FLOW - 5851 Annonces

Mardi 24 août 2021

Wall-mounted Insertion Transit-Time Ultrasonic Flow Meter Product Description TF1100-EI Wall-mounted Insertion Transit-Time Ultrasonic Flow Meter 30 Year's Technology Insertion Ultrasonic Flow Meter provides abundant capabilities for accurate liquid flow measurement from outside of a pipe...

Mardi 24 août 2021

Wall-mounted Clamp On Ultrasonic Water Flow Meter Product Description TF1100-EC Wall-mounted Clamp On Ultrasonic Water Flow Meter works on the transit-time method. The clamp-on ultrasonic transducers (sensors) are mounted on the external surface of the pipe for non-invasive and...

Mardi 24 août 2021

DF6100-EP Doppler Portable Ultrasonic Flow Meter Product Description DF6100-EP Doppler Portable Ultrasonic Flow Meter Features uRechargeable battery can work up to 50 hours uIt is suitable for pipe sizes ranging from 40 to 4000mm uFor dirty liquids, a certain amount of air bubbles...

Mardi 24 août 2021

DF6100-EI Insertion Series Doppler Ultrasonic Flow Meter Product Description Ultrasonic Flow Meter can measure metal or plastic with a certain amount of air bubbles or suspended solids. Advanced technique allows this instrument to operate with high reliability and low maintenance...

Mardi 24 août 2021

Product Description DF6100-EC Wall-mounted Doppler Ultrasonic Flowmeter (Clamp-on) 1. Lanry Doppler Clamp on Ultrasonic Flow Meter for Liquid Mud is designed to measure volumetric flow of liquid within closed conduit, the pipe line must be full of liquids, and there must be a...

Mardi 24 août 2021

Prix : 1000-4000usd/unit

Product Description Product Introduction Of Doppler Flow Meter (Handheld Type) DF6100-EH Handheld Doppler Ultrasonic Flow Meter Series DF6100-EH Doppler Handheld Ultrasonic Flow Meter is designed to measure volumetric flow of within closed conduit, the pipe line must be full of liquids...

Mardi 24 août 2021

Prix : 200-5000usd/unit

Product Description DOF6000-P Portable Open Channel Ultrasonic Flow Meter The DOF6000 series flowmeter consists of Flow calculator and the Ultraflow QSD 6537 Sