PROPERTIES - 6562 Annonces

Mardi 26 juillet 2022

Quantité : 1000tons - Prix : euro958/ton

Pieu d'ancrage de poteau à vis au sol Nos fondations sur pieux vissés sont déjà utilisées en Australie, en Allemagne, au Japon et en Chine en raison de leurs innombrables avantages par rapport au béton et de leurs propriétés environnementales positives. Notre pieu vissé au sol s'installe...

Mardi 26 juillet 2022

Quantité : 30000 pcs - Prix : 4.2-10

R-PLANE (1-102) SAPPHIRE WAFERS R plane sapphire wafers are preferred for the hetero-epitaxial deposition of silicon used in microelectronic IC applications. R plane is the non-polar plane of sapphire. So the different positions of R-plane in custom sapphire optics devices, the mechanical...

Mercredi 20 juillet 2022

Soft Magnetic Bonded Compounds As a new material, soft magnetic compound can be used for extrusion or injection molding and are especially suitable for high-frequency high-speed stator, 5G base station, transformer skeleton applications, it is helpful for the device to be small and lightweight...

Mercredi 20 juillet 2022

High density and metal bonded plastic functional composite materials with complex and delicate structures can also be prepared by the injection molding process. Density can be adjusted as required from 2-13 g/cm3, which can replace some traditional aluminum alloy, zinc alloy, stainless steel...

Mercredi 20 juillet 2022

We can provide customers with appropriate mold design scheme (magnetic circuit design and mold-flow analysis) and optimization processing parameter based on the material characteristics to obtain the best performance of the material, we also cooperate with our customer to analyze...

Mercredi 20 juillet 2022

Permanent magnets are widely used in our lives. Many people are curious about what are made out of permanent magnets? Most permanent magnets are used in the manufacture of various types of permanent magnet motors, the large ones are exciters, auxiliary exciters, generators in airplanes...

Mercredi 20 juillet 2022

In childhood, magnets were one of our favorite toys. We always played with them and were amazed by their peculiar characteristics. Two magnets always have two sides that can attract each other, and two sides will always repel each other. We always split them up and down. In middle...

Vendredi 15 juillet 2022

3105 aluminum sheet is a typical deep-drawing material with an Al content of up to 98%, good rust resistance, and good electrical conductivity up to 41%. Similarly, the 3105 aluminum alloy sheet is a non-heat-treated alloy, which is slightly stronger than the 1 series industrial pure aluminum...

Vendredi 15 juillet 2022

3005 aluminum plate belongs to 3 series Al-Mn alloy with Mn content between 1.0-1.5, and 3003, 3004 aluminum sheet belongs to rust-proof alloy with strong corrosion resistance. Similarly,3005 aluminum sheet is also a non-heat-treated alloy, which is cold-processed to improve its mechanical...

Vendredi 15 juillet 2022

3004 aluminum sheet also belongs to the Al-Mn rustproof alloy series. Its strength is not high (slightly higher than that of industrial pure aluminum), but higher than that of 3004 aluminum properties. Similarly, the 3004 aluminum sheet is a non-heat-treated alloy, and its mechanical...

Vendredi 15 juillet 2022

Quantité : 12000 tons - Prix : $2.5/kg-6.8/kg

Rubber primer paint is combined with a chlorinated rubber resin, curing agent, pigments, anti-rust pigments, fillers and additives. The film-forming material of the product is chemically inactive, good in sealing, and has good resistance to UV, water, salt, alkali, and acids, and...

Vendredi 15 juillet 2022

Quantité : 12000 tons - Prix : $2.5/kg-6.8/kg

Chlorinated rubber anticorrosive intermediate paint is formulated as an anti-corrosion undercoat. It has excellent anti-corrosion performance, water-resistance and shielding properties, with good performance of simple construction and fast drying. It is mainly used as an intermediate...

Vendredi 15 juillet 2022

Quantité : 12000 tons - Prix : $2.5/kg-6.8/kg

The anti-corrosion paint is used for the inner wall of the oil tank. The basic function is to protect the steel oil tank from corrosion, protect the oil from pollution, and prevent static electricity. Epoxy resin is the base material, It is composed of special conductive material...

Vendredi 15 juillet 2022

The new energy connector plugs / connector socket plug conform to global quality standard.Its design includes a complete latching system that ensures clear electronic and mechanical connections and allows the selection of the ideal connector for the specific application. Features...

Jeudi 14 juillet 2022

Quantité : 150000 ton - Prix : USD 2500/T to USD 35

In Otalum, extruded aluminium tubes come in three types: round tube, square tube and rectangle tube. Just like other aluminum extrusions profiles manufactured by Otalum, our aluminum extrusion tubes can also be cut to different sizes if the existing products do not meet your requirements...

