APPLIED - 5914 Annonces

Jeudi 29 septembre 2016

Quantité : 1000sets/Y

Tracking Index Test Apparatus 1. Introduction The tracking index test apparatus is designed according to IEC60112, UL746A, GB.T4207, gb4706.1 and TMD 3628-92. It is applied to evaluate the leakage resistance (CT1 and PT2) of the surface of insulating material. Tracking index test...

Jeudi 29 septembre 2016

Quantité : 1000sets/y

Salt Spray Test Chamber Salt spray test chamber is applied to measure the reliability of the EUT against salt-spray corrosion. Salt spray chamber is to simulate the climate near the sea, there are two kinds of test according to different standards (JIS, ASTM, CNS, GB), neutral salt...

Jeudi 29 septembre 2016

Quantité : 1000sets/y

Simulation Transport Vibration Testing Machine (PG-120) Simulation transport vibration testing machine is applied to test the anti viberation ability in transit, and it is widely used in the industries of electronics, motor, lighting fixture, package, toy and etc. This equipment...

Jeudi 29 septembre 2016

Quantité : 1000sets/y

IEC61032 Tumbling barrel test machine 1. Introduction The TB series tumbling barrel test machine meets the requirements of GB2099.1-2008 clause 24.2, GB2423.8, GB7000, GB13140, VDE0620, IEC68-2-32, BS1363.1, EN50075, UL60730 and etc., tumbling barrel test machine is applied to...

Jeudi 29 septembre 2016

Quantité : 1set - Prix : USD3300

ZRS-2 Glow-Wire Test Apparatus - Introduction The equipment is designed according to IEC60695-2-10, UL746 and GB/T5169.10. The specific material and sharp heating wire is heated to specific temperature (550 ℃~960 ℃) for 1 min by max current, then vertical burns the EUT with certain...

Mercredi 28 septembre 2016

Quantité : 1000000 - Prix : 1000~60000

API PDC Diamond Bit/PDC Cutter Bit/PDC Blades Bit for Oil Drilling 1-Product Specification: Number of Blade: Primary Cutter Type: PDC Primary Cutter Size(mm): 13 Nozzle Qty/Type: ND Junk Slot(in^2): 29.8 Gauge Length: 3” Connection Size/Type: 6-5/8” API REG Operating Parameters...

Dimanche 25 septembre 2016

Prix : 0.1-1usd/meter

Fiberglass duct rodder is an auxiliary tool applied in towing lead-rope through a pipe. The rod surface is hard and smooth, so it can get through the narrow pipe or channel easily.The inner core of the rod is made of fiberglass and unsaturated polyester resin. The outside layer...

Dimanche 25 septembre 2016

Prix : 0.1-1usd/meter

Fiberglass duct rodder is an auxiliary tool applied in towing lead-rope through a pipe. The rod surface is hard and smooth, so it can get through the narrow pipe or channel easily.The inner core of the rod is made of fiberglass and unsaturated polyester resin. The outside layer...

Dimanche 25 septembre 2016

Prix : 0.1-1usd/meter

Fiberglass duct rodder is an auxiliary tool applied in towing lead-rope through a pipe. The rod surface is hard and smooth, so it can get through the narrow pipe or channel easily.The inner core of the rod is made of fiberglass and unsaturated polyester resin. The outside layer...

Dimanche 25 septembre 2016

Prix : 0.1-1usd/meter

Fiberglass duct rodder is an auxiliary tool applied in towing lead-rope through a pipe. The rod surface is hard and smooth, so it can get through the narrow pipe or channel easily.The inner core of the rod is made of fiberglass and unsaturated polyester resin. The outside layer...

Jeudi 22 septembre 2016

Quantité : 1 unit

RJ 45 Connector Cable Terminal Crimping Machine, Terminal Insertion Machine Feature: 1.The cable crimping machine is specially design for producing internet and phone wire . 2. Various crimping die for your option. 3. Special pressure British or American telephone plugs.Die replacing simple...

