Automatic Foil Stamping&Die Cutting Machine
We designed 1050FH Automatic Foil Stamping Die Cutting Machine, which is the greatest research and development and manufacturing of new equipment with a higher degree of intelligence.
This automatic foil stamping machine and automatic foil printing machine adopts many international advanced pneumatic and servo-driven processing technologies. After strict quality control of assembly, our automatic foiling machine has the advantages of simple operation, safety and reliability.
This automatic foiling machine can perform stamping, creasing and die-cutting operations after printing on paper, cardboard, corrugated paper less than 4mm, paste paper and laminated paper of 80g/m² or more.
When the speed of automatic foil stamping & die cutting machine reaches 7,500 sheets/hour, the good quality and design make the machine work stably as well as ensure safety. As one of the mature automatic die cutting machine manufacturers, we produce machines that will provide you with a comfortable operation and faster return on investment.
Features of Automatic Foil Stamping&die Cutting Machine
Feeder/Feeding Section
Imported high quality feeder, high precision, stable in high speed.
Four suction nozzles, four sending nozzles, ensure feeding smoothly.
Adopt imported screw air-blowing device, it could make the sheet send smoothly.
Suction angle and height can be adjustable.
Non-stop paper feeding device
Double sheet detecting system
Suction-blow two function vacuum pump
The design of stacker preparatory
stage was improved, it could use
prepared car sheet piling. Also could
use ordinary hydraulic car sheet piling
to stacker directly.
Feeding Positioning Section
The incline-type paper moving table top is more suitable to high-speed thin paper and location. Side location adopt dual purpose side device with pull guide and push guide, accounting to paper choose, it makes switch easier. It could switch front rise position arriving reduction of speed device, it is benefit of thin paper's location.
Cutting Section/Horizontal and vertical foil stamping system
Adopt advanced technology with single gripper location could adjust the front-and-back registration. Horizontal hot stamping dual-anxis/Vertical hot stamping collection of waste foil frame into operation side, it is benefit of operation. 12 electric heating areas have timing penumatic temperature controller function, each area can be controlled separately. It makes foil-delivering servo curve tracking the speed variation of machine in time for using motion controller. So it could reach the foil-delivering smoothly.
Foil Stamping/ Die Cutting Section
The driving gear ensures high speed of die cutting together. The pneumatic locking mechanism and air clutch are fast and stable. The die cutting frame can prevent the die cutting plate from drooping or separating effectively.
Quick Changed Foil Device
Vertical under foil frame could be pulled out of machine, so that it could make the foil work more convenient.
Rewinding Device
There has brush rewinding foil function. And it has equipped with a re-coil collection waste foil device. The buffer force prevent the foil from broken.
Delivery Section
Delivery section add tester into security system. It is equipped with inset counter. Using subsection could adjust brush and sheet air-blowing device, so the finished product of delivery section could product stably. Gripper drive train expanded buffer device. A non-stop paper delivery device bring high efficiency and fast return.
Specification of Automatic Foil Stamping&die Cutting Machine
Max. Paper Size 1050×750 mm |
Min. Paper Size 400×360 mm |
Max. Cutting Size 1040×720 mm |
Max. Foil Stamping Size 1020×600 mm |
Inner Chase Size 1080×745 mm |
Steel Plate Size 1080×736 mm |
Processed Materials Cardboard:80~2000 g/m² Corrugated Paper:≤4mm |
Max. Pressure 300 N/cm² |
Gripper Margin 8 mm |
Max. Working Speed 7500 s/h |
Total Weight 16.8 T |
Dimension (L×W×H) 7060×4200×2230 mm |
Max. Feeding Pile Height 1550 mm |
Max. Delivery Pile Height 1400 mm |
Foil Shaft V3+H2 |
Vertical foil stamping section performance specification |
Max. Foil Width 1020 mm |
Min. Foil Width 25 mm |
Max. Length of Pull Foil 700 mm |
Max. Diameter of Foil Φ 240mm |
Horizontal foil stamping section performance specification |
Max. Foil Width 600 mm |
Min. Foil Width 25 mm |
Max. Length of Pull Foil 1020 mm |
Max. Diameter of Foil Φ200 mm |
Foil stamping system&other comprehensive performance specification |
Stamping temp. adjustable range 0℃~200℃ |
