POLYAMIDE - 323 Annonces

Samedi 03 février 2024

Polyimide Tape Polyimide tape is made of polyimide film and coated with high-temperature resistant silicone adhesive on one side or both sides. The thickness of the single-sided polyimide tape is generally 50um, and the thickness of the double-sided polyimide tape is 100um. As a...

Samedi 03 février 2024

FUXI ® ANTISTATIC PAINT The anti static coating for metal is used for the inner wall of the oil tank. The basic function is to protect the steel oil tank from corrosion, protect the oil from pollution, and prevent static electricity. Epoxy resin is the base material, It is composed...

Jeudi 01 février 2024

Quantité : 1-50 tons - Prix : 1.7-3.5 usd/kg

Polyamide hot melt glue refers to a type of adhesive that is based on polyamide resins and is designed to be applied in a molten state. Polyamide based hot melt adhesives are thermoplastic materials that are applied in a molten state and solidify upon cooling to form a strong bond...

Jeudi 01 février 2024

Quantité : 1-50 tons - Prix : 1.7-3.5 usd/kg

Edge Folding Glue Product Fold edge bonding, temporary fixation before threading, fast hardening keeps the shape of fold edge shape good, polyamide hot glue is workable for different types of fold machine, no sticky needle during fast threading, good positioning. Edge Folding Glue...

Vendredi 19 janvier 2024

In order to protect our earth for survival, to reduce the use of non-renewable resources and eliminate adverse environmental effects in the process of production, the use of renewable fiber is being paid more and more attention by people. Now basically recycled polyester, recycled cotton...

Vendredi 05 janvier 2024

pa12gf is an ideal material for many industries, including Injection Molding. The powder has been tested for use on Eplus3D's SLS 3D printers. Eplus3D also offers a wide range of validated processes for the above materials to ensure that the performance of the 3D printed parts is fully met...

Vendredi 05 janvier 2024

Polyamide 12 is an ideal material for many industries, including Injection Molding. These powders have been tested for use on Eplus3D's SLS 3D printers. Eplus3D also offers a wide range of validated processes for the above PA12 3D printing materials to ensure that the performance...

Vendredi 05 janvier 2024

PA11 powder is an ideal material for many industries, including Injection Molding. The powder has been tested for use on Eplus3D's SLS 3D printers. Eplus3D also offers a wide range of validated processes for the above materials to ensure that the performance of the 3D printed parts are fully met...

Vendredi 05 janvier 2024

PA6 GF15 with high tensile strength is made by 15% glass fiber reinforced, toughened, polyamide 6 resin for injection molding. Typical Application of PA6 GF15 with high tensile strength (A1307C) PA6 with 15% glass fiber toughened plastics, due to its excellent properties, good appearance...

Mercredi 03 janvier 2024

PTFE machined parts are custom-made components manufactured from polytetrafluoroethylene material. These parts are created through machining processes that involve cutting, drilling, and shaping PTFE plastic to meet specific design requirements. Machined PTFE parts offer outstanding...

Mercredi 03 janvier 2024

Polytetrafluoroethylene film is made of PTFE resin by molding, sintering, cooling into blank, then by turning, calendering. The ptfe thin film made by turning is a non-oriented film, which becomes a oriented film after calendering. The non-oriented film is semi-oriented film by calendering 1...

Samedi 02 décembre 2023

Quantité : 1-50 tons - Prix : 1.7-3.5 usd/kg

Hangzhou Renhe Hot Melt Adhesive Co., LTD is a well-known hot melt adhesive china manufacturer since 2000. We provide professional services and economic hot melt glue of over 500 types to over 50 countries and regions, including Southeast Asia, India, North & South America, Europe and so on...

Mercredi 29 novembre 2023

Polyamide 66, reinforced with 30% of glass fiber, heat stabilized, forinjection moulding. PA6 6 GF30 is a common nylon material known for its high strength and durability, as well as provides enhanced mechanical properties. The glass fiber reinforcement of PA66 30 GF plastic improves...

Mercredi 29 novembre 2023

Material PA 66 GF 30 FR is a PA66 with 30% glass-fibers and flame retardant free of halogens. This type of polyamide PA66 contains stabilization and is optimized to use in electronic and electric applications. If you are interested, contact us now to get more information about Nylon...

Mercredi 29 novembre 2023

PA6 6GF15 is a 15% glass fiber reinforced, toughened, polyamide 66 resin for injection molding Typical Application of Anmei Group PA66 GF15 With High Tensile Strength (A2307C) PA66 15% glass fiber and high toughness modified grades are applied to the sectors of electrical switch with...

Vendredi 10 novembre 2023

Since our strength is grip socks, our baby socks well kept this advantage. Baby cozy socks fall off easily during all crawling, napping, and playing. Elasticity at the ankle ensures that our child socks are retained during playing, and a non-slip application on the sole helps prevent slipping...

Jeudi 26 octobre 2023

As an important material, enameled copper wire is a main variety of winding wire, which consists of conductor and insulating layer. After the bare copper wire is softened by annealing, it is painted and baked many times. It has been widely used in the motors, transformers, compressors...

Mardi 10 octobre 2023

Quantité : 700 tons/y - Prix : $4-10/kg

PTFE Slide Bearing Plates The product is made of PTFE suspended fine powder resin, cold pressed into billet, sintering forming, pressing grease groove, machined into various specifications of sliding block. Has very high compressive strength, low friction coefficient, excellent...

Mardi 10 octobre 2023

Quantité : 700 tons/y - Prix : $4-10/kg

PTFE O Ring PTFE sealing products not only can seal oil fluid, can also seal water a class of fluids, including strong acid, strong alkali, strong corrosion strong chemical fluids and a variety of solvents, it can also seal a variety of gases, to adapt to dry friction occasions...

Mardi 26 septembre 2023

PA66 GF 15 Heat Stabilized (A2006C, A2016C) for Engineering PlasticsPA 66 GF 15 is a 15% glass fiber reinforced, heat-resistance, polyamide 66 resin for injection molding.Anmei PA66 GF15 Storage and Handling PRE-PROCESSING： Pre-drying: 4-6h / 130°C Processing: Melting temperature...

Mardi 26 septembre 2023

Anmei focuses on the production of modified engineering plastics. We have polyamide PA66 modified products with properties of heat-resistant, reinforced, toughened, flame-retardant, wear-resistant, weather-resistant, oil-resistant and conductive. According to the characteristics of your product...

Mardi 26 septembre 2023

Why Nylon Has High Tensile Strength Nylon 66 Pa66 With High Tensile Strength (A2307X01, A2317X01) for Engineering PlasticsUsing Polyamide 66 as the basic resin, the nylon 66 tensile strength is obtained by blending and modifying with the addition of a toughening agent. The flexural strength...

Mardi 26 septembre 2023

Nylon66 PA66 Heat Stabilized Description Nylon66 PA66 Heat Stabilized a high temperature nylon made by the polycondensation of terephthalic acid and hexamethylene diamine. Heat stabilized nylon 6 has the properties of low water absorption, excellent heat resistance, goodprocessing fluidity...

Mercredi 06 septembre 2023

Prix : USD 150- 600

The organic membrane is a material having a selective separation function, and when there is a driving force on both sides of the membrane (such as a pressure difference, a concentration difference, a potential difference, etc.), the raw material component selectively permeates the membrane...

Vendredi 01 septembre 2023

Prix : 0.1-1USD

Custom Ankle ankle socks suppliers Sporty ankle length socks are comfortable, and their design literally means they can run around. Ankle cut socks can be worn with formal, casual or sportswear. This is the versatility of low ankle socks, which is why it is preferred! It is also easy...

Jeudi 24 août 2023

Spherical Roller Bearings Self-aligning roller bearings can adapt to the severe environment and working condition, are mainly designed to bear very heavy radial loads and heavy axial loads, have extremely high impact load resistance, and can realize full-capacity load through self-aligning...

Mercredi 23 août 2023

3D printed nylon parts can be used for product verification or directly used as functional products. The product is 3d prototype printing with light weight and shorter production cycle. It has great application space in automobile, aerospace, art creation, medical treatment and other fields...

Vendredi 14 juillet 2023

PA6 GF 20 has 20% glass fiber filler. It has much greater heat-resistant mechanical properties than unfilled polyamide. Anmeiplastics has always been producing reliable PA6 GF20 products for many years. We can provide you with the best chemical material. If you need high-quality PA6 GF20...

Vendredi 14 juillet 2023

PA6 15GF with high tensile strength is made by 15% glass fiber reinforced, toughened, polyamide 6 resin for injection molding. Typical Application of PA6 GF15 with high tensile strength (A1307C) PA6 with 15% glass fiber toughened plastics, due to its excellent properties, good appearance...

Vendredi 14 juillet 2023

What Is PA6 ? As an engineered plastics company, Anmei focuses on the production of modified engineering plastics, among which high-performance nylon 6 engineering plastics are one of our main products. We have nylon 6 modified plastics of heat-resistant, reinforced, toughened, flame-retardant...