DATA - 9788 Annonces

Mercredi 22 avril 2015

Main technical data of 1450 degree vacuum sintering furnace Model Effective working Dimension (mm) Max temperature (℃) Ultimate pressure (pa) Pressure rising rate(pa/h) Temperature Uniformity(℃) RVSG-6512 600×500×1200 1450 2×10-3 0.5 ±3 RVSG-8312 800×300×1200 1450 2×10-3 0...

Mercredi 22 avril 2015

Main technical data of 1300 degree vacuum sintering furnace Model Effective working Dimension (mm) Max temperature (℃) Ultimate pressure (pa) Pressure rising rate(pa/h) Cooling rate 1100℃-150℃ (min) Temperature Uniformity(℃) RVS-75G 300×250×500 1300 2×10-3 0.5 ≦20 ±3 RVS-100G...

Mardi 21 avril 2015

GW-50 is rebar locator, which non-destructive measurement of concrete cover and rebar diameters , and detect rebar locations by using an electromagnetic induction method . It also can be used to test the distribution of magnetic and conductor such as cables and metal in non-magnetic...

Mardi 21 avril 2015

Quantité : 100 - Prix : USD0.1

2015 newest design USB retractable charging and transmission cable for iphone and Micro USB retractable USB cable Product Features: Material: ABS/TPE(environment material , purified copper wire Current: 2.4A Product specification: cable length 100cm,retractable 140mm*42mm*18mm wire width...)

Mardi 21 avril 2015

Quantité : 100 - Prix : USD0.1

2015 newest design USB retractable charging and transmission cable for iphone and Micro USB retractable USB cable Product Features: Material: ABS/TPE(environment material , purified copper wire Current: 2.4A Product specification: cable length 100cm,retractable 140mm*42mm*18mm wire width...)

Mardi 21 avril 2015

Quantité : 100 - Prix : USD0.1

2015 newest design USB retractable charging and transmission cable for iphone and Micro USB retractable USB cable Product Features: Material: ABS/TPE(environment material , purified copper wire Current: 2.4A Product specification: cable length 100cm,retractable 140mm*42mm*18mm wire width...)

Mardi 21 avril 2015

Quantité : 100 - Prix : USD0.1

2015 newest design USB retractable charging and transmission cable for iphone and Micro USB retractable USB cable Product Features: Material: ABS/TPE(environment material , purified copper wire Current: 2.4A Product specification: cable length 100cm,retractable 140mm*42mm*18mm wire width...)

Mardi 21 avril 2015

Quantité : 100 - Prix : USD0.1

Product Description Low Cost Micro USB Cable for HTC Samsung Specifications 1.Micro USB+Type A 2.Warranty: 1 year 3.Material: PVC 4.Length: 0.5M/1M/1.5M/2M/3M Fetures: 2 in 1 functions: Data Sync & Charging High quality PVC,Aluminum Foil,Mylar Colorful & Vogue Noodle...

Dimanche 19 avril 2015

Quantité : 100 units - Prix : Negotiable

Hitop est un ISO 9001: 2000 certifié fabricant de moules, privée avec une usine ultra-of-the-art production en Chine. Hitop vous donne les avantages de la baisse des coûts couplés aux normes d'ingénierie et de production élevées attendues dans la européen et nord-américain. La...

Samedi 18 avril 2015

Product Parameters: garlic chicken bouillon cube Product Type: Mixed Spices & Seasonings Color: Yellow Type: Chicken Essence / Chicken Bouillon Style: Dried garlic chicken bouillon cube Place of Origin: Jiangsu, China (Mainland) Shape: cube Certification: FDA, HACCP, ISO, QS Grade...

Samedi 18 avril 2015

Specifications HALAL seafood cube 1. Self R&D Central 2. OEM service 3.HALAL, ISO, QS, HAPPC 4.High quality and Functional spices 4Gram NEW ARRIVE AFRICAN BOUILLON SHRIMP SEAFOOD CUBE Product Description Product Name: BOUILLON CUBES, SEASONING CUBE, STOCK CUBE ...

Vendredi 17 avril 2015

Quantité : 100 - Prix : 0,10 €

Colorful micro retractable cable cable length: 120cm data transfer and charging for mobile phone ROHS Localisation : Four Floor, NO#38 Middle Road of Wen tang, Dong Guan city, Guang Dong Province, 523000 Dong Chen, Personne à contacter : Debbie ye, 86 0769 22016706

Jeudi 16 avril 2015

Quantité : 1000 - Prix : 0,10 €

2015 newest design USB retractable charging and transmission cable for iphone and Micro USB retractable USB cable Product Features: Material: ABS/TPE(environment material , purified copper wire Current: 2.4A Product specification: cable length 100cm,retractable 140mm*42mm*18mm wire width...)

Jeudi 16 avril 2015

Quantité : 1000 - Prix : 0,10 €

2015 newest design USB retractable charging and transmission cable for iphone and Micro USB retractable USB cable Product Features: Material: ABS/TPE(environment material , purified copper wire Current: 2.4A Product specification: cable length 100cm,retractable 140mm*42mm*18mm wire width...)

