Chine (Rép. pop) Biens d'équipement
Biens d'équipement

Blind & Buried VIA PCB

Prix : 30-210 USD

Custom blind and buried vias fabrication from professional and experienced pcb board supplier at low cost.

First of all, we start with traditional multi-layer boards. The structure of a standard multi-layer circuit board is a process including an inner layer line and an outer layer line, followed by drilling, and metallization in the hole to achieve the internal connection function of each layer line. However, due to the increase in line density, the way parts are packaged is constantly updated. In order to allow for a wider board area, more high-performance parts can be placed. In addition to the thinner line width, the aperture is also reduced from 1 mm in the DIP jack to 0.6 mm in SMD, and further reduced to 0.4 mm or less. However, the surface area is still occupied, so that there are buried holes and blind holes.

The Buried Holes and Blind Holes are Defined as Follows

Blind Vias: A blind via is a type of via that connects the inner trace of the PCB to the trace of the PCB surface. This hole does not penetrate the entire board.

Buried Vias: Buried vias are only connected to the type of vias between the inner layers, so they are not visible from the surface of the PCB.

Advantages of Blind Buried Hole Printed Circuit Board

Eliminate a large number of through-hole designs and increase wiring density and package density;

Diversify and complicate the design of the interconnect structure of the multi-layer board;

Significantly improved the reliability of multi-layer boards and the electrical performance of electronic products.

The Following Three Points are Distinguished for Blind Buried Plate Boards

In contrast to the through hole, the through hole refers to a hole through which each layer is drilled, and the blind hole is a non-drilled through hole.

Blind hole subdivision: blind hole, buried hole (outer layer is not visible).

Distinguish from the production process: blind holes are drilled before pressing, and through holes are drilled after pressing.

Blind buried hole technology is mainly used on relatively high-end PCBs, with high technical content and high requirements for PCB board manufacturers.

Localisation : Building 1, Huaide Cuigang Industrial Zone 3, Fuyong Street, Baoan District , Shenzhen, Guangdong 518103, China , 518103 Fuyong Street,
Personne à contacter : Mo Jack, +15 9 76 88 36 32

Bonne affaire : acheter au vendeur

Consultez notre guide pour effectuer une transaction en toute sécurité ! En aucun cas Algomtl ne peut être tenu responsable des annonces publiées. Seule la responsabilité du vendeur ou de l'acheteur en cas de litige est engagée.
Nous vous invitons à lire nos conditions générales d'utilisations. Vous pouvez aussi vous rendre sur nos FAQ et consulter notre page d'informations sur les risques liés à la contrefaçon.
Cette page concerne les importateurs et exportateurs de
Blind & Buried VIA PCB

Rechercher dans la catégorie : Biens d'équipement
Rechercher dans la catégorie :
buried, blind
Thailande 10500 Téléphonie
Samsung Galaxy SIII Android 4.0.4 Smartphone

Lundi 04 mars 2013

Quantité : 30 - Prix : $395.00

It's not just phone we're talking about... it's smart phone... it's Samsung GALAXY S III. It has the looks and a symmetry which would make you proud to hold it in your hands. You couldn't ask for more imposing façade than its 4.8 inches HD Super AMOLED high-definition display. It delivers...

Mobiworld

Taiwan 833 Véhicule
Top Opening Gear Shift Lock

Mardi 11 août 2015

Prix : 1$ ~30 $

One Lus International is a professional gear shift lock manufacturer in Taiwan and provides a series of gear shift lock to meet customer's needs. The top opening gear shift lock is easy to operate and convenient to use. The top opening gear shift lock is suitable for automatic & manual...

One Lus International Co., Ltd.

Chine (Rép. pop) 523720 Véhicule
YD-FGB001 aluminum alloy fixed gear bicycle track bike

Vendredi 06 juin 2014

- Quick Details - - Type: Fixed gear bike - Wheel Size: 26" - Frame Material: Aluminum Alloy - Fork Material: Aluminum Alloy - Rim Material: Aluminum Alloy - Gloss Weight: 17KG - Net Weight: 15KG - Brand Name: YEDO - Model Number: YD-FGB001 - Place of Origin: Guangdong...

Dongguan Yedo Industrial Co., Ltd.

  • 523720 - Dongguan
  • 8676981001018