Lundi 19 septembre 2016

Quantité : 10/set - Prix : US$ 325

Product Specification Input Voltage 220V AC +/- 10% 50Hz/60Hz Power <=25W</span> Working Frequency 58KHz Outline Dimension 1590x390x20mm Net Weight 18kg Detection Range Each Side DR label: 2x0.85m AM pencil tag: 2x1.3m Working Tag AM hard tag...

Lundi 19 septembre 2016

Quantité : 500 - Prix : 2000/piece

API 17 1/2” S324 PDC Diamond Bit/PDC Cutter Bit/PDC Blades Bit for Oil Drilling 1-Product Specification: Number of Blade: 6 Primary Cutter Type: PDC Primary Cutter Size(mm): 16 Nozzle Qty/Type: 7ND Junk Slot(in^2): 29.8 Gauge Length: 3” Connection Size/Type: 7 5/8” API REG...

Mercredi 14 septembre 2016

Quantité : 500 - Prix : 50,00 €

Swing Check Valve DIN Standard Swing Check Valves (DIN 3202 F6 ,DIN 3202 F1) DIN F6 Swing check valve DIN F1 Swing check valve DIN Rückschlagklappe DIN Válvula de retención clapeta oscilante DIN Zpětná klapka stavební délka dle DIN EN558-1 serie 48 & serie 1 DIN Standard...

Mercredi 14 septembre 2016

Quantité : 500 - Prix : 50,00 €

Lift Check Valve DIN Standard Lift Check Valve DIN Lift check valve DIN Rückschlagventil mit innenliegender Schliessfeder DIN Válvulas de retención de tipo pistón DIN zpětný ventil DIN Standard tilbakeslagsventil med fjærbelastet kjegle DIN Standardında Kumandasız Çek Valf...

Mercredi 14 septembre 2016

Quantité : 5000 - Prix : 50,00 €

Gate Valves (F7 Type) DIN Standard F7 Gate valves / (Length acc.to DIN EN 558-1,face to face series 26 ) DIN F7 Gate valve DIN Absperrschieber F7 DIN Válvulas de compuerta F7 DIN F7 šoupátko stavební délka dle DIN EN558-1 serie 26 DIN Standard F7 sluseventil (lengde iht. DIN EN 558-1...)

Mercredi 14 septembre 2016

Quantité : 5000 - Prix : 50,00 €

Robinet à soupape PN 16/25/40 Acier moulé - Robinet à soupape PN 25‑40 - Construction suivant DIN 3356 - Diamètre : DN15 à DN300 - Chapeau boulonné à arcade - Presse-étoupe boulonné - Tige montante à filetage extérieur - Ecartement suivant EN 558‑1 Série 1 - Raccordement...

Mercredi 14 septembre 2016

Quantité : 5000 - Prix : 50,00 €

Gate Valves (F4 Type) DIN Standard F4 Gate valves / (Length acc.to DIN EN 558-1,face to face series 14 ) DIN F4 Gate valve DIN absperrschieber F4 DIN Válvulas de compuerta DIN F4 šoupátko stavební délka dle DIN EN558-1 serie 14 DIN Standard F4 sluseventil (lengde iht. DIN EN 558-1...)

Mercredi 14 septembre 2016

Quantité : 5000 - Prix : 100,00 €

Corps Acier A216 WCB & GS-C25 & 1.0619 & GP240GH - Clapet Inox 420 - Siège Inox 420 - Soufflet Inox 321 - Presse étoupe Graphite Tige et volant montants tournants - Chapeau et presse étoupe boulonnés - A brides RF PN16/ PN25/40 - Commande par volant fonte - Peinture...

Mercredi 14 septembre 2016

Quantité : 5000 - Prix : 50,00 €

Corps Acier A216 WCB & GS-C25 & 1.0619 & GP240GH - Clapet Inox 420 - Siège Inox 420 - Soufflet Inox 321 - Presse étoupe Graphite Tige et volant montants tournants - Chapeau et presse étoupe boulonnés - A brides RF PN16/ PN25/40 - Commande par volant fonte - Peinture...