Mercredi 15 avril 2015

Specification: Technical code for testing of building foundation piles JGJ 106-2003 Technical specification of Dynamic pile tests for Highway Engineering JTG/TF81-01-2004 Technical specification for inspection of concrete defects by ultrasonic method CECS21: 2000 Technical specification...

Mercredi 15 avril 2015

Specification Technology specification for inspection of concrete defects by ultrasonic method CECS 21: 2000 Technical specification for detecting strength of concrete by ultrasonic-rebound combine method CECS 02: 2005 Purpose Testing building foundation piles by crosshole ultrasonic...

Mercredi 15 avril 2015

Introduction Pile Integrity Tester With Reflection Wave Method is an intelligent and portable analyzer for pile foundation detection with such capabilities as signal acquisition, data analysis and processing, and storage and output of results. This instrument mainly uses a reflected...

Mercredi 15 avril 2015

Purpose SYR51+ rebar Location system is used to test rebar diameter, distribution, coating thickness in concrete. Specification JGJ/T152-2008 Performance Longer service life of the Connector Clip: The instrument has long service life because of using Lemo Connector Clip which...

Mercredi 15 avril 2015

Executive Standard: NT BUILD 492(Chloride Migration Coefficient from Non -Steady - State Migration Experiments) EU – Project CHLORTEST G6RD -CT – 2002 – 00855 CEN TC 51(CEN TC 104)/WG12/TG5 Guide to Durability design ad Construction of Concrete Structures (CCES-01-2004) Detection method...

Mercredi 15 avril 2015

Executive Standard: Standard for test methods of long-term performance and durability of ordinary concrete（GB/T50082-2009） The Provisional Technical conditions of Passenger special line high-performance concrete Corrosion prevention technical specification for concrete structure...

Mercredi 15 avril 2015

Quantité : 100 units - Prix : Negotiable

Mold Manufacturing -Equipped with the large capacity of up-to-date machine tools including vertical gantry CNC machinin g-centers, double-head EDM machine tools and spotting presses. -Capable of making big molds with maximum weight 30T -Experienced with low pressure injection...

Mercredi 15 avril 2015

Quantité : 100 units - Prix : Negotiable

Mold Manufacturing -Equipped with the large capacity of up-to-date machine tools including vertical gantry CNC machinin g-centers, double-head EDM machine tools and spotting presses. -Capable of making big molds with maximum weight 30T -Experienced with low pressure injection...

Mercredi 15 avril 2015

Quantité : 100 units - Prix : Negotiable

Mold Manufacturing -Equipped with the large capacity of up-to-date machine tools including vertical gantry CNC machinin g-centers, double-head EDM machine tools and spotting presses. -Capable of making big molds with maximum weight 30T -Experienced with low pressure injection...

Mercredi 15 avril 2015

Quantité : 100 units - Prix : Negotiable

Mold Manufacturing -Equipped with the large capacity of up-to-date machine tools including vertical gantry CNC machinin g-centers, double-head EDM machine tools and spotting presses. -Capable of making big molds with maximum weight 30T -Experienced with low pressure injection...

Mercredi 15 avril 2015

Quantité : 100 units - Prix : Negotiable

Mold Manufacturing -Equipped with the large capacity of up-to-date machine tools including vertical gantry CNC machinin g-centers, double-head EDM machine tools and spotting presses. -Capable of making big molds with maximum weight 30T -Experienced with low pressure injection...

Mercredi 15 avril 2015

Quantité : 100 units - Prix : Negotiable

Mold Manufacturing -Equipped with the large capacity of up-to-date machine tools including vertical gantry CNC machinin g-centers, double-head EDM machine tools and spotting presses. -Capable of making big molds with maximum weight 30T -Experienced with low pressure injection...

Mercredi 15 avril 2015

Quantité : 100 units - Prix : Negotiable

Mold Manufacturing -Equipped with the large capacity of up-to-date machine tools including vertical gantry CNC machinin g-centers, double-head EDM machine tools and spotting presses. -Capable of making big molds with maximum weight 30T -Experienced with low pressure injection...

Mercredi 15 avril 2015

Quantité : 100 units - Prix : Negotiable

Mold Manufacturing -Equipped with the large capacity of up-to-date machine tools including vertical gantry CNC machinin g-centers, double-head EDM machine tools and spotting presses. -Capable of making big molds with maximum weight 30T -Experienced with low pressure injection...

Mercredi 15 avril 2015

Quantité : 100 units - Prix : Negotiable

Mold Manufacturing -Equipped with the large capacity of up-to-date machine tools including vertical gantry CNC machinin g-centers, double-head EDM machine tools and spotting presses. -Capable of making big molds with maximum weight 30T -Experienced with low pressure injection...

Mercredi 15 avril 2015

Quantité : 100 molds - Prix : Negotiable

Mold Manufacturing -Equipped with the large capacity of up-to-date machine tools including vertical gantry CNC machinin g-centers, double-head EDM machine tools and spotting presses. -Capable of making big molds with maximum weight 30T -Experienced with low pressure injection...