HEAT - 11784 Annonces

Vendredi 11 mars 2016

Prix : 0.01-1USD

General Capabilities: Prototype of Stampings Production of Metal Stamping High Speed Metal Stamping Precision Metal Stamping Progressive Die Stamping High Quality, complex, tight tolerance Stamping Low volume prototypes to high volume progressive dies Taking over existing...

Jeudi 10 mars 2016

Introduction: ZRS-3H The Glow-wire Tester adopts high temperature coating spraying on steel structure, Glow wire tester is to test glow wire of lighting lamps, electronic products and household appliances, and UL 746A, IEC829, DIN695, VDE0471, the Glow wire tester ZRS-3H is suitable...

Jeudi 10 mars 2016

Introduction: It is according to IEC60068-2-1(GB/T2423.1) and IEC60068-2-2(GB/T2423.2). It is used to test the CFL/LED which meets IES LM-80-08, electricity products, electronic components, material and so on. Specification: •The chamber is produced by SUS304 Steel, the temperature...

Jeudi 10 mars 2016

Before The Curing Appearance White Paste Tack Free Time ≤10 (min) Extrudability 5~11 (g/s，25℃) Cure Time 3～7(d) After the curing Relative Density 1.40～1.45 (g/cm3) Tensile Strength ≥2.5 (MPa) Break Elongation ≥500 (%) Shear Strength ≥2.0 (MPa) Hardness 45～55 (Shore...)

Jeudi 10 mars 2016

Before The Curing Appearance White Paste Tack Free Time ≤10 (min) Extrudability 5~11 (g/s，25℃) Cure Time 3～7(d) After the curing Relative Density 1.40～1.45 (g/cm3) Tensile Strength ≥2.5 (MPa) Break Elongation ≥500 (%) Shear Strength ≥2.0 (MPa) Hardness 45～55 (Shore...)

Jeudi 10 mars 2016

Before The Curing Appearance White Paste Tack Free Time ≤10 (min) Extrudability 5~11 (g/s，25℃) Cure Time 3～7(d) After the curing Relative Density 1.40～1.45 (g/cm3) Tensile Strength ≥2.5 (MPa) Break Elongation ≥500 (%) Shear Strength ≥2.0 (MPa) Hardness 45～55 (Shore...)

Mercredi 09 mars 2016

Quantité : 100000 - Prix : 9-10/meter

Yarn Count: 20*16 Material: 100% Cotton Width: 57/58" Weight: 260gsm Model Number: Ysetex Color: all coolor is available Color fastness: 4-5 Grade Formaldehyde content：Less than 300ppm or 75ppm according to customer's requirements Char length ：Less than 100mm After glow Less...

Mercredi 09 mars 2016

Quantité : 200000 - Prix : 15-18/piece

Material : 100% Cotton 100% cotton flame resistant fabric Feature: Anti-Static, Anti-UV, Blackout, Flame Retardant, Fusible, Heat-Insulation, Shrink-Resistant, Tear-Resistant, Waterproof Use: Cover, Curtain, Garment, Industry, Jean, Lining, Raincoat, Color: all color is available...

Mercredi 09 mars 2016

Quantité : 20000piece - Prix : 13-25/piece

Material : 100% Cotton 100% cotton flame resistant fabric Feature: Anti-Static, Anti-UV, Blackout, Flame Retardant, Fusible, Heat-Insulation, Shrink-Resistant, Tear-Resistant, Waterproof Use: Cover, Curtain, Garment, Industry, Jean, Lining, Raincoat, Color: all color is available...

Mardi 08 mars 2016

Main Features: JM series spinning extruder is applicable to the chip of PETP,PA6,PA66,PP etc. melting and spinning. Adopting good quality material,advanced design and processing technology makes our spinnin g extruders widely used for big project of chemical fiber successfully....

Mardi 08 mars 2016

ZLYJ series gearbox is a high accuracy and hardened tooth surface transmission device, which is designed for single screw extruder with thrust block. The design of gearbox adopt JB/T9050.1-1999. Main features: 1.The material of gear is high strength alloy steel through gear grinding...

Mardi 08 mars 2016

- Segment screw barrel/Screw element/Segment screw and barrel - - Screw elements for counter-rotating parallel twin screw extruder Specification: Parallel twin screw diameter: Φ 18-Φ 177mm - The building block screw consists of core spindle and several hollow screw segments...

Mardi 08 mars 2016

Planetary screw barrel/ Planetary screw and barrel for plastic extrusion Specification: Diameter: Ø15-Ø500 L/D ratio: 5: 1 We can manufacture all types of screws and barrels according to clients' requirement. Base Materials: 1)38CrMoAlA(JIS SACM 645) 2)42CrMo(AISI 4140) ...

Mardi 08 mars 2016

Bimetallic conical twin screw and barrel for plastic extrusion machines Specification: 45/90, 45/100, 50/105, 51/105, 55/110, 55/120, 58/124, 60/125, 65/120, 65/132, 68/143, 70/135, 70/140, 75/150, 80/143, 80/156, 92/188 The above are standard specifications, we can customize...

Mardi 08 mars 2016

barrel for rubber extruder Pin Screw and Barrel Specification: Ø75mm~Ø200mm Cold/Heat Feed Screw Specification: Ø65mm~Ø650mm Screw structure and compression ratio can be designed according to different products and raw material. Base Materials: 1)38CrMoAlA(SACM 645) 2)42CrMo(AISI...

