CYCLE - 3341 Annonces

Mardi 01 novembre 2022

Quantité : 1000 sets/ - Prix : USD 500~50000

Aviation and aerospace are manifestations of high standard industrial capabilities. Induction heating is widely used in the aerospace industry, and many tasks such as mechanical parts connection, fast brazing, and welding require this technology for aviation safety. In the aerospace industry...

Mardi 01 novembre 2022

Quantité : 1000 sets/ - Prix : USD 500~50000

To realize the better performance of SWS-25A, JKZ has designed a fully digital control induction heating generator at the frequency range of 15~30KHz. It is designed with a maximum single machine power of 250KW and can be integrated with a state monitoring system. After a long time...

Mardi 01 novembre 2022

Quantité : 1000 sets/ - Prix : USD 500~50000

The frequency range of the MFS-500A 500KW IGBT type medium frequency generator is from 1KHZ to 10KHZ. Designed based on customers' actual billets size dimensions, MFS-500A adopts the standard voltage 3 phase 380V/50HZ; whereas, the equipment can also be customized according to customers'...

Lundi 31 octobre 2022

Quantité : 6M meter/y

What is a PTFE Membrane? Polytetrafluoroethylene membrane(PTFE membrane) is a synthetic material that expands to form a porous ptfe membrane (also called Teflon film/membrane) and can be laminated to functional fabrics. The microporous PTFE has waterproof, windproof, and heat-resistant...

Lundi 31 octobre 2022

Quantité : 6M meter/y

Our footwear films are ideal for use in harsh conditions and during strenuous exercise. S Series Footwear Film Provides Excellent Performance in Various Fields No matter what you are doing, our footwear film will keep you in the most comfortable state, so that you feel more free and protected...

Dimanche 30 octobre 2022

Prix : 1000-6000USD

Model: YEV-300 YEV-600 YEV-1000 YEV-2000 YEV-3000 Product Performance Force: 300kgf / 600kgf / 1000kgf / 2000kgf / 3000kgf Max acceleration: 100g(without load) Max displacement: 51mm Max speed: 1.6/1.8/2 m per minute Description of High-Frequency Electromagnetic Vibration Test Machine...

Dimanche 30 octobre 2022

Materials of Sunkye MIL DTL 26482 Plug Series Small Circular Connector Shell: aluminum alloy Finish: olive drab cadmium (W), black anodized plating (F), black zinc nickel (K), Nickel(T) Backshells Aluminum alloy Cable glands: Thermoplastic Coupling ring: Aluminum alloy Spring washer...

Dimanche 30 octobre 2022

The high pressure high temperature hthp electrical connectors are designed to support the signal transmission of high voltage rating, and there is no safety risk for operators. In the design of connection system, the very high temperature connectors shall have 360° shielding layer...

Samedi 29 octobre 2022

Pipe shot blasting machine or steel pipe shot blasting machine is suitable for any diameter and length of steel pipe cleaning, it can remove the oxide, rust, and scale from welded steel pipe, so that the pipe surface shows metallic colors. Pipe outer wall shot blasting machine pipe...

Samedi 29 octobre 2022

Prix : 5000-30000

Industrial Molding Parts Industrial moulding parts are referred to the plastic parts of industrial precision molded products, we preferred to think of it as non-consumer products. Nowadays, the demand for consumer products is oversupplied, and the demand for industrial products is increasing...

Samedi 29 octobre 2022

Prix : 5000-30000

Home Appliance Mould Embroidery Machine Frame Mould 4937-2 Plastic frame for a multi-needle embroidery machine. Mould Name: Embroidery Machine Frame Mould Part Material: Pa 66 GF50% Product Description Large Embroidery hoop frame Mould Cavity: 1 Cavity Mould Size: 450*650*410 mm Mould...

Samedi 29 octobre 2022

Prix : 5000-30000

Plastic Gear Mold Design 49122 Mould Name: Custom Plastic Gear Mould Part Material: PA6 Product Size: 33*16.5mm Product Description: Plastic Motor Gear Mould Cavity: 4 cavities Mould Size: 350*350*332 MM Mould Cavity Steel: 8407 Mould Injection System: 3 plate point gates hot runner...

Samedi 29 octobre 2022

Prix : 5000-30000

Family Mold Injection Molding 491138 Mould Name: 1+1 Family Mould Part Material: PA6 GF30 Product Size: 78*35.6mm Product Description: Scharnier right & Left Mould Cavity: 1 + 1 Cavity Mould Size: 350*400*498MM Mould Cavity Steel: 8407 Mould Injection System: 3-plate point gate...

Samedi 29 octobre 2022

Prix : 5000-30000

Double Shot Plastic Injection Mold Products Part function: Jug Cap Part material: PP & POE Cavity: 2+2 cavities Cavity steel: ASSAB 8418 Life Cycle: 1,000,000 shots Lead time: 55 working days after deposit Payment: 40% deposit, 30% after first of trial, 30% before shipping HanKing...

