AEROSPACE - 1397 Annonces

Vendredi 11 mars 2016

Prix : 0.01-1USD

General Capabilities: Prototype of Stampings Production of Metal Stamping High Speed Metal Stamping Precision Metal Stamping Progressive Die Stamping High Quality, complex, tight tolerance Stamping Low volume prototypes to high volume progressive dies Taking over existing...

Jeudi 10 mars 2016

Before The Curing Appearance White Paste Tack Free Time ≤10 (min) Extrudability 5~11 (g/s，25℃) Cure Time 3～7(d) After the curing Relative Density 1.40～1.45 (g/cm3) Tensile Strength ≥2.5 (MPa) Break Elongation ≥500 (%) Shear Strength ≥2.0 (MPa) Hardness 45～55 (Shore...)

Jeudi 10 mars 2016

Before The Curing Appearance White Paste Tack Free Time ≤10 (min) Extrudability 5~11 (g/s，25℃) Cure Time 3～7(d) After the curing Relative Density 1.40～1.45 (g/cm3) Tensile Strength ≥2.5 (MPa) Break Elongation ≥500 (%) Shear Strength ≥2.0 (MPa) Hardness 45～55 (Shore...)

Jeudi 10 mars 2016

Before The Curing Appearance White Paste Tack Free Time ≤10 (min) Extrudability 5~11 (g/s，25℃) Cure Time 3～7(d) After the curing Relative Density 1.40～1.45 (g/cm3) Tensile Strength ≥2.5 (MPa) Break Elongation ≥500 (%) Shear Strength ≥2.0 (MPa) Hardness 45～55 (Shore...)

Mardi 01 mars 2016

Quantité : 999

Product Description The Window Tint Meter is applicable to measure the transmittance or haze of all kinds of transp arent, translucent samples with parallel plane (such as automobile manufacturing, aerospace, glass p roducts, plastic sheet, sheet, etc). Also can be used to determine...

Dimanche 28 février 2016

Before The Curing Performance Indicators A B Appearance Gray Fluid White Fluid Viscosity 1500～2500(cps) 1500～2500(cps) A: B 1: 1 Mixed Viscosity 1500～2500(cps) Operable Time 30～120(min) (Adjustable) Curing Time 3～5(h) After The Curing Hardness 40~50(Shore A) Dielectric...

Jeudi 28 janvier 2016

Wood pulp/cellulose polyester nonwoven fabric Wood pulp/cellulose polyester nonwoven fabric is made by 55% wood pulp/cellulose, 45% polyester under spunlacing nonwoven technology. We introduced spunlacing production lines from Germany, together with advanced technology, the wood...

Jeudi 31 décembre 2015

St52.0 Seamless Pipe is a special requirement of non-alloy steel seamless pipe, St52.0 Seamless tube Mainly used in chemical equipment, shipbuilding, pipeline and most of the mechanical design purposes. Type: PipeTube Standard: DIN 1629 St52.0 Seamless Pipe Specification: Outside diameter...

Jeudi 31 décembre 2015

St44.0 Seamless Pipe is a special requirement of non-alloy steel seamless pipe, St44.0 Seamless tube Mainly used in chemical equipment, shipbuilding, pipeline and most of the mechanical design purposes. Type: PipeTube Standard: DIN 1629 St44.0 Seamless Pipe Specification: Outside diameter...

Jeudi 31 décembre 2015

St37.0 Seamless Pipe is a special requirement of non-alloy steel seamless pipe, St37.0 Seamless tube Mainly used in chemical equipment, shipbuilding, pipeline and most of the mechanical design purposes. Type: PipeTube Standard: DIN 1629 St37.0 Seamless Pipe Specification: Outside diameter...

Mercredi 23 décembre 2015

St52.0 Seamless Pipe is a special requirement of non-alloy steel seamless pipe, St52.0 Seamless tube Mainly used in chemical equipment, shipbuilding, pipeline and most of the mechanical design purposes. Type: PipeTube Standard: DIN 1629 St52.0 Seamless Pipe Specification: Outside diameter...

Mercredi 23 décembre 2015

St44.0 Seamless Pipe is a special requirement of non-alloy steel seamless pipe, St44.0 Seamless tube Mainly used in chemical equipment, shipbuilding, pipeline and most of the mechanical design purposes. Type: PipeTube Standard: DIN 1629 St44.0 Seamless Pipe Specification: Outside diameter...

Mercredi 23 décembre 2015

St37.0 Seamless Pipe is a special requirement of non-alloy steel seamless pipe, St37.0 Seamless tube Mainly used in chemical equipment, shipbuilding, pipeline and most of the mechanical design purposes. Type: PipeTube Standard: DIN 1629 St37.0 Seamless Pipe Specification: Outside diameter...

Dimanche 20 décembre 2015

Everything Leader do is to be much innovative,performance in the electronics industry,the way we get is by offering one stop service and solution,we specialize in manufacturing thermal interface material,EMI conductive elastomers, and offering the best die-cut engineering for the...

Mercredi 09 décembre 2015

Type SUS304L is an extra low-carbon variation of Type SUS304 with a 0.03% maximum carbon content that eliminates carbide precipitation due to welding.It has slightly lower mechanical properties than Type SUS304. Grade: 300 Series Steel Type: Plate, Pipe/Tube, Coil Standard: ASTM A240...

