COOLED - 978 Annonces

Mardi 02 août 2022

Prototype molds are rapid processing for the molds. It's totally different from production molds as they can't be used in the long term. As a professional mold maker for over 15 years,Packson can handle all kinds of mold including prototypes. We bring not only high skilled engineering...

Mardi 02 août 2022

Quantité : 9000 - Prix : USD10-USD1000000

Closed circuit cooling tower (also known as an evaporative air cooler or closed cooling tower) is the tubular heat exchanger placed in the tower, through the circulation of air, spray water and circulating water heat exchange to ensure the cooling effect. AUVC not only provides...

Mardi 02 août 2022

Quantité : 9000 - Prix : USD10-USD1000000

What Is A Cooling Tower? The cooling tower is equipment that uses water as a circulating coolant to absorb heat from a system and discharge the cooling tower to the atmosphere to reduce the water temperature. The principle of the industrial cooling tower is using water and air flow...

Samedi 30 juillet 2022

China reflow soldering technology is widely used in the field of electronic manufacturing. The components on the various boards used in our computers are soldered to the circuit board through this process. This PCB china reflow oven machine has a heating circuit inside to heat air or nitrogen...

Jeudi 28 juillet 2022

Prix : 1-10usd

AlNiCo magnets (also called Aluminum-Nickel-Cobalt magnets) are consist of Al (aluminum), Ni (nickel), Co (cobalt), and other elements like Cu (Cooper) and Ti (Titanium), they are part of the permanent magnet family, they are the most versatile magnets available and can be made into...

Jeudi 28 juillet 2022

The electro-hydraulic swing door is opened by the motor and closed by the hydraulic door closer. Its structure and working principle are that the electric motor drives a heavy hydraulic door closer through an oil pump to realize the door opening process, and then the door closer closes the door...

Mardi 19 juillet 2022

The X/Y/Z servo axis adopts the servo motor direct connected precision planetary reducer to drive the large-diameter, high-precision double nut preloaded ball screw. The machine tool guide rail adopts the roller linear rolling guide rail pair. The X-axis and Z-axis adopt the three...

Jeudi 14 juillet 2022

Quantité : 150000 ton - Prix : USD 2500/T to USD 35

Aluminium alloy round bar is frequently used in the transportation, construction and aviation industries due to its excellent strength to weight ratio. In Otalum, we offer a wide range of extruded hollow bar with a variety of alloys, sizes and finishes. Our solid aluminum round bar...

Mercredi 13 juillet 2022

Quantité : 1000sets/ - Prix : $90-$10000

XLNT-3000 3000W Fiber laser cutter chiller is suitable for 3000W fiber laser cutter. XLNT-3000 adopts intelligent dual-temperature dual-control mode, which can cool the fiber laser generator and QBH connector at the same time. It has an ultra-high temperature control accuracy of ±0...

Mercredi 13 juillet 2022

Quantité : 1000sets/ - Prix : $90-$10000

XLNT-1500 1500W fiber water cooler is specially developed and produced to meet the cooling requirements of the 1500W fiber laser machine. XLNT-1500 fiber water chiller provides users with two intelligent temperature control modes: intelligent temperature control and constant temperature control...

Mercredi 13 juillet 2022

Quantité : 1000sets/ - Prix : $90-$10000

XLNT-1000 Fiber chiller cooling system is used to cool 1000W fiber laser machine. The XLNT-1000 fiber water chiller can meet the precise temperature control requirements of fiber cutting machines and other equipment during cutting operations, and the laser chiller temperature control...

Mercredi 13 juillet 2022

Quantité : 1000sets/ - Prix : $90-$10000

Wrc 300 10L TIG welder cooler is a circulating cooling equipment with water tank capacity of 10L and maximum head of water pump of 30m. It is mainly used for cooling argon arc welding equipment. The working principle of wrc 300a is that the water in the high-temperature water tank...

Mercredi 13 juillet 2022

Quantité : 1000sets/ - Prix : $90-$10000

The welding water cooler is a compact, economical, energy-saving and heat-dissipating circulating cooler, which has the characteristics of portability, convenient operation and long service life. It is mainly used to help cool the heating parts of mechanical equipment such as AC and...

Mardi 12 juillet 2022

Quantité : 1 piece - Prix : 2.9$

Quick Details Type: Abrasive Tools Customized support: OEM, ODM, OBM Place of Origin: Henan, China Brand Name: Boreas Usage: Grinding, Polishing Abrasive Grain Sizes: #400-#60000 Product name: Diamond paste/diamond compound Application: Polishing Workpiece Color: Customized Material...

