EXTRUDER - 606 Annonces

Vendredi 22 avril 2022

Quantité : 300m-350m/ - Prix : 100USD

Extrusion barrel plays an importante role inside extruder. Barrel and screw elements are corporated each other to support extruder process smoothly. Extruder side open barrels have opening both at the top and side . The upper opening is for venting purposes. Technical Data of Extruder...

Vendredi 22 avril 2022

Quantité : 300m-350m/ - Prix : 100USD

WITH REGARD TO PRODUCTION SPECIFICATIONS, LESUN NOT ONLY OFFERS STANDARD TWIN SCREW EXTRUDER PARTS MADE BY GENERAL SCREW EXTRUDER MANUFACTURER, BUT ALSO PROVIDES SPECIAL-PURPOSE feed screw design AND MANUFACTURING SERVICE ACCORDING TO YOUR REQUIREMENTS. MEANWHILE, WE ALSO PROVIDE...

Mercredi 20 avril 2022

Mesh Net for Sale The HDPE net is a food grade plastic raw material (HDPE) which is heated and melted in an extruder, extruded through a screw, and enters an extra-rotary head with a small hole in the surface of the mold. The molten plastic flows through the pores of the die to form...

Samedi 16 avril 2022

Quantité : 10 product - Prix : USD 30,000.00-700,00

( WIDTH ) 700-2000MM ( THICKNESS ) 0.5-15MM Polyethylene foamed sheet ( film ), also named as pearl cotton. Performance & Advantages of EPE Foamed Sheet / Film Production Line With the features of dampproof, shock proofing, sound insulation, heat preservation and good plasticity...

Samedi 16 avril 2022

Quantité : 10 product - Prix : USD 30,000.00-700,00

Compared with the knife-up cutting machine, it has obvious advantages, no chips, no noise, low power, energy saving, no waste of raw materials, low cost and manual processing of burrs. It is the first choice for the upgrading of merchants' cutting equipment. The cut end of the pipe...

Samedi 16 avril 2022

Quantité : 10 product - Prix : USD 30,000.00-700,00

1. Four rounds of vertical design, small size, easy to move; 2. With cycloid reducer motor; 3. Low noise and durablility; 4. A short time to complete the uniform mix; 5. Low energy consumption, high efficiency; 6. Bottom lid, barrel bottom-weight moulding, with precision, more durable; 7...

Samedi 16 avril 2022

Quantité : 10 product - Prix : USD 30,000.00-700,00

Hopper dryer is the replacement product of standard hot air dryer, which is improved on the basis of the original function to fully consider the environmental factors. It can dry raw materials that are moist from packaging, transportation or recycling. In the processing of raw materials...

Samedi 16 avril 2022

Quantité : 10 product - Prix : USD 30,000.00-700,00

Plastic extrusion is defined as a manufacturing process (high-volume), in which the raw plastic / raw plastic material is melted and then formed in a continuous profile. With this process, various products can be manufactured such as pipe/tubing, window frames, weather stripping, wire insulation...

Jeudi 07 avril 2022

Quantité : 1-100 - Prix : USD 50000-5000000

Advanced crop process engineering machinical types of equipment, testing instruments, sophisticated manufacturing production technology in agriculture, and strict & perfect quality management system. Hongvadar agricultural product processing held the ISO9001 quality system certification...

Mercredi 09 mars 2022

Methyltrichlorosilane (M1) 390 Name: Methyltrichlorosilane (M1) Feature: This product is a colorless transparent liquid. It is the main material of silicone products to produce methyltriethoxysilane and silane crosslinking agent (methyl triethoxysilane and methyltrimethoxysilane)...

Mardi 08 mars 2022

Prix : 10-30USD

Stretch Film Extrusion Line The film stretching production line developed by Jwell company has the following characteristics: - Specially designed longitudinal drawing roller. - The power transmission and control system shall be international famous brands. - The control system...

Mardi 08 mars 2022

Prix : 1000-6000USD

Normally two ways to make spandex yarn, dry spinning and melt spinning. Dry-method uses solvents. Solvents not only damage the environment but also harm the human body. The residual toxic solvents in the products have been banned by the European Union for the use of dry-method spandex...

Mardi 08 mars 2022

Prix : 1000-6000USD

Sheet Extrusion Line Sheet extrusion line refers to the production equipment which is used to heat the plastic raw materials (particles) in the plastic extruder, melt them, and then extrude them into sheets through the mould. Plastic sheet produced by equipment and machine in plastic...

Mardi 08 mars 2022

Prix : 1000-6000USD

PVC Twin Screw Extruder PVC is a non-crystalline polymer of polyvinyl chloride. Its glass transition temperature is 105℃-75℃ depending on the molecular weight. It has flame retardancy, high rigidity, excellent chemical resistance, and electrical insulation, but it is a heat-sensitive resin...

Mardi 08 mars 2022

Prix : 1000-6000USD

PVC Profile Extrusion Line This PVC profile extrusion line features stable plasticization, high output, low sheering force, long life service, and other advantages during PVC profile extrusion process. The production line consists of control system, conical twin-screw extruder or...

Mercredi 23 février 2022

Prix : 100USD

Rectangular splines are mostly six splines. This type of spline is better than a single key and can withstand greater torque. It is convenient for various screw elements to be mounted on the mandrel. The mandrel material is also a 40CrNiMoA forging of alloy structural steel. Quench...

Mercredi 23 février 2022

Prix : 100USD

This side extruder feed screw is to help the bulk materials that are fed into the extrude. This extruder feed screw features a smooth surface finish and pocket-to-pocket accuracy for flawless container transfer without scuffing, damage. Feed Screw Manufacturer LESUN is a sophisticated...

Mercredi 23 février 2022

Prix : 100USD

Screw Shaft Manufacturer Screw Shaft Diameter: φ20 mm ~φ300 mm Screw Shaft Properties: Wear-resisting, Corrode-resisting, Durable Shaft screw is key to pow transmission and ensure the extruder running smoothly. That's the reason why we do more tests on individual combination to...

Mercredi 23 février 2022

Prix : 100USD

Kneading Screw Elements Manufacturer Kneading Element Diameter: φ20 mm ~φ300 mm Kneading Block Properties: Wear-resisting, Corrode-resisting, Durable The conveying screw element is self-sweeping type, open longitudinally and closed laterally, which has strong conveying effect. Short...

Mercredi 23 février 2022

Prix : 100USD

Good force pull on the material ,meanwhile the material can be fully distributed evenly without shearing, so the temperature of the material could be cooling down Technical Details of Mixing Rotor Brand：LESUN Model：φ20 ~ φ300 Material：38CrMoALA/ W6Mo5Cr4V2/ HIP Properties: Wear-resisting...

Mercredi 23 février 2022

Prix : 100USD

The involute spline shaft is the form of mandrel splines used by all the twin screw extruders over the world. The involute spline shaft standard are Chinese GB standard, German DIN5480 (or DIN5482) and Japanese standard. The design of this spline can make the groove depth of the screw larger...

Mardi 11 janvier 2022

As one of the reliable custom silicone manufacturers in China, SiSiB supplies products like silanes and siliconates, silicone fluids, silicone emulsion, silicone gel and oil, silicone polymer, silicone rubbers, silicone resins and fumed silicas, all manufactured by our factory. SiSiB...

Samedi 25 décembre 2021

HANGZHOU CANDID I/E CO., LTD located in Rm703, NO346 Qingtai street is a professional company specialize in stationery machine designing, manufacturing and export. Founded in 2004, our machines have been exported to more than 30 countries. Main market including: Asia, Africa, America...

Jeudi 23 décembre 2021

Nanjing Lesun Screw Co.,Ltd specialize in the manufacture of parallel co-rotating modular screw element, barrel and shaft, involving various types that lies between Ø20mm to Ø300mm. After ten years of luxuriant development, our company now owns several sets of advanced CNC machines...

Jeudi 23 décembre 2021

Nanjing Lesun Screw Co.,Ltd specialize in the manufacture of parallel co-rotating modular screw element, barrel and shaft, involving various types that lies between Ø20mm to Ø300mm. After ten years of luxuriant development, our company now owns several sets of advanced CNC machines...

Jeudi 23 décembre 2021

Nanjing Lesun Screw Co.,Ltd specialize in the manufacture of parallel co-rotating modular screw element, barrel and shaft, involving various types that lies between Ø20mm to Ø300mm. After ten years of luxuriant development, our company now owns several sets of advanced CNC machines...

Jeudi 23 décembre 2021

With regard to production specifications, LESUN not only offers standard twin screw extruder parts made by general extruder screw manufacturer, but also provides special-purpose extruder parts design and manufacturing service according to your requirements. Screw Barrel Manufacturer...

Jeudi 23 décembre 2021

With regard to production specifications, LESUN not only offers standard twin screw extruder parts made by general extruder screw manufacturer, but also provides special-purpose extruder parts design and manufacturing service according to your requirements. Barrel plays an importante...

Jeudi 23 décembre 2021

With regard to production specifications, LESUN not only offers standard twin screw extruder parts made by general extruder screw manufacturer, but also provides special-purpose extruder parts design and manufacturing service according to your requirements. Conveying Screw Element...

Mardi 21 décembre 2021

Quantité : 1-100 - Prix : USD 50000-5000000

HongVader as agricultural processing plants play the roles of corn, sweet corn processing plant, potato processing plant, starch of corn and wheat processing plant, taking wheat, rice, cassava processing, msg project, and production lines of ethanol glucose, DMH, fructose, sorbitol...