AlNiCo Magnets
Quantité : 500tons Prix : USD0.015-----USD100
Category: AlNiCo magnets/metal perpament magnets
Advantages: high magnetic energy, good temperature stability
Disadvantages: very low coercive force,easy to be demagnetized, magnetic circuit design can not use thin disc magnets, and must be assemblied first then overall magnetized
AlNiCo magnet is the earliest developed permanent magnetic material, it is an alloy of Al, Ni, Co, Fe and another rare metal element. AlNiCo permanent magnets birthed in 30 years of 20 Century, its magnetic property is best in the years, so it was most widely used in permanent magnetic motors. But that application in motors was replaced step by step when ferrite permanent magnets and rare earth magnets produced. And the proportion of AlNiCo application for motors went down. For AlNiCo magnets, the ability of corrosion resistant is good, surface treatment is not needed for it. It usually made into cylinder AlNiCo magnets or block AlNiCo magnets. The advantages of AlNiCo magnets are high remanence (maximum up to 1.35T) and low-temperature coefficient(-0.02%/℃), maximum working temperature is around 520℃, the magnetic properties change caused by temperature change is very small. The disadvantages of AlNiCo are low coercivity (normally lower than 160KA/m), and the demagnetize curve is not linear, it is easy to be magnetized and also easy to be demagnetized.
According to the different production methods, it classified as sintered AlNiCo magnets and cast AlNiCo magnets. Cast AlNiCo can be machined into different shapes and sizes, for all kinds of permanent magnets, cast AlNiCo magnets have the lowest Temp.Coefficient, its working temperature can be up to 600 degrees. Cast AlNiCo magnets are used for kinds of instruments and meters, auto parts,electric-acoustic, teaching field etc.
Compared with cast AlNiCo magnets, sintered AlNiCo magnets suit for making complex shapes and smaller sizes,the size tolerance for sintered AlNiCo magnets is smaller and better than cast AlNiCo magnets. For sintered AlNiCo magnets, the process is simple and it can be pressed into needed size directly.The property of sintered AlNiCo magnets is lower than cast alnico magnets china, but sintered china alnico magnets more suitable for machine.Sintered AlNiCo magnets are wide used on instruments and meters, comm unicate,magneto-electricity switch, and kinds of transducers.
Type |
(BH)Max |
Br |
Hcb |
D |
a(Br) |
Tc |
Tw |
|||
KJ/cm3 |
MGOe |
mT |
Gs |
KA/m |
Oe |
g/cm3 |
﹪/K |
℃ |
℃ |
|
LN9 |
9.0 |
1.13 |
680 |
6800 |
30 |
380 |
6.9 |
-0.03 |
760 |
450 |
LN10 |
10.0 |
1.20 |
600 |
6000 |
40 |
500 |
6.9 |
-0.03 |
760 |
450 |
LNG12 |
12.4 |
1.55 |
720 |
7200 |
45 |
500 |
7.0 |
-0.03 |
810 |
450 |
LNG13 |
13.0 |
1.60 |
700 |
7000 |
48 |
600 |
7.0 |
-0.03 |
810 |
450 |
LNG34 |
34.0 |
4.30 |
1200 |
12000 |
48 |
600 |
7.3 |
-0.02 |
860 |
525 |
LNG37 |
37.0 |
4.65 |
1200 |
12000 |
48 |
600 |
7.3 |
-0.02 |
860 |
525 |
LNG40 |
40.0 |
5.00 |
1250 |
12500 |
48 |
600 |
7.3 |
-0.02 |
860 |
525 |
LNG44 |
44.0 |
5.50 |
1250 |
12500 |
52 |
650 |
7.3 |
-0.02 |
860 |
525 |
LNG52 |
52.0 |
6.50 |
1300 |
13000 |
56 |
700 |
7.3 |
-0.02 |
860 |
525 |
LNGT28 |
28.0 |
3.50 |
1000 |
10000 |
58 |
720 |
7.3 |
-0.025 |
860 |
550 |
LNGT36J |
36.0 |
4.50 |
700 |
7000 |
140 |
1750 |
7.3 |
-0.025 |
860 |
550 |
LNGT32 |
32.0 |
4.0 |
800 |
8000 |
100 |
1250 |
7.3 |
-0.025 |
860 |
550 |
LNGT40 |
40.0 |
5.0 |
800 |
8000 |
110 |
1380 |
7.3 |
-0.025 |
860 |
550 |
LNGT60 |
60.0 |
7.50 |
900 |
9000 |
110 |
1380 |
7.3 |
-0.025 |
860 |
550 |
LNGT72 |
72.0 |
9.00 |
1050 |
10500 |
112 |
1400 |
7.3 |
-0.025 |
860 |
550 |
Meank is holding magnets manufacturer,we have alnico magnets for sale,contact us now.
Personne à contacter : meankmagnet meankmagnet, 0086 574 86220016
Bonne affaire : acheter au vendeur
Nous vous invitons à lire nos conditions générales d'utilisations. Vous pouvez aussi vous rendre sur nos FAQ et consulter notre page d'informations sur les risques liés à la contrefaçon.
Cette page concerne les importateurs et exportateurs de AlNiCo Magnets Rechercher dans la catégorie : Divers Rechercher dans la catégorie : magnets, alnico |
Mercredi 14 septembre 2016
Quantité : 5000 - Prix : 100,00 €
Corps Acier A216 WCB & GS-C25 & 1.0619 & GP240GH - Clapet Inox 420 - Siège Inox 420 - Soufflet Inox 321 - Presse étoupe Graphite Tige et volant montants tournants - Chapeau et presse étoupe boulonnés - A brides RF PN16/ PN25/40 - Commande par volant fonte - Peinture...
ETM Armaturen
- 59590 - Henri Durre
- 86 577 67953935
Mercredi 14 septembre 2016
Quantité : 5000 - Prix : 50,00 €
Gate Valves (F7 Type) DIN Standard F7 Gate valves / (Length acc.to DIN EN 558-1,face to face series 26 ) DIN F7 Gate valve DIN Absperrschieber F7 DIN Válvulas de compuerta F7 DIN F7 šoupátko stavební délka dle DIN EN558-1 serie 26 DIN Standard F7 sluseventil (lengde iht. DIN EN 558-1...)
ETM Armaturen
- 59590 - Henri Durre
- 86 577 67953935
Mercredi 14 septembre 2016
Quantité : 5000 - Prix : 50,00 €
Y FILTRE Corps Acier A216 WCB & GS-C25 & 1.0619 & GP240GH - Cartouche inox 304 démontable - Joint Graphite Bouchon de purge acier Montage horizontal ou vertical avec fluide descendant Respecter le sens de passage indiqué sur le corps par une flèche Connection: DIN...
ETM Armaturen
- 59590 - Henri Durre
- 86 577 67953935