Jeudi 14 juillet 2022

Quantité : 150000 ton - Prix : USD 2500/T to USD 35

The aluminium frames around the solar panel is an important but often ignored component of a solar panel. Aluminium profile solar panel frame and mounting bracket are normally used to seal and fix solar battery components. As one of the important industrial alu solar profile produced by Otalum...

Jeudi 14 juillet 2022

The bamboo trailer board produced by Fujian HQC Bamboo Product Co., Ltd. uses fast-growing, high quality, and large plantation moso bamboo as the material. HQC bamboo trailer floor/tail/deck board uses long bamboo sheets as the basic unit that are of constant thickness and width (removing...)

Jeudi 14 juillet 2022

kapton tape adhesive is Polyamide film coated with acrylic glue on one side or both sides, the conventional thickness is 0.05 mm and 0.08 mm, the color can be brown or black. Kapton polyimide tape adhesive can withstand high temperature 130 ℃ 30 minutes, excellent electrical properties...

Jeudi 14 juillet 2022

Nylon sandwich flat belt belongs to high-speed drive belt with innovative and unique material structure. As a professional nylon belt manufacturer, we can offer a rubber nylon sandwich transmission belt and leather nylon core transmission belts. Benefit from our long-term research...

Samedi 09 juillet 2022

Prix : 100USD

Forged steel gate valve is a kind of gate valve whose parts are made of forging material. The gate of the forged steel gate valve moves along the vertical direction of the center line of the passage. It is mainly used for shut-off functions in the pipeline. Forged steel gate valve...

Samedi 09 juillet 2022

Quantité : 30000TONS - Prix : 1-20USD/KG

GRAPHITE POWDER WHOLESALE China graphite powder/graphite dust is a kind of mineral powder, mainly composed of carbon, and is soft, black gray. It is mainly divided into high purity artificial graphite powder super cheap and natural flake graphite powder. In oxygen isolation conditions...

Samedi 09 juillet 2022

Quantité : 30000TONS - Prix : 1-20USD/KG

GRAPHITE PLATE FOR SALE With the development of modern science and technology and industry, carbon china graphite plate has become an indispensable industrial product, and its application is more and more extensive. Graphite plate is a material with electrical conductivity, high temperature...

Samedi 09 juillet 2022

Reinforced with 20% of glass fiber on substrate PA66 is called PA66 GF20, it improves dimensionally stabilized and impact resistance for injection moulding. Typical Application of PA66 GF 20 (A2000D) PA GF20 is applied to various precision gears due to its high rigidity, dimensional stability...

Samedi 09 juillet 2022

Pa6 6 gf15 is Nylon66 and 15% Glass-Filled, these materials are performed with medium stiffness and strength but it has much better mechanical properties over unfilled granules. Reinforced with 15% of glass fiber and modified Nylon 66 in Anmei plastic plant combined with other property...

Samedi 09 juillet 2022

Quantité : 30000TONS - Prix : 1-20USD/KG

In recent years, with the rapid development of die and mould industry, graphite materials, new processes and increasing die and mould factories are constantly impacting the die and mould market. Graphite for mold making has gradually become the preferred material for die and mould...

Samedi 09 juillet 2022

Transparent ABS, also called MABS plastic material, which has excellent transparency, impact toughness and good processing properties. The light transmittance of transparent ABS is about 88%, second only to PMMA (91%) and PC (90%). The main manufacturers of this MABS plastic material...

Samedi 09 juillet 2022

PC-ABS is a blend of PC and ABS. If the two materials are simply mixed and then injected directly, the effect is very poor, and delamination will occur. The advantages of PC are rigidity and toughness, but the disadvantages are stress cracking and high viscosity. The advantage of...

Samedi 09 juillet 2022

Pa6gf50 is a fiber reinforced plastic made of nylon 6 resin as a base material and 50% glass fiber as a reinforcing filler, and various processing aids be added. Typical Application of PA6 GF50 (A1011J) PA GF50 is used to manufacture high-strength and high wear-resistant structural...

Samedi 09 juillet 2022

Polyamide 6 reinforced with 45% Glass Fibers that is PA GF45, medium viscosity and dimensional stability, this material pa 6 has excellent rigidity and high tensile and compressive strength successfully applying to engineering structure parts of mechanical engineering and in the automotive...

Samedi 09 juillet 2022

This non-crystalline, fused colorless silica glass combines a very low thermal expansion coefficient with good optical qualities and excellent transmittance in the ultraviolet region. Transmission and homogeneity exceed those of crystalline quartz without the problems of orientation...