ABRASIVES - 1444 Annonces

Mardi 16 juin 2020

Quantité : 10000 Piec - Prix : 150-10000

Overview of bi center bit This type of bi center drill bit mainly used for medium to medium-hard compressive and abrasive formation, it has medium and high-density parabolic crown and heavy cutters density for the bit has good impact resistance and anti-abrasive, high wear-resistant...

Mardi 16 juin 2020

Quantité : 10000 Piec - Prix : 150-10000

Great bits design and manufacture a wide variety of Matrix body PDC (polycrystalline diamond cutter) bits. Our PDC bits are offered in a variety of sizes, blade count and cutter sizes. The Matrix body PDC bit is sintered with tungsten carbide powder. Gauge protection with natural diamond...

Mardi 16 juin 2020

Quantité : 10000 Piec - Prix : 150-10000

PDC Bit PDC bit is Polycrystalline Diamond Compact bit ,it also named Diamond bit. pdc bit classification According to the Material Classification： Matrix body PDC bit: It was made by tungsten carbide powder,and gauge protection is TSP. Steel body PDC bit: AISI 4145H heat treatment...

Mardi 16 juin 2020

Quantité : 10000 Piec - Prix : 150-10000

Overview of Core Barrel Roller Bit The roller bit core barrel uses high carbon steel and a special bit Angle to maintain drilling strength and efficiency. There are three types of core barrels: Core barrel with bullet teeth is used for cutting an annular ring in rock or concrete(also...)

Mardi 02 juin 2020

Quantité : 40 pieces - Prix : $42,000-357,000

Taiye high quality drill bits uses high-quality raw materials, advanced production technology and strict inspection methods to produce "Pangolin DTH" impactors and drills with excellent performance and quality. We provide pangolin DTH impactors and drill heads of drilling rig equipment...

Vendredi 22 mai 2020

Quantité : more than - Prix : 3000-6500 euro per M

Description of Pickled Coils Pickling is a production procedure to remove the oxide scale on the cold rolled steel coil surface during steelmaking. The"pickle tank" that the cold rolled steel coil sink and runs in a diluted solution of inorganic acid, it usually chose to use the hydrochloric...

Samedi 16 mai 2020

Quantité : 121 pcs /m - Prix : 1665USD

1, pompe à lisier en caoutchouc minier Paramètre technique : A) Calibre: DN65-DN300mm B) Flux: 50-1800 m3 / h C) Tête: 50-94 m D) Rotation de la vitesse: 740-2900r / min E) Pression de travail: ≤ 3,6 mpa 2, Aperçu de la production La pompe à boue ZH est une pompe centrifuge, afin...

Vendredi 17 avril 2020

Quantité : 10 stages - Prix : 2000-60000USD

Affordable water jet machine china to make a difference in your cutting If you are in the market for a machine to ream or shape materials while ensuring utter perfection in their details, Yongtao will cater to your needs. We offer CNC water jet cutters for high-precision processing of granite...

Mardi 31 mars 2020

Quantité : 10000 Piec - Prix : 150-10000 USD

PDC bit is Polycrystalline Diamond Compact bit ,it also named Diamond bit. It is widely used，such as diamond drill bit for China /diamond drill bits for rock According to the Material Classification： Matrix body PDC bit: It was made by tungsten carbide powder,and gauge protection is TSP...

Mardi 31 mars 2020

Quantité : 10000 Piec - Prix : 150-10000 USD

Great bits design and manufacture a wide variety of Matrix body PDC (polycrystalline diamond cutter) bits. Our PDC bits are offered in a variety of sizes, blade count and cutter sizes. The Matrix body PDC bit is sintered with tungsten carbide powder. Gauge protection with natural diamond...

Mardi 31 mars 2020

Quantité : 10000 Piec - Prix : 150-10000 USD

Longer Working Life Hybrid Drill Bits Improve Drilling Effeciency Overview of Hybrid Drill Bit Hybrid drills bits are compounded by the PDC fixed cutting and the roller free cutting structure. The teeth on the cone crush the rock by impact crushing, forming broken pits at the bottom of the well...

Mardi 31 mars 2020

Quantité : 10000 Piec - Prix : 150-10000 USD

Bi-center bit for Mining Machinery and abrasive formation Overview of Bi-center Bit This type of Bi-center bit mainly used for medium to medium-hard compressive and abrasive formation, it has medium and high-density parabolic crown and heavy cutters density for the bit has good impact...

Mercredi 11 mars 2020

The raw material of the glass beads is glass sand, which is fused into a spherical shape by high temperature suspension and then annealed to eliminate internal stress and prevent breakage. This transparent, clear spherical structure product does not have particles embedded in the...

Jeudi 09 janvier 2020

Quantité : 1000pcs - Prix : 10-100US D

Material: aluminum Process: Cnc machine-wire drawing-reveting-anodizing-silk printing Color: steel color（we offer powder coating and we supply red，black，blue and other colors ） Tolerance：+-0.1mm The surface of this product is very smooth. There is no burr at the edge of the board...

Mardi 17 décembre 2019

Quantité : 100 - Prix : USD3-50

Most of the glasses display stand design are: rotating display stand , ladder display stand, L-type display stand, tray type, display case, pull box type; just like watch display, jewelry display, makeup display, acrylic display products are the most common , because of its plasticity...

