150# - 6081 Annonces

Mercredi 22 avril 2015

Main technical data of of Cycle vacuum induction melting furnace Model Capacity (Kg) Max temperature (℃) Ultimate pressure (Pa) Pressure rising rate (Pa/h) IF power (KW) IF voltage (V) IF frequency (HZ) Dimensions m( L×W×H) RVI-10 10 1850 6×10-3 0.67...

Mercredi 22 avril 2015

Main technical data of of Continuous vacuum induction melting furnace Model Capacity (Kg) Max temperature (℃) Ultimate pressure (Pa) Pressure rising rate (Pa/h) IF power (KW) IF voltage (V) IF frequency (HZ) Cooling water consumption (m3/h) Cooling Water Pressure...

Mercredi 22 avril 2015

Application The stranded aluminum clad steel wires are suitable for the aerial transmission line as overhead ground wire of carrier. They are with low resistance and high strength. Property This kind of products also have four major advantages of excellent corrosion resistance...

Mercredi 22 avril 2015

Application The AACSR conductors are also suitable for use in all practical transmission towers, and other structures. Application ranges from extra high voltage (EHV) transmission lines to sub-service spans at distribution or utilization voltages on private premises as like as ACSR...

Mercredi 22 avril 2015

Application AAAC is used as overhead conductor for primary and secondary distribution. It is designed utilizing a high-strength aluminum alloy to achieve a high strength-to-weight ratio; affords better sag characteristics. Aluminum alloy gives AAAC higher resistance to corrosion than ACSR...

Mercredi 22 avril 2015

Application ACSR is a specific type of high-capacity, high-strength stranded conductor typically used in overhead power lines and as primary and secondary distribution conductor and messenger support. ACSR offers optimal strength for line design. Variable steel core stranding enables...

Mercredi 22 avril 2015

Application The conductors are suitable for use in low, medium and high voltage overhead lines. AAC has seen extensive use in urban areas where spans are usually short but high conductivity is required. The excellent corrosion resistance of aluminium has made AAC a conductor of...

Mercredi 22 avril 2015

Main technical data of 1300 degree vacuum sintering furnace Model Effective working Dimension (mm) Max temperature (℃) Ultimate pressure (pa) Pressure rising rate(pa/h) Cooling rate 1100℃-150℃ (min) Temperature Uniformity(℃) RVS-75G 300×250×500 1300 2×10-3 0.5 ≦20 ±3 RVS-100G...

Mardi 21 avril 2015

Application Covered line Wire is used primarily for overhead secondary distribution lines. It is not an electrically insulated conductor and is treated as bare conductor when installed. The code words as given apply to conventional polyethylene line wire. Property Operation Temperature...

Jeudi 16 avril 2015

Quantité : 1set - Prix : 16800rmb

- Specifications - 1.Compact Structure,Evenly Size,Convenient,Quickness Adjustment; 2.Unique Feeding Hopper and Bypass Device; 3.V Belt Driving. 1. It is special purpose equipment to crumble big pellets into small pellets. It can crumbled pellet into 0.6~ 1.5mm or 1~2.5mm; 2...

Mardi 14 avril 2015

Quantité : 20 tons/da - Prix : 1.98-3.28USD/KG

WDZ150# Glass fiber chopped strand mat Description WDZ150# Fiber chopped strand mat is a kind of non-woven glass fiber reinforced material, which is ma de by chopping glass fiber first, then be settled down non-directional and uniform, adding some powd er or emulsion binder. It...

Mardi 14 avril 2015

Quantité : 100 - Prix : US$ 11.93

Modèle: ob-t8-150-25w La puissance de la source de lumière à del smd2835: 25: Un certain nombre de del: 120 lm / W: 95-110lm Journaliste: > 75 PF: 0,95 Type: T8 (G13) Longueur: 150CM (5 pieds) Blanc chaud: 3000-3500K; blanc naturel: 4000-4500k; blanc pur: 6000-6500K Certificat...

Samedi 11 avril 2015

Prix : US $ 450 - 500

Specificationsfish meal for sale 1.manufacturer price 2.best price 3.protein: 65% fish meal for sale Features Fish contains a variety of nutrients comprise animal tissue, maintain normal metabolism, growth, reproduction is required, has improved the utilization rate of feed...

Vendredi 10 avril 2015

FST800-216 high-temperature pressure transmitter is a silicon MEMS strain gauge sensor which is glass bonded to a stainless steel diaphragm. It avoids influences on product caused by temperature, humidity, mechanical fatigue and medium, thus to improve its longterm stability in the...

Jeudi 09 avril 2015

Quantité : 6000000M/Y - Prix : 0.85 USD

étoffe de doublure ISO9001: en 2008, Oeko-Tex100 de haute qualité et un bon prix. Type de produit: le revêtement et le revêtement Matériau: 30% de viscose et de 70% de fibres de polyester Types de structure de trame Caractéristiques: adhésif, adhésif Procédé d'insertion de trame...

Jeudi 09 avril 2015

Quantité : 20 tons/da - Prix : 1.98-3.28USD/KG

WDZ150# Glass fiber chopped strand mat Description WDZ150# Fiber chopped strand mat is a kind of non-woven glass fiber reinforced material, which is ma de by chopping glass fiber first, then be settled down non-directional and uniform, adding some powd er or emulsion binder. It...

Jeudi 02 avril 2015

According to demand on rock cone crushers of customers, it is developed based on laminated crushing principle and conceptual design of “more crushing and less grinding”; thus this new type of cone crusher – Hydraulic cone crusher is integrated with high wobble frequency, optimal...

Jeudi 02 avril 2015

Quantité : 1set

1. It is special purpose equipment to crumble big pellets into small pellets. It can crumbled pellet into 0.6~ 1.5mm or 1~2.5mm; 2. Compact structure, evenly size, convenient and quickness adjustment; 3. Rolls perform differential rotational speed. Pellets are pressed, sheared and torn...

Dimanche 29 mars 2015

Quantité : 50 - Prix : USD2700-3000/SET

Used truck tyre changer for sale Main Feature 1. The parts of the hydraulic station are qualified imported subassembly. 2. The main motor and its correlative electric parts accord with the CE standard. 3. Lifting arm oil tank has the center support. 4. The movable control support...

Vendredi 27 mars 2015

In all kinds of stone are in use today, it is particularly important to choose suitable crushing machine. And limestone, granite and gravel is most often seen in the life of the stone, only the broken to good use, what method of broken stone, can achieve low power, high efficiency...

Mercredi 25 mars 2015

LED FLOOD LIGHT PLF-1115 24/36W, 330*150*225MM AC85-265V;DC12V/24V FUZHOU POWER ELECTRICAL APPLIANCES CO.,LTD is one of the specialized manufacturers of electrical appliances in China. The enterprise has strong technical force, advanced testing equipment and assembling line. We...

Mercredi 25 mars 2015

LED UNDER-GROUND LIGHT PLU-138 60LED 150*65MM FUZHOU POWER ELECTRICAL APPLIANCES CO.,LTD is one of the specialized manufacturers of electrical app liances in China. The enterprise has strong technical force, advanced testing equipment and assembli ng line. We have a wide range...

Mardi 24 mars 2015

Quantité : 1 sets - Prix : US $ 100,000 - 500,0

- Quick Details - - Condition: New - Application: Pipe - Plastic Processed: PE - Screw Design: Single-screw - Automatic Grade: full automatic - Place of Origin: Jiangsu, China (Mainland) - Brand Name: Acemien - Model Number: PE - Voltage: 380V or custiomized - Power(W)...

Mardi 24 mars 2015

Quantité : 1 sets - Prix : US $ 36,000 - 80,000

- Quick Details - - Condition: New - Application: Profile, window profiles, wide doors, elbowboards - Plastic Processed: WPC - Screw Design: Double-screw - Automatic Grade: Automatic - Place of Origin: Jiangsu, China (Mainland) - Brand Name: Acemien Machinery - Model Number...

Mardi 24 mars 2015

Quantité : 50 sets pe - Prix : Negotiated

high speed CNC beam drilling machine Technical Specification of GSWZ1250/3 1. Size of work piece 1.1 H-Beam: web height H: 150 ~ 1250mm flange width B: 150 ~ 1250mm 1.2 U-Beam: web height H: 150 ~ 1250mm flange width B: 150~800mm 1.3 U-Beam Sparkle edge: 150 ~ 1250mm Narrow edge...

Mardi 24 mars 2015

Quantité : 1 sets - Prix : negotiated

CNC Beam lines for drilling and sawing MODEL SWZ1250 A. Main Composing Parts This machine is composed of mainframe, hydraulic system, feeding conveyor unit & electrical control system etc. B. Product feature of CNC Beam lines for drilling and sawing a) Equipped with three...

Mardi 24 mars 2015

Quantité : 30 sets pe - Prix : Negotiated

CNC Angle drilling machine Technical parameter: Model JX2532F (mm)Angle size 140×140×10-250×250×32 (m) Max. length of Angle 12 or 14 (By customer's request) (kN) Marking force 1000 Marking groups 4 (mm) Dimension of characters 14×19×10 Range of stadia 40-220 (Stepless adjustment)...

Mardi 24 mars 2015

Quantité : 1 Unit - Prix : USD 4500

Model YQB42 pipe bending machine Bending Range mm 6-42mm Max Bending Thick mm 4mm Material AISI 316 TI - ST 37.4 Application Square pipe and steel pipe Diemensions(L*W*H) 680*880*910 mm Weight 100kg Standard Voltage 220V 50HZ 1PH Motor Power 1.5Kw Control Board...

Lundi 23 mars 2015

Quantité : 100 - Prix : negotiation

Hyperhemisphere sapphire dome-Sen Hishi 20 years experience manucture in china Typical Applications: 1 Intelligent High Speed Dome field; 2 High-speed operation of submarine-based optoelectronic devices; 3 rborne optoelectronic devices operating at high speed; 4 High-speed operation...

Lundi 23 mars 2015

Quantité : 100 - Prix : negotiation

sapphire dome windows-Sen Hishi 20 years experience manucture in china The parameter customized as your want Typical Applications: 1 Intelligent High Speed Dome field; 2 High-speed operation of submarine-based optoelectronic devices; 3 rborne optoelectronic devices operating at high speed...