Mardi 08 mars 2016

Single screw and barrel for extruder Specification: Diameter: Ø15-Ø300 L/D ratio: 15-55 Base Materials: 1)38CrMoAlA(SACM 645) 2)42CrMo(AISI 4140) 3)Cr12MoV(SKD11) 4)4Cr5MoSiV1(SKD61) 5)9Cr18MoV 6)40Cr Bimetallic Alloy Materials: 1)Fe-based alloy 2)Ni-based alloy 3)Co-based...

Lundi 07 mars 2016

Quantité : 60T/MONTH - Prix : 9.8 USD/KG FOB HUANG

pad printing silicone is well applied for printing pads making of perfect irregular patterns on plastics toys, electronic toys trademarks, keyboards, electroplating products ect. Appearance: Part A: an non-toxic and odorless liquid in white/yellow/red color Part B: an non-toxic...

Dimanche 06 mars 2016

Quantité : 60t/month() - Prix : usd 6.3 FOB huangpu

1.description Platinum cure electronic potting silicone rubber is two parts with low viscosity, and it can be cure d completely at room temperature.platinum cure electronic potting silicone rubber is with stronger h eat-resistence than that of condensation type. 2.appearance Part A...

Samedi 05 mars 2016

Quantité : MOQ 1000 m - Prix : 0.1-3usd

Duct rodder are composed of fiber glass rod which is extruded by fiber glass and high strength resin at high temperature. This type of rod has high tensile strength and flexibility. It was covered by a high density polyethylene engineering plastic as its protect layer,which make...

Samedi 05 mars 2016

Quantité : 10000pcs - Prix : US $1.0-2.8 / Piece

Size: W: 1.0cm, 1.6cm, 2.0cn, 2.5cm; L: 150cm, 180cm. As your requested Material: Polyester/nylon/cotton/pp Technique: Jacquard/heat transfer/silk screen Color: As customers' requested Sample: Free Sample Lead Time: About 1-3 days Transportation Method: ship by DHL, UPS, FedEx...

Jeudi 03 mars 2016

Appearance White Paste 170~300 (1/10mm, 25℃) Specific Gravity 3.0~3.4 Oil Separation ≤1.0 (%) (200℃, 8h) Volatile ≤1.0 (%) (200℃，8h) Breakdown Voltage Strength ≥10 (kv/mm) Volume Resistivity ≥3×1014(Ω·CM) Thermal Conductivity 1.0-1.2 (w/m.k) 1 kg/tank,10kg/barrel...

Jeudi 03 mars 2016

Appearance White Paste 170~300 (1/10mm, 25℃) Specific Gravity 3.0~3.4 Oil Separation ≤1.0 (%) (200℃, 8h) Volatile ≤1.0 (%) (200℃，8h) Breakdown Voltage Strength ≥10 (kv/mm) Volume Resistivity ≥3×1014(Ω·CM) Thermal Conductivity 1.0-1.2 (w/m.k) 1 kg/tank,10kg/barrel...

Jeudi 03 mars 2016

Appearance White Paste 170~300 (1/10mm, 25℃) Specific Gravity 3.0~3.4 Oil Separation ≤1.0 (%) (200℃, 8h) Volatile ≤1.0 (%) (200℃，8h) Breakdown Voltage Strength ≥10 (kv/mm) Volume Resistivity ≥3×1014(Ω·CM) Thermal Conductivity 1.0-1.2 (w/m.k) 1 kg/tank,10kg/barrel...

Jeudi 03 mars 2016

Quantité : as request - Prix : 4580USD

Manufacturing Wire Rope Annealing Machine For 12-50MM Annealing machines heat wire rope with an electrical current that enables the rope to be twisted and separated. The result is a round end that does not splay and can be easily inserted into fittings. Specifications Burn out...

Mardi 01 mars 2016

Quantité : 1 - Prix : 1,00 €

Weibao Board is a reliable substrate to receive heavy decorative finishes, such as marble or stone tiles. The board is manufactured to ISO 9001 quality management system and ISO14001 environmental management system, and has obtained the Green Product Label Award issued by National...

Mardi 01 mars 2016

Quantité : 1 - Prix : 1,00 €

WeatherPlank is made of WeatherPro-L fibre cement reinforced calcium silicate board, which is produced from a mixture of cement, silica, special cellulose fibres and selected fillers to impart durability, toughness and moisture resistance. It is then cured by an autoclaving process...

Mardi 01 mars 2016

Quantité : 1 - Prix : 1,00 €

Tai'an Board is designed with tongue and groove jointing systems for easy assembly. The panel provides exceptional dimensional stability and an unrivalled resistance to movement due to effects of moisture or heat. When subject to fire attack above 1200oC, the panel wall provides...

Dimanche 28 février 2016

Before The Curing Performance Indicators A B Appearance Gray Fluid White Fluid Viscosity 1500～2500(cps) 1500～2500(cps) A: B 1: 1 Mixed Viscosity 1500～2500(cps) Operable Time 30～120(min) (Adjustable) Curing Time 3～5(h) After The Curing Hardness 40~50(Shore A) Dielectric...

Samedi 27 février 2016

Before The Curing Performance Indicators A B Appearance Gray Fluid White Fluid Viscosity 1500～2500(cps) 1500～2500(cps) A: B 1: 1 Mixed Viscosity 1500～2500(cps) Operable Time 30～120(min) (Adjustable) Curing Time 3～5(h) After The Curing Hardness 40~50(Shore A) Dielectric...

Samedi 27 février 2016

Before The Curing Performance Indicators A B Appearance Gray Fluid White Fluid Viscosity 1500～2500(cps) 1500～2500(cps) A: B 1: 1 Mixed Viscosity 1500～2500(cps) Operable Time 30～120(min) (Adjustable) Curing Time 3～5(h) After The Curing Hardness 40~50(Shore A) Dielectric...