Mercredi 09 décembre 2015

Type 304L is an extra low-carbon variation of Type 304 with a 0.03% maximum carbon content that eliminates carbide precipitation due to welding.It has slightly lower mechanical properties than Type 304. Grade: 300 Series Type: Plate, Pipe/Tube, Coil Standard: ASTM A240, JIS G4350...

Mercredi 09 décembre 2015

Type 304L is an extra low-carbon variation of Type 304 with a 0.03% maximum carbon content that eliminates carbide precipitation due to welding.It has slightly lower mechanical properties than Type 304. Grade: 300 Series Type: Plate, Pipe/Tube, Coil Standard: ASTM A240, JIS G4350...

Mardi 08 décembre 2015

Woven wire mesh for EMI RFI shielding Introduction Whether in the electronics industry,architecture,aerospace,or automotive, electromagnetic shielding is an problem of increasing significance. The stainless steel wire mesh will provide high frequency shielding performance. Stainless...

Samedi 26 septembre 2015

Quantité : more than - Prix : US$1000-US$10000

Programmable high low temperature humidity test chambers 1. Product introductions: (1) Programmable high low temperature humidity test chambers (2) Security, comfort and performance (3) Reduced upkeep and maintenance costs (4) Protection against condensation on test specimen 2...

Jeudi 27 août 2015

- Grade 5 Titanium Sheet - Primarily used in aircraft applications where strength is required but weight is a critical factor. Grade 5 titanium sheet has always been the first titanium choice in the aerospace industry. Due to the fact that it is not a malleable alloy, it is more...

Jeudi 20 août 2015

Model price (USD) Brightness Power Waterproof Material Switch Color Size (cm) Weight Lighting time SC-SH-MI03-A1 220lm(CREE-XPE) 3W Yes Aluminum alloy casing Press Tail-cap on/off Golden 8.7x1.7x1.4 20g (without battery) 2-3hours Mode: one mode (Just turn on/off) Light power...

Jeudi 20 août 2015

Quantité : 100pcs

Model price (USD) Brightness Power Waterproof Material Switch Color Size (cm) Weight Lighting time SC-SH-MIXX-M4 300lm(CREE-XPE) 900lm(CREE-U2） 3W 10W Yes Aluminum alloy casing Press Tail-cap on/off Black,red,golden,purple 13.5x3x2.3 78g (without battery) 3-5hours Mode...)

Jeudi 13 août 2015

Alcoa Wheels rolled a new aluminum wheel alloy, its first in 45 years, at the American Trucking Associations Management Conference and Exhibition on Sunday in Orlando, Fla., and will introduce its first new truck wheel featuring this alloy early next year.   Called MagnaForce...

Jeudi 13 août 2015

Quantité : 20000kg - Prix : 1.78usd/kg

Description of Glass Fiber Rove Glass fiber rove for winding is suitable for reinforcing unsaturated polyester resin, vinyl resin, epoxy resin, polyurethane resin etc. Characteristics of Glass Fiber Rove: Uniform tension, speed and fully , less hairiness, excellent mechanical properties...

Dimanche 09 août 2015

Quantité : 100000kg - Prix : 1.38----2.18USD/KG

Description of Glass Fiber Rove Glass fiber rove for winding is suitable for reinforcing unsaturated polyester resin, vinyl resin, epoxy resin, polyurethane resin etc. Characteristics of Glass Fiber Rove: Uniform tension, speed and fully , less hairiness, excellent mechanical properties...

Dimanche 09 août 2015

Quantité : 100000kg - Prix : 1.38----2.18USD/KG

Description of Glass Fiber Rove Glass fiber rove for winding is suitable for reinforcing unsaturated polyester resin, vinyl resin, epoxy resin, polyurethane resin etc. Characteristics of Glass Fiber Rove: Uniform tension, speed and fully , less hairiness, excellent mechanical properties...

Vendredi 07 août 2015

Quantité : 20000kg - Prix : 1.78usd/kg

Description of Glass Fiber Rove Glass fiber rove for winding is suitable for reinforcing unsaturated polyester resin, vinyl resin, epoxy resin, polyurethane resin etc. Characteristics of Glass Fiber Rove: Uniform tension, speed and fully , less hairiness, excellent mechanical properties...

Vendredi 07 août 2015

Quantité : 20000kg - Prix : 1.78usd/kg

Description of Glass Fiber Rove Glass fiber rove for winding is suitable for reinforcing unsaturated polyester resin, vinyl resin, epoxy resin, polyurethane resin etc. Characteristics of Glass Fiber Rove: Uniform tension, speed and fully , less hairiness, excellent mechanical properties...

Vendredi 07 août 2015

Prix : 1.98-3.28usd/kg

Glass Fiber Rove Description of Glass Fiber Rove Glass fiber rove for winding is suitable for reinforcing unsaturated polyester resin, vinyl resin, e poxy resin, polyurethane resin etc. Characteristics of Glass Fiber Rove: Uniform tension, speed and fully , less hairiness, excellent...

Vendredi 07 août 2015

Quantité : 50ton - Prix : 1.38----2.18USD/KG

Description of Glass Fiber Rove Glass fiber rove for winding is suitable for reinforcing unsaturated polyester resin, vinyl resin, e poxy resin, polyurethane resin etc. Characteristics of Glass Fiber Rove: Uniform tension, speed and fully , less hairiness, excellent mechanical properties...