Mercredi 14 septembre 2016

Quantité : 5000 - Prix : 50,00 €

Y FILTRE Corps Acier A216 WCB & GS-C25 & 1.0619 & GP240GH - Cartouche inox 304 démontable - Joint Graphite Bouchon de purge acier Montage horizontal ou vertical avec fluide descendant Respecter le sens de passage indiqué sur le corps par une flèche Connection: DIN...

Mercredi 14 septembre 2016

Quantité : 5000 - Prix : 50,00 €

Corps Acier A216 WCB & GS-C25 & 1.0619 & GP240GH - Clapet Inox 420 - Siège Inox 420 - Soufflet Inox 321 - Presse étoupe Graphite Tige et volant montants tournants - Chapeau et presse étoupe boulonnés - A brides RF PN16/ PN25/40 - Commande par volant fonte - Peinture...

Mardi 13 septembre 2016

Quantité : 10000 - Prix : 1000~60000

API PDC Diamond Bit/PDC Cutter Bit/PDC Blades Bit for Oil Drilling 1-Product Specification: Number of Blade: 5 Primary Cutter Type: PDC Primary Cutter Size(mm): 13 Nozzle Qty/Type: 3ND Junk Slot(in^2): 29.8 Gauge Length: 3” Connection Size/Type: 6-5/8” API REG Operating...

Mardi 13 septembre 2016

Quantité : 1 - Prix : 1000~60000

API 12 1/4” M323 PDC Diamond Bit/PDC Cutter Bit/PDC Blades Bit for Oil Drilling 1-Product Specification: Number of Blade: 7 Primary Cutter Type: PDC Primary Cutter Size(mm): 13 Nozzle Qty/Type: 7ND Junk Slot(in^2): 29.8 Gauge Length: 3” Connection Size/Type: 6-5/8” API REG...

Samedi 10 septembre 2016

Origin: Henan, China (Mainland) Brand: Dashan Model: OEM Type: Sleeve Material: Copper Copper alloy: Brass, bronze, lead bronze Size: OEM Condition: New Processing: CNC Machining Processing Type: Machined Accessories Samples: Available Customized: As drawing Weight: Based...

Vendredi 09 septembre 2016

Quantité : 2500sqm - Prix : 1.5$

High-quality and customized tarpaulin with high tenacity, tear strength, adhesion strength, light fastness, antimidew and flame retardancy features. In addition, width, length, color, weight and lacquering treat can be amended according to specific requirements. Tarpaulin can be...

Vendredi 09 septembre 2016

Prix : FOB SHANGHAI USD$600

Plate compactor,there are internal combustion and electric vibrating plate ram. Features and Advantages: 1.Hydraulic adjustable control lever for easy direction change 2.On the spot compaction for problem areas 3.Heavy-duty shock mounts reduce vibration to the upper deck 4.Impact-resistant...

Vendredi 09 septembre 2016

Quantité : 1 - Prix : FOB SHANGHAI USD$500

Plate compactor,there are internal combustion and electric vibrating plate ram. Features and Advantage: 1.Easy-to-reach located controls 2.Large shock mounts reduce vibration to the handle 3.Heavy-duty shock mounts reduce vibration to the upper deck 4.Wear-resistant base plate extends life...

Jeudi 08 septembre 2016

Quantité : 10 set - Prix : US$15000-20000/set

20t Trackless Industrie Livraison électrique Transfert Panier La série BWP Trackless électrique Transfert panier est alimenté par la batterie de stockage. La batterie est installée dans le chariot de transfert et nous équiper aussi chargeur intelligent pour cela. La voiture de transfert...

Mercredi 07 septembre 2016

- - Origin: China (Mainland) Brand Name: Dashan Model Number: OEM Type: Sleeve Material: copper Copper alloy: Brass, bronze, lead bronze Dimension: OEM Condition: New Processing: CNC Machining Processing Type: Machined Accessories Samples: Available Customized: As drawing Weight...