connection tests and an aging test of optical communication equipment. Well-designed by engineers at T&S, our MTP/MPO loopback adapter can transmit the optical network signal from the transmitter to the receiver, thereby...

Samedi 03 septembre 2022

Gearlink's GCS9L0C45 SFP china transceiver is compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the 1490nm DFB laser (the 1550nm DFB laser)...

Samedi 03 septembre 2022

Gearlink's SFP-GE-BX40 SFP transceiver is compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the 1310nm FP laser (the 1490nm DFB laser), and the PIN/TIA...

Samedi 03 septembre 2022

Gearlink's GCS5L0C35 SFP transceiver is compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the 1310nm FP laser (the 1550nm DFB laser), and the PIN/TIA...

Samedi 03 septembre 2022

Gearlink's SFP-GE-BX SFP transceiver is compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the 1310nm FP laser (the 1550nm FP laser), and the PIN/TIA...

Samedi 06 août 2022

ZigBee Dongle UZB100 is a USB2.0 interface zigbee usb linux, uses ARM 32bit Cortex-M4F architecture of nRf52840 SoC, frequency is up to 64MHz, integrated ZigBee protocol compliant RF transceivers and microprocessors, has the advantages and characteristics such as long communication distance...

Vendredi 05 août 2022

Quantité : 80KK/year - Prix : $1-$80

The FT-BX1D surge suppressor is used to enhance the surge susceptibility characteristics in the applications with DC/DC converters. As one of the most professional emi filter manufacturers, we provide communication module, medical dc dc converter, dc surge suppressor, surge suppression...

Vendredi 05 août 2022

Quantité : 80KK/year - Prix : $1-$80

MORNSUN emc power filter are used to enhance the EMC performance in the applications with power converters. As one of the most professional emi filter manufacturers, we provide transceiver module, medical dc dc converter, emc filters for ac power line, ac dc emi filter, emi filter module...

Jeudi 04 août 2022

Primus lT is a professional ftth manufacturer in China, committing to the research and development of PON technology and provides the best solution in ftth to ethernet/lan converter. Primus lT can cooperate in the development according to the special requirements of customers, and...

Jeudi 28 juillet 2022

T&S BWDM 3 Ports Device is a kind of FWDM device that can separate C-band and L-band or split C-band into two parts, or split L-band into two parts, which can be used in multi-channel WDM modules Make skip film. Features of Band Separator WDM Device Optical path epoxy-free Low...

Jeudi 28 juillet 2022

AOC is a cabling technology that accepts the same electrical inputs as a direct attach cable, but uses optical fiber "between the connectors". AOC uses electrical-to-optical conversion on the cable ends to improve speed and distance performance of the cable without sacrificing compatibility...

Jeudi 28 juillet 2022

T&S Communication TSQSS-8540G-xxxC is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+SR4 for 40 Gigabit Ethernet Applications. This transceiver is a high-performance module for short-range multi-lane data communication and interconnect applications. It integrates four data...

Mercredi 27 juillet 2022

One dimensional linear fiber array is made by placing M / MM / PM fibers on a V-grooved substrate at specified spacing ( pitch ). As for these V groove optical fiber arrays, or the so-called optical v groove fiber array, they are normally fixed into the grooves with epoxy and pressed...

Mercredi 06 juillet 2022

Prix : 100USD

Multi-rotor Flight Controller Highly Reliable Components Intelligent Avionics System Distributed Design T2 | Multicopter Flight Controller UAV flight controller is designed with second-generation hardware architecture and control algorithm. It is specially designed for unmanned aerial vehicles...

Samedi 18 juin 2022

GrenTech 40G QSFP+ LR4 compliant with IEEE 802.3ba and SFF-8436. It uses 4 channels CWDM solution with a LC connector, and it can transmit up to 10km over single-mode fiber. It has advantage of low power consumption and stable performance, and it widely uses in 40G Ethernet and data centres...

Samedi 11 juin 2022

For a long time, Primus It has been working to solve the bottleneck problem of network bandwidth optical modules through continuous technological innovation, adheres to concentrate superior forces constantly improve the industrial layout, and enhance the company's core competitiveness...

Samedi 11 juin 2022

The gpon vendors provided by Primus IT has three advantages: the first transmission distance is longer, the use of optical fiber transmission, the coverage radius of the access layer can reach 20 kilometres; the second can provide a higher bandwidth, 2.5G downstream / 1.25 upstream...