HAMMER - 1067 Annonces

Vendredi 24 novembre 2017

- Check Valve - 1. Size: 2"~36" 2. Connection: ASME B16.10 3. Certifications: API600, BS1868 4. Standard: DIN GB ISO JIS ANSI 5. Material: WCB,CF8M,CF8,CF3,CF3M 6. Working Pressure: Class150LB~Class2500LB 7. Flanged End: ≤24" to ASME B16.5, ≥26" to ASME B16.47 Series A 8. Short...

Samedi 04 novembre 2017

The instrument is used to test the pilling conditions of wool fabric, chemical fiber cotton, and blended, knitted, woven fabric to identify product quality and process effect. When testing, the fabric is rubbed against nylon brush and abrasive, or rubbed against abrasive only in the...

Mercredi 18 octobre 2017

Specifications. Pressure Rating: 1.6- 4.0Mpa Specification: Screwed: DN15-50, Flanged: DN15-50 Material: cast steel Standard flanges: DIN, ANSI, JIS; Standard screwed: NPT BSP Performance / Advantages: Adopt imported material as its hot sensitive element, and so it is high sensitivity...

Mercredi 18 octobre 2017

Brief Introduction. TD42 Steam Trap is a kind of thermodynamic steam trap which is mainly used for the environment with low condensate back pressure and low capacity requirement, similar to Spirax Sarco Design. Structural Characteristic. 1.Assembled with steam or air heat preservation...

Mercredi 18 octobre 2017

Introduction Impulse safety valve is used for power plant boilers, pressure containers, pressure and temperature reducing device and other facilities. It serves to prevent the pressure exceeding the highest allowable pressure value and ensure the safety of the device when working...

Mardi 17 octobre 2017

Brief Introduction: The test machine complies with UL817 and other relevant standards "special rubber fixed to the machine friction rub hammer surface to a certain load and frequency requirements for safe use of the provisions" applicable to manufacturers and quality control departments...

Samedi 30 septembre 2017

Product Description Introdution<! -- span--> Forging is a manufacturing process involving the shaping of metal using localized compressive forces. The blows are delivered with a hammer (often a power hammer) or a die. Forging is often classified according to the temperature...

Samedi 23 septembre 2017

Brief Introduction: The test machine complies with UL817 and other relevant standards "special rubber fixed to the machine friction rub hammer surface to a certain load and frequency requirements for safe use of the provisions" applicable to manufacturers and quality control departments...

Jeudi 14 septembre 2017

Yarn Length Measurement Meter Standards： FZ/T 70001-2003，FZ/T 71004-2003 Scope: Used for measuring the cycle length of a variety of knitting wool, knitting wool circle. For checking that if the length of various linear density (count) hank girth compliance with standards. Product details...

Mardi 05 septembre 2017

Stone hammer blow testing instrument mainly simulates the actual driving condition of the vehicle, and the individual parts of the vehicle body are often impacted by heavy objects such as sliding material and pavement gravels. Thus, the products are damaged. The product damage degree...

Vendredi 01 septembre 2017

Introduction ICI pilling and snagging tester is suitable for the snagging performance test of knitted fabrics and woven fabrics in outwear as well as other fabrics easy to snag , especially for chemical fiber filament yarn and its deformation yarn products. It can quickly detect...

Vendredi 01 septembre 2017

Martindale Abrasion And Pilling Tester Testing Standards: ASTM D4970, ISO 12945.2, GB/T 4802.2/13775/21196.1/21196.2, ASTM D4966, ISO 12947, FZ/T 20020, BS 3424-24/5690, ISO 12947.1/12947.2, M&S P17/P19/P19C, NEXT 18/18a/18b, ISO 5470-2, IWTO-40, JIS L1096 8.17.5 Method E, Woolmark...

Samedi 05 août 2017

Quantité : 100 - Prix : $1299

Except the model above we can also provide the other models as follows: Allen-Bradley Soft Starter SMC-50 150-SB1 Allen-Bradley Soft Starter SMC-50 150-SD2 Allen-Bradley Soft Starter SMC-50 150-SB2 Allen-Bradley Soft Starter SMC-50 150-SD3 Allen-Bradley Soft Starter SMC-50 150-SB3...

Vendredi 04 août 2017

Quantité : 1000 - Prix : Negotiable

1.WEG Soft Starter SSW7000 Soft-Starters are static starters that accelerate, decelerate and protect three-phase induction motors. The control of the voltage applied to the motor by means of adjustments to the firing angle of thyristors allows the soft-starter to start and stop...

Jeudi 03 août 2017

Product description: This sampling kit is used for layered river silt or sediment sampling. It can take samples in 3 layers, with the standard sampling depth of 3 m and the minimum sampling depth of about 30 cm. Additional sampling tube is optional for increased sampling depth. Features...

Jeudi 03 août 2017

Product description: QT-TQ0201 basic soil sampling kit is the most commonly used soil sampling kit for many industries, such as soil science, agronomy and architecture. The drill head, with the diameter of 5.72cm, can apply to most of soil types and take soil samples at the depth...

Jeudi 03 août 2017

QT-TQ0401 PR2 probe installation tool kit ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- Product description: QT-TQ0401 PR2 probe installation tool kit can apply to the installation of PR2 soil moisture profile probe. Features Pilot...

Jeudi 03 août 2017

Product description: QT-TQ0402 probe installation tool kit can be used for the installation of plastic transparent access tube (outer diameter 44mm and inner diameter 42mm) of TRIME-PICO-IPH TDR soil moisture profile probe. Features Come with Dutch Eijkelkamp 34mm spiral soil auger...

Mercredi 02 août 2017

Product description: QT-TQ1301manual soil sampling kit is the most commonly used soil sampling kit for many industries, such as soil science, agronomy and architecture. It can apply to undisturbed and disturbed soil sampling in most of soil types. Features: Sampler is easy to use...

Mardi 01 août 2017

http://www.channeleco.com/en/ http://www.channeleco.com/en/Item/Show.asp?m=1&d=1205 Product description: QT-TQ0301 intact root sampling drill kit can be used to collect up to 15 cm of intact soil samples. There is a replaceable serrated crown at the bottom of the drill, however...

Mardi 01 août 2017

http://www.channeleco.com/en/ http://www.channeleco.com/en/Item/Show.asp?m=1&d=1206 Product description: QT-TQ0302 intact root sampling drill kit can be used to collect up to 15 cm of intact soil samples. There is a replaceable serrated crown at the bottom of the drill, however...

Mardi 01 août 2017

http://www.channeleco.com/en/ http://www.channeleco.com/en/Item/Show.asp?m=1&d=1208 Product description: Double ring infiltrometer is a simple device used to measure the rate of water infiltration into soil. Water infiltration rate is the water flows into a unit cross section...

Vendredi 14 juillet 2017

Characteristics: - Single-spindle drive and control; and winding parameters may be adjusted for single spindle - Length can be fixed electronically, and uniform weight is for winding - The device may detect broken yarn in an electronic way - Heavy-hammer grid-shape tension control...

Vendredi 16 juin 2017

Quantité : 1 - Prix : $850

Input Voltage: 220V Working Power: 180W Dimension: 960*600*1330 1.Plate case and high quality wuba head. 2.Cute design and wonderful music attact many fans. 3.With 8 multicolored flashing holes. 4.Suitable for game park, family fun center and other entertainment purposes. Localisation : No...

Samedi 03 juin 2017

Quantité : 10 - Prix : Negotiable

Rock toolsInclude drill bit,drill rods and other accessories. Drill rodsIs to transfer percussive impact power from rock drill drifter hammer to drill bits,then crushing rock for drilling blasting. Bore hole, drill rod length decide the depth of drill hole, and bit diameter decide...

Samedi 03 juin 2017

Quantité : 5 - Prix : Negotiable

Pneumatic DTH hammer Rock drilling is a complicated and difficult work, especially high strength rock drilling to cause much difficulty for a constructor, so you must have a high efficient and durable drill digging tools to cooperate with. the simple structure and unique design...

Jeudi 25 mai 2017

Rubber Soles Bicomponent Adhesive The NEOPRENE ATT is a plychloroprene bicomponent adhesive with high crystallization used for RUBBER SOLES for application of NATURAL RUBBERS.High bond strenght. It is also used for general processing of the shoe. It must be used with a 5% of ACTIVATOR...

Jeudi 25 mai 2017

Transparent Adhesive for inner Soles - Footwear Adhesives The NEOPRENE 3S is a plychloroprene transparent adhesive with strong grip , medium opend time uesd for sticking sides of the inner soles. Thanks to its peculiar transaparency is especially used for leather goods or by leather company...

Jeudi 25 mai 2017

Leather Sole Adhesive The NEOPRENE 1 is a plychloroprene adhesive with high crystallization used for cold sticking of LEATHER SOLES, for the assembly of the GUARDOLO and for the to pair LEATHER-LEATHER and LEATHER-TUNITH. High bond strenght. CHARACTERISTICS : Viscosity : 2800 +/-...

Jeudi 25 mai 2017

NEOPRENE 14 SPRAYING Plychloroprene Adhesive Footwear Adhesive The NEOPRENE 14 SPRAYING is a plychloroprene adhesive used for processing on the division of forniture, sticking of wood - textile and expanded polyurethan. Used for bonding expandeds and quits with difficult materials...