Samedi 29 octobre 2022

Prix : 5000-30000

Double Injection Mold Parts Part function: Plastic Lid for coffee machine Part Standard according to ISO 11496 Surface: SPI A-2 finish Flammability classification: UL-94 HB Part material: ABS & TPE Shrinkage: 0.55% Cavity steel: ASSAB 8407 Life Cycle: 500,000 shots Payment: 40% deposit...

Samedi 29 octobre 2022

Rosun water disinfectant powder is an advanced oxidation technology basing on sulfate radical [SO4-], using potassium monopersulfate compound powder (2KHSO5.KHSO4.K2SO4)as its active ingredient. By using high-energy activation technology to produce active oxygen [O] through the...

Vendredi 28 octobre 2022

Quantité : 2-4999 - Prix : $4.00

New Original Simcom Wireless Module Multi-mode GSM/GPRS+GPS Chip Datasheet Module [Protocol]：NMEA0183 V4.1 and earlier version, the maximum refresh rate is 10Hz [Certification]：Pending [Package]：Half Hole (SMT) [Introduction]：E108-GN01 is a highly integrated, low-cost, low-power,...

Vendredi 28 octobre 2022

Quantité : 1-2000 - Prix : 1-100

SMC Auto Parts Description SMC auto parts made from sheet molding compound (SMC) are typically 25-35% lighter than steel parts and aluminum products of the same strength. The stroke is increased and the fuel consumption is greatly reduced. SMC Auto Parts Manufacturer Waiwaitree is...

Vendredi 28 octobre 2022

Quantité : 1-2000 - Prix : 1-100

Cars, buses, trucks, transport and special vehicles • Weight: Parts made from sheet molding compound (automotive smc) are typically 25-35% lighter than steel parts and aluminum products of the same strength. The stroke is increased and the fuel consumption is greatly reduced. • Stable shape...

Jeudi 27 octobre 2022

Multi cavity mould is an injection mold that has more than one cavity. The shape of each cavity is the same. Multi cavity mold design is to produce multiples of the same part for high volume production since it means each production will produce a large number of finished parts...

Jeudi 27 octobre 2022

With more than 20 years of experience in clean room injection molding, as the medical silicone molding company in China, we specialize in various clean room injection molding process techniques including medical device injection molding and medical grade medical silicone molding...

Jeudi 27 octobre 2022

Packson is not totally the same as other medical plastic injection molding companies. Because we are an ISO-certified medical injection molding provider. Packson had got the certification of ISO 13485: 2018 and ISO 9001: 2008. We've been working with healthcare and medical molding...

Jeudi 27 octobre 2022

2k injection molding process is one type of injection mold. It is also named as two shot molding, double shot molding, double-color mold, Multi-material, or multi-component injection mold. 2k plastic injection moulding consists of two different plastic materials and colors. With...

Mercredi 26 octobre 2022

Laundry always become a problem if you do not own a china portable washing machine for yourself. Laundromat can not guarantee the safety of your clothes and public washer always seems to far from your apartment. Well, now this little comes and do all the magic for you! It's space-efficient...

Mardi 25 octobre 2022

Prix : US$20000~25000

Robot + Integrated solutions Forge in-building service ecology, achieve service vicious cycle In-building consumption feedback, share intelligent service dividends Intelligent service Digital management Inter-business collaboration Increased revenue Building service management platform...

Samedi 22 octobre 2022

Tianhe provides different types of cheap sanitary napkins wholesale with high quality. We have both small short size and large long size, mini or extra large bulk sanitary pads also available by our advanced making machine. As a reputable sanitary napkin pads company, we also supplies...

Samedi 22 octobre 2022

Prix : 10-30USD

Custom lithium battery packs include Li ion battery packs (or called Lithium ion packs), LiFePo4 battery packs, Lithium polymer battery packs, which are customized lithium ion power packs, lifepo4 power packs, lithium polymer battery cells to reach different requirements of battery pack capacity...

Samedi 22 octobre 2022

Prix : 10-30USD

PLS LiFePO4 li ion battery packs are assembled with PLS cells, which may have 14500, 18500, 18650, 26650, 32650, and some prismatic high capacity models. These battery packs are common used for backup power supply, renewable power storage, lead-acid battery replacements. We, a lifepo4...

Samedi 22 octobre 2022

Types of small tube cleaning brushes Tube brush is a very efficient, convenient and cost-effective tool, which is widely used in food, manufacturing and other industries. Tube brush can be easily installed on pneumatic tools, machine tools, bench drills, or can be used directly by hand...

Samedi 22 octobre 2022

This kind of brush is mainly used on the surface of the workpiece, the internal polishing of the groove. We can provide an aluminum alloy base as required for installation. At the same time, the strip brush can be made in various types of derivative patterns, for example, can be wound...