Automatic Dewaxing Autoclave
Dewaxing Autoclave is special designed for removing the wax patterns in the ceramic shell.
Features
·Integrated Chambers
Designed as integration with the steam generator and dewaxing chamber to save space. The dewaxing chamber is always under a high temperature condition with a short pressure balance time between the double chambers when the high-temperature steam enters into inner side, and also decreasing moisture content in the drained wax.
·Advanced Control
With PLC control system to ensure the logical interlock of temperature, pressure, water level, steam in, dwell, steam out and door operation can be controlled automatically except closing/opening door and placing in/out shell clusters. And also features with water feeding and stopping automatically, a sound-light alarm for the high-low water level and contactless heating. Heat recovering unit can be supplied for saving energy with additional cost.
·Good Safety Performance
This machine complies with all the safety regulations of pressure vessel. It features with seven safeguards including temperature safety control, pressure safety control, safety valve protection, no steam delivering without door-closing in place, the door is unable to open if there is any residual pressure in the chamber, no steam in when the inner air release valve opens, residual pressure protection of autoclave door. There is an obvious safety warning board in front of the operating door.
·High-grade Configuration
The key control components are all imported products or supplied by joint venture. And the key valve is imported from UK.
·Energy saving and environment friendly
The outside cover of autoclave is made of new thermal insulation material with a lower heat-contacting coefficient, good thermal barrier effect and decreasing the fuel consumption.
·Attractive Appearance
Besides the quality, we also pay special attention to the appearance design and surface treatment for our machines with the characters of reasonable process, advanced technology, beautiful appearance and fluent colors.
Specifications
Model |
YT-DRTF800 |
YT-DRTF1000 |
YT-DRTF1200 |
YT-DRTF1400 |
Inside dimension |
Φ800×1200mm |
Φ1000×1200mm |
Φ1200×1500mm |
Φ1400×1600mm |
Inside material |
Carbon steel or SS304/316L |
Carbon steel or SS304/316L |
Carbon steel or SS304/316L |
Carbon steel or SS304/316L |
Working temperature |
≤179℃ |
≤179℃ |
≤179℃ |
≤179℃ |
Design pressure |
1.0 MPa |
1.0 MPa |
1.0 MPa |
1.0 MPa |
Dwell time |
0~60min (adjustable) |
0~60min (adjustable) |
0~60min (adjustable) |
0~60min (adjustable) |
Note: We can design the special machines according to the customer's requirements.
The Automatic Dewaxing Autoclave can fit with an Energy Recovery System with additional cost.
Personne à contacter : Ma Fiorina, 00863358015998
Bonne affaire : acheter au vendeur
Nous vous invitons à lire nos conditions générales d'utilisations. Vous pouvez aussi vous rendre sur nos FAQ et consulter notre page d'informations sur les risques liés à la contrefaçon.
Cette page concerne les importateurs et exportateurs de Automatic Dewaxing Autoclave Rechercher dans la catégorie : Biens d'équipement Rechercher dans la catégorie : automatic, dewaxing, autoclave |
Vendredi 22 août 2014
Nous sommes les principaux fournisseurs de boissons énergisantes comme Red Bull, requin, chargeur et bien d'autres.Nous pouvons également fournisseur can boissons comme Pepsi, Coca cola, Fanta, Sprite et autres produits.Nous fournissons également la meilleure qualité de l'eau minérale...
Chefs Pantry PVT LTD
- 0034 - 34468 Lantadilla, Palencia, Spain
- 9641254
Jeudi 28 septembre 2017
Quantité : as per ite - Prix : based on Qty
Dear Sir, We deal with Building Materials & Machine Spares since 1987 and LED Lighting and Solar Products since 2014. Our Product Range : Structural Steel : MS Angles, Channel, Beams, Flat Bar, Plain sheets, Chequered plates,Round Bars. Aluminum: plain sheets, Angles, Flat Bars...
Rashid Essa Building Material Co. LLC
- sajj
- 971 - dubai
- 04 2563282
- 971 55 6995965
Mercredi 14 septembre 2016
Quantité : 5000 - Prix : 100,00 €
Corps Acier A216 WCB & GS-C25 & 1.0619 & GP240GH - Clapet Inox 420 - Siège Inox 420 - Soufflet Inox 321 - Presse étoupe Graphite Tige et volant montants tournants - Chapeau et presse étoupe boulonnés - A brides RF PN16/ PN25/40 - Commande par volant fonte - Peinture...
ETM Armaturen
- 59590 - Henri Durre
- 86 577 67953935