Heating zones 12 |
Heated Plate Power 24 kw / 24kw |
Total Power 57 kw |
Voltage Requirements 380V 50Hz |
Air compressor 0.8Mpa, 0.36m² /min |
No. |
Accessory |
Brand |
Place of Origin |
1 |
Photoelectric Switch |
SUNX |
Japan |
2 |
HMI |
WEINVIEW |
Taiwan |
3 |
Button |
SCHNEIDER |
France |
4 |
A.C. Contactor |
SIEMENS |
Germany |
5 |
Solid State Relay |
FOTEK |
Taiwan |
6 |
PLC |
MITSUBISHI/PANASONIC |
Japan |
7 |
Electric Horn |
QLIGHT |
Korea |
8 |
Magnetic Valve |
SMC |
Japan |
9 |
Oil-water Separator |
AIRTAC |
Taiwan |
10 |
Motor Breaker |
SIEMENS |
Germany |
11 |
Servo Motor |
YASKAWA |
Japan |
12 |
Main Motor |
TECO |
Taiwan |
13 |
Gear Motor |
CPG |
Taiwan |
14 |
Oil Pressure Switch |
ARK |
Korea |
15 |
Pneumatic Clutch |
OMPI |
Italy |
16 |
Paper Feed Clutch |
MIKIPULLEY/OGURA |
Japan |
17 |
Torque Limiter |
JASU |
Taiwan |
18 |
Indexing Drives |
TAN TZU |
Taiwan |
19 |
Vacuum Pump |
BECKER |
Germany |
20 |
Feeder |
YONGCHUAN |
Taiwan |
21 |
Feeder Nozzle |
SILENT |
Sweden |
22 |
Tooth Row Drive Chain |
RENOLD |
Britain |
23 |
Other Drive Chain |
TYC |
Taiwan |
24 |
Tooth Row |
JASU |
Taiwan |
25 |
Bearing |
FALA/IKO |
Germany/Japan |
26 |
Rotary Joints |
DEUBLIN |
America |
27 |
Timing Belt |
OPTIBELT |
Germany |
28 |
Paper Feed Belt |
CODONBELT |
Switzerland |
29 |
Mould Coil Spring |
TOHATSU |
Japan |
30 |
Worm&Worm Wheel |
LIMING |
Taiwan |
31 |
Oil Temp.Conditioning System |
WLP |
Taiwan |
32 |
Cooling Fan |
SUNON |
Taiwan |
33 |
Heat Exchanger |
LEINIX |
America |
34 |
Lubrication Pump |
YONGSHENG |
Taiwan |
35 |
Encoder |
OMRON |
Japan |
36 |
Sealing Ring |
CTY |
Germany |
37 |
Frequency Converter |
YASKAWA |
Japan |
38 |
Body Material |
Ductile Iron QT600-3 |
|
Highlights of Automatic Foil Stamping&die Cutting Machine
01
Pneumatic Clutch
The high quality pneumatic clutch reduces noise and minimizes impact when stopping the machine at a high speed.
02
Lubrication System
With a programmable lubrication system, the accurate control of PLC ensures balanced lubrication of the machine.
03
Vacuum Pump
Adopt imported equipment, improve the stability of the machine, low noise, high performance, long service life.
04
Gripper and Chain
The grippers are made of special extra hard aluminum alloy, with anode treatment on the surface, ensuring accurate die cutting and embossing, etc. at high speed. The adjustment mechanism, patent design guarantees very accurate control. An imported chain is used for the main gripper transmission, with strength increased by 45% for accurate stability and prolonged life.
05
Electrical Cabinet
Electronic components are all world-famous, high quality ensured.
06
Plates Quick Change Device
Shorten the time for changing Plate, Improve the production efficiency.
If you want to find a reliable packaging machinery factory, please choose us,and we will be your best partner.
Personne à contacter : mechanical growing, +15 0 18 48 19 35
Bonne affaire : acheter au vendeur
Nous vous invitons à lire nos conditions générales d'utilisations. Vous pouvez aussi vous rendre sur nos FAQ et consulter notre page d'informations sur les risques liés à la contrefaçon.
Cette page concerne les importateurs et exportateurs de Automatic Foil Stamping&Die Cutting Machine Rechercher dans la catégorie : Pro / B2B Rechercher dans la catégorie : machine, stamping&die, foil, cutting, automatic |
Jeudi 20 juin 2013
Quantité : 1 - Prix : 10000 USD
Chaudière en acier inoxydable ET EQUIPEMENTS NOS ZONES DE PRODUCTION INDUSTRIE ALIMENTAIRE • bonbons durs et mous LIGNES DE PRODUCTION • CHOCOLAT LIGNES DE PRODUCTION • HALVA, confiture, miel, RAISIN LIGNES DE PRODUCTION la mélasse • TAHINI, graines de sésame USINES...
TURKON EXPORT LTD.
- 42050 - KONYA
- +905353265862
Dimanche 10 août 2014
Quantité : 25 - Prix : USD 3900-88888
Quick Details Condition: New Type: Rotary Drying Equipment,drying machine Place of Origin: Henan China (Mainland) Brand Name: YongHua Model Number: GZ Series Voltage: 380v/50hz Power(W): 22kw Dimension(L*W*H): According to customer's requirement Weight: 8t Certification...
Henan Zhengzhou Yonghua Machinery
- olina1
- 450000 - zhengzhou CITY
- +13 6 07 69 93 63
Vendredi 22 novembre 2013
Quantité : gros quant - Prix : contacte moi svp
bonjour tout le monde. La société les deux frére Industry est spécialisée dans la remise en marché de marchandises industrielles de tous domaines. Nous sommes donc intéressés par l'achat de tels articles autant en grande qu'en petite quantité. Il peut ainsi s'agir d'articles neufs...
les deux fréres
- 1060 - bruxelles
- +32 4 84 70 13 68