Samedi 09 juillet 2022

The solid state frequency converter adopts a relatively sealed structure, and the protection level can reach IP55. This solid state frequency converter is a high frequency to low frequency converter . The frequency converter application is very extensive. This solid state frequency...

Samedi 09 juillet 2022

Excellent driver board and galvanometer matching to achieve superior speed performance, reduce the first stroke of a character and corner burning phenomenon, strict mirror quality, ensure the requirements of mirror flatness and damage threshold. The galvo scan head produced by Han's...

Jeudi 30 juin 2022

Prix : 100USD

OVERVIEW OF COLD ROLLED STEEL COIL Cold rolled carbon steel coil is a type of steel that has been passed through a rolling mill below its recrystallization temperature from 400℃ to 700℃. Recrystallization of steel is a microstructural phenomenon that is achieved by heating on the...

Jeudi 30 juin 2022

Prix : 100USD

In essence, china cold rolled steel sheet can be regarded as hot rolled steel that has undergone further processing. The hot rolled steel is further processed in cold reduction mills, where the hot rolled steel gets cooled down at room temperature, followed by a series of annealing...

Mercredi 29 juin 2022

Prototype molds are rapid processing for the molds. It's totally different from production molds as they can't be used in the long term. As a professional mold maker for over 15 years,Packson can handle all kinds of mold including prototypes. We bring not only high skilled engineering...

Mercredi 22 juin 2022

Prix : 5000USD-30000USD

What is medical insert molding? Insert molding tooling refers to a molding process in which an integrated product is made by inserting a pre-prepared metal material insert into a mould and then injecting the plastic resin, and the molten material is bonded to the insert, cooled and solidified...

Mardi 21 juin 2022

Quantité : 1000 pcs - Prix : 200-2000

Residential Humidity Control System Nowadays, the standards of people's living are improving, not only to install air-conditioning, floor heating, and better-conditioned homes,but also to install ventilator, dehumidification and other equipment. A person with insights who is more...

Samedi 18 juin 2022

Quantité : 1000 - Prix : talk in detail

The industrial water chiller adopts a shell and tube condenser, which has fast heat conduction and good heat dissipation effect. It can provide ice water at 5~35℃, and the low temperature type can be as low as 3℃ (the temperature difference does not exceed ±1℃), the compressor power...

Samedi 18 juin 2022

Quantité : 1000 - Prix : talk in detail

The water-cooled screw refrigeration unit adopts a shell and tube condenser, which has fast heat conduction and good heat dissipation effect. It can provide ice water at 5~35℃, and the low temperature type can be as low as 3℃ (the temperature difference does not exceed ±1℃), the compressor...

Samedi 18 juin 2022

The hdpe net is a food grade plastic raw material (HDPE) which is heated and melted in an extruder, extruded through a screw, and enters an extra-rotary head with a small hole in the surface of the mold. The molten plastic flows through the pores of the die to form two molten filaments...

Jeudi 16 juin 2022

Quantité : 400 sets/y - Prix : $30000~300000/set

HKY / SKY series two-stage extrusion system: the first stage is HK or SK series high speed and high torque co-rotating twin screw extruder, the second stage is single screw extruder to form a two-stage compound extrusion system. The system combines twin screw high speed, strong mixing...

Jeudi 16 juin 2022

General introduction ofS11 Type 10kv Distribution Transformer S11 power transformer is in development at S9 series transformer.It is in low loss, low noise, capable of short-circuit, good impact resistance and Well-run performance. It applies new type insulation structure and improves...

Jeudi 16 juin 2022

This machine developed by Kailite company plastic pipe production line manufacturers is featured of unique structure, a high degree of automatic, easy operation and stable reliable continuous manufacture performance can meet all kinds of plastic pipe production needs. How to Extrude PVC Pipe? 1...

Mardi 14 juin 2022

Quantité : 150000 ton - Prix : USD 2500/T to USD 35

Description of Hot Rolled Steel Coil Hot rolling is a mill process that involves rolling the steel at a high temperature (typically at a temperature over 1700° F), which is above the steel's recrystallization temperature. When steel is above the recrystallization temperature, it can...

Mardi 14 juin 2022

As one of the professional oil immersed transformer manufacturers, our oil immersed power transformer is specially developed and designed based on the advanced technology abroad for rough mountainous topography and transportation difficulties to meet the requirement of China oil type...

Mardi 14 juin 2022

With more than 20 years of experience in the injection molding industry and equipped with ISO Class 8 Clean Room, Packson plastic injection moulding factory offers Medical Contract Plastic &Rubber Injection Molding, Custom Injection Molding, Insert Molding and Over Molding by...