A|GRADE - 11273 Annonces

Vendredi 11 mars 2016

Quantité : 2000 - Prix : USD 6.5

Localisation : Floor 2-3,NO.80 Baoshi East Road,Shiyan Street,Bao'an District,Shenzhen,Guangdong,China, 518109 Shiyan, Personne à contacter : Cherry liu, 0755 27526671

Vendredi 11 mars 2016

Prix : FOB USD 80/square me

High Speed Corugator Belt is developed to high speed running and rapid dying of the corrugated board.The structure and the quality of the belt facilitates steam evaporation from the papeerboard. Advantages: high grade material,safety packing to protect,high durability,maximum flexibility...

Jeudi 10 mars 2016

Introduction: JL-X waterproof test system is according to IEC60529, IEC60598, IEC60335 and IEC 60034-5: 2000. The JL-X includes the following test grades: IPX1, IPX2, IPX3, IPX4, IPX5, IPX6, IPX7 and IPX8 (Refer to page 51 of IEC60529). It is widely used in the authentication test...

Jeudi 10 mars 2016

Before The Curing Appearance White Paste Tack Free Time ≤10 (min) Extrudability 5~11 (g/s，25℃) Cure Time 3～7(d) After the curing Relative Density 1.40～1.45 (g/cm3) Tensile Strength ≥2.5 (MPa) Break Elongation ≥500 (%) Shear Strength ≥2.0 (MPa) Hardness 45～55 (Shore...)

Jeudi 10 mars 2016

Before The Curing Appearance White Paste Tack Free Time ≤10 (min) Extrudability 5~11 (g/s，25℃) Cure Time 3～7(d) After the curing Relative Density 1.40～1.45 (g/cm3) Tensile Strength ≥2.5 (MPa) Break Elongation ≥500 (%) Shear Strength ≥2.0 (MPa) Hardness 45～55 (Shore...)

Jeudi 10 mars 2016

Before The Curing Appearance White Paste Tack Free Time ≤10 (min) Extrudability 5~11 (g/s，25℃) Cure Time 3～7(d) After the curing Relative Density 1.40～1.45 (g/cm3) Tensile Strength ≥2.5 (MPa) Break Elongation ≥500 (%) Shear Strength ≥2.0 (MPa) Hardness 45～55 (Shore...)

Mercredi 09 mars 2016

Twin Ring Wire Quality and cost control: 1. Manufacture start from nylon coated book binding wire, wire forming machinery and twin ring wire; 2. According the product serial number can tracking the entire production action; 3. Product inspection, workers, equipment manager is responsible...

Mercredi 09 mars 2016

Quantité : 100000 - Prix : 9-10/meter

Yarn Count: 20*16 Material: 100% Cotton Width: 57/58" Weight: 260gsm Model Number: Ysetex Color: all coolor is available Color fastness: 4-5 Grade Formaldehyde content：Less than 300ppm or 75ppm according to customer's requirements Char length ：Less than 100mm After glow Less...

Mercredi 09 mars 2016

Quantité : 100000 met - Prix : 12-16/piece

Yarn Count: 7*7 20*16 21*21 32*32 Material: 100% Cotton Width: 57/58" Weight: 420-170gsm Model Number: Ysetex Color: all coolor is available Color fastness: 4-5 Grade Formaldehyde content：Less than 300ppm or 75ppm according to customer's requirements Char length ：Less than...

Mercredi 09 mars 2016

Prix : USD11.5-12.5/kilogra

Color fastness: 4-5 Grade Formaldehyde content：Less than 300ppm or 75ppm according to customer's requirements Char length ：Less than 100mm After glow Less than 2s After flame ：Less than 2s Durable ：At least 50 times washing Shrinkage： Less than ±3% after 5 times washing in 60°C...

Mercredi 09 mars 2016

Quantité : 100000 - Prix : USD12-13/meter

Color fastness: 4-5 Grade Formaldehyde content：Less than 300ppm or 75ppm according to customer's requirements Char length ：Less than 100mm After glow Less than 2s After flame ：Less than 2s Durable ：At least 50 times washing Shrinkage： Less than ±3% after 5 times washing in 60°C...

Mardi 08 mars 2016

Quantité : as your qu - Prix : $0.1-0.5

Standards FDA,CE,ISO14001,ISO13485,ISO9001 Qualities: Medical grade quality Highly absorbent capacity Highly releasing more than 95% Soft smooth tip and nylon fibers Handle with breakpoint Huaman DNA-free/Rnase-free Desicripe: The perpendicular nylon fibers act like a soft brush...

Lundi 07 mars 2016

Quantité : 60T/MONTH - Prix : 9.2 USD/KG FOB HUANG

1.description Insoles silicone is great to make silicone insoles and relative foot health care, such as forefoot pain, heel lifts, insoles, foot orthotics, arch supports, heel cushions and pads ect. it Is a medical grade silicone that resist to bacterial growth and does not dry out...

Lundi 07 mars 2016

Quantité : 60T/MONTH - Prix : 8.2 USD/KG FOB HUANG

1.description Platinum Cure Molding Silicone is a two parts kinds liquid silicone, which can cured on room temperature. which mainly used for mold making of concrete, stone , jewelry casting,, tire molding ,rapid protyping , vacuum foaming, any condensation silicone can used for...