Samedi 16 novembre 2019

Quantité : 8000kgs - Prix : USD0.025 - USD1.05

TSP diamond is made of diamond micro powder and a small amount of binder sintered under high temperature and high pressure. It has high wear resistance, strong impact toughness, good thermally stability, and dense structure, and is widely used in the manufacture of petroleum, geological...

Samedi 16 novembre 2019

Quantité : 8000kgs - Prix : USD0.025 - USD1.05

Our Saw Grit series are with cube-octahedron particles, for stone and construction engineering industries such as Granite, Marble, Concrete, Asphalt, Bricks etc. Synthetic diamond grit provides premium thermal stability and impacts resistance performance. EA-S700 Highest toughness...

Samedi 16 novembre 2019

Quantité : 8000kgs - Prix : USD0.025 - USD1.05

The Friable type of diamond micron. Diamond Resin bond micron Is made from Diamond Resin Bond Mesh. It has a multi-crystalline structure, rough surface, and uniform shape. The sharp edges always generate during cutting, grinding, lapping, and finishing. With such unique characteristics...

Samedi 16 novembre 2019

Quantité : 8000kgs - Prix : USD0.025 - USD1.05

1) Properties Detonation-synthesized polycrystalline diamond micro powder The structure resembles the rare natural polycrystalline black diamond, metallic-grey, superior toughness, self-sharpening. The lapping and polishing efficiency of the detonation-synthesized polycrystalline...

Samedi 16 novembre 2019

Quantité : 8000kgs - Prix : USD0.025 - USD1.05

Our micron diamond powder offers good Roughing, Lapping and finishing result. For resin bond, vitrified bond, and electroplated bond. Application: for stone, watch, optical glass etc. EA-MW19 Irregular shape, low toughness, uniform Particle Size Distribution. The best choice when...

Samedi 16 novembre 2019

Quantité : 8000kgs - Prix : USD0.025 - USD1.05

The diamond wire drawing die blanks are produced under ultra-high temperature and ultra-high pressure. It consists of diamond powder and metal catalyst (Cobalt). It features high wear resistance, hardness and thermal conductivity, high mechanical strength, and tenacity. PCD wire drawing...

Samedi 16 novembre 2019

Quantité : 8000kgs - Prix : USD0.025 - USD1.05

CBN micron has unique characteristics in thermal stability, working efficiency, and sharpness. It can be used in resin, metal, and vitrified systems, for precise grinding, polishing and finishing workpiece surface, PCBN blank manufacturing. It works as free grinding particles and pastes as well...

Vendredi 01 novembre 2019

Quantité : 200 units - Prix : 7000-28000 USD

The big irregular workpieces blasting and painting job has been widely completed by sand blasting rooms and painting rooms, cause of this of kind parts have all kinds of shape, it is very hard to arrangement the blasting turbines to automatically blast cleaning the big workpieces at all angles...

Vendredi 01 novembre 2019

Quantité : 200 units - Prix : 7000-28000 USD

Rotary shot blast machine or table type shot blasting machine is suitable for various shapes and dimensions, casts, forged parts, pressed parts, steel, and non-ferrous metal parts and parts made from fragile materials, cleaning surface, removing casting sand and filings, consolidating...

Vendredi 01 novembre 2019

Quantité : 200 units - Prix : 7000-28000 USD

Pipe shot blasting machine or steel pipe shot blasting machine is suitable for any diameter and length of steel pipe cleaning, it can remove the oxide, rust, and scale from welded steel pipe, so that the pipe surface shows metallic colors. Pipe outer wall shot blasting machine Pipe...

Vendredi 01 novembre 2019

Quantité : 200 units - Prix : 7000-28000 USD

Paver shot blasting machine is mainly used for surface roughening treatment of marbles, granites, concrete products, and natural stone. It includes stone shot blasting machine and marble shot blasting machine. It provides twin advantage foremost subject field end provides outstanding...

Vendredi 01 novembre 2019

Quantité : 200 units - Prix : 7000-28000 USD

Overhead conveyor shot blasting machine allows the workpieces to move with constant speed through the machine. The conveyor consists of a chain and trolley system suspended from a monorail, and can be driven at a constant speed or can be indexed. A special feature of the continuous...

Vendredi 01 novembre 2019

Quantité : 200 units - Prix : 7000-28000 USD

H beams shot blasting machine is the most efficient and the most effective process to remove all forms of rust and corrosion materials from h beams prior to painting or coating. It is more efficient than steel beam shot blasting machine, steel bar shot blasting machine and scaffolding...

Vendredi 01 novembre 2019

Quantité : 200 units - Prix : 7000-28000 USD

Gas cylinder shot blasting machine is used to automatically clean the surface of the cylinders by blasting of the abrasive coming from the blast turbines of the machine in a confined chamber. The cylinders get shot blasted as they pass through the blasting chamber on the base of the machine...

Vendredi 01 novembre 2019

Quantité : 200 units - Prix : 7000-28000 USD

When factory space is at a premium or a temporary site is to be utilized our blasting containers provide an instant and economical solution. Shot blasting container rooms are based upon standard shipping container sizes which reduce the design and fabrication costs that are normally...