Samedi 05 mars 2016

Quantité : 25mt - Prix : 9.5€ to 10€

Voici les pistaches Fandoghi 30/32. Item Grade Size Unit Price Currency 1 1 Pistachio Kgs 9.5 Euro EXW Race : Fandoqi size : 30-32 Localisation : 2, Chahar divari, 93201 Tehran, Personne à contacter : Nader sherafat, +33 7 62 58 79 19

Samedi 05 mars 2016

Quantité : MOQ 1000 M - Prix : 0.1-3USD

Features and Benefits: 1.Light weight,durable,resistance to acid and alkali,aging resistant,corrosion resistant. 2.High tensile strength and bending properties,which make it go through narrow easily. 3.Perfect temperature adaptability,the product will not soften in hot weather...

Samedi 05 mars 2016

Quantité : MOQ 1000 M - Prix : 0.1-3USD

Duct rodder are composed of fiber glass rod which is extruded by fiber glass and high strength resin at high temperature. This type of rod has high tensile strength and flexibility. It was covered by a high density polyethylene engineering plastic as its protect layer,which make...

Samedi 05 mars 2016

Quantité : MOQ 1000 M - Prix : 0.1-3 usd

Duct rodder are composed of fiber glass rod which is extruded by fiber glass and high strength resin at high temperature. This type of rod has high tensile strength and flexibility. It was covered by a high density polyethylene engineering plastic as its protect layer,which make...

Samedi 05 mars 2016

Quantité : MOQ 1000 m - Prix : 0.1-3USD

Duct rodder are composed of fiber glass rod which is extruded by fiber glass and high strength resin at high temperature. This type of rod has high tensile strength and flexibility. It was covered by a high density polyethylene engineering plastic as its protect layer,which make...

Samedi 05 mars 2016

Quantité : MOQ 1000 m - Prix : 0.1-3USD

Features and Benefits: 1.Light weight,durable,resistance to acid and alkali,aging resistant,corrosion resistant. 2.High tensile strength and bending properties,which make it go through narrow easily. 3.Perfect temperature adaptability,the product will not soften in hot weather...

Samedi 05 mars 2016

Quantité : MOQ 1000 M - Prix : 0.1-3USD

Features and Benefits: 1.Light weight,durable,resistance to acid and alkali,aging resistant,corrosion resistant. 2.High tensile strength and bending properties,which make it go through narrow easily. 3.Perfect temperature adaptability,the product will not soften in hot weather...

Samedi 05 mars 2016

Quantité : MOQ 1000 M - Prix : 0.1-3USD

Duct rodder are composed of fiber glass rod which is extruded by fiber glass and high strength resin at high temperature. This type of rod has high tensile strength and flexibility. It was covered by a high density polyethylene engineering plastic as its protect layer,which make...

Samedi 05 mars 2016

Quantité : MOQ 1000 m - Prix : 0.1-3USD

Duct rodder are composed of fiber glass rod which is extruded by fiber glass and high strength resin at high temperature. This type of rod has high tensile strength and flexibility. It was covered by a high density polyethylene engineering plastic as its protect layer,which make...

Samedi 05 mars 2016

Quantité : MOQ 1000 m - Prix : 0.1-3USD

Duct rodder are composed of fiber glass rod which is extruded by fiber glass and high strength resin at high temperature. This type of rod has high tensile strength and flexibility. It was covered by a high density polyethylene engineering plastic as its protect layer,which make...

Samedi 05 mars 2016

Quantité : MOQ 1000 M - Prix : 0.1-3USD

Duct rodder are composed of fiber glass rod which is extruded by fiber glass and high strength resin at high temperature. This type of rod has high tensile strength and flexibility. It was covered by a high density polyethylene engineering plastic as its protect layer,which make...

Samedi 05 mars 2016

Quantité : MOQ 1000 m - Prix : 0.1-3USD

Features and Benefits: 1.Light weight,durable,resistance to acid and alkali,aging resistant,corrosion resistant. 2.High tensile strength and bending properties,which make it go through narrow easily. 3.Perfect temperature adaptability,the product will not soften in hot weather...

Samedi 05 mars 2016

Quantité : MOQ 1000 m - Prix : 0.1-3USD

Duct rodder are composed of fiber glass rod which is extruded by fiber glass and high strength resin at high temperature. This type of rod has high tensile strength and flexibility. It was covered by a high density polyethylene engineering plastic as its protect layer,which make...

Samedi 05 mars 2016

Quantité : MOQ 1000 m - Prix : 0.1-3USD

Features and Benefits: 1.Light weight,durable,resistance to acid and alkali,aging resistant,corrosion resistant. 2.High tensile strength and bending properties,which make it go through narrow easily. 3.Perfect temperature adaptability,the product will not soften in hot weather...

Samedi 05 mars 2016

Quantité : MOQ 1000 M - Prix : 0.1-3 usd

Duct rodder are composed of fiber glass rod which is extruded by fiber glass and high strength resin at high temperature. This type of rod has high tensile strength and flexibility. It was covered by a high density polyethylene engineering plastic as its protect layer,which make...

Samedi 05 mars 2016

Quantité : MOQ 1000 M - Prix : 0.1-3 usd

Duct rodder are composed of fiber glass rod which is extruded by fiber glass and high strength resin at high temperature. This type of rod has high tensile strength and flexibility. It was covered by a high density polyethylene engineering plastic as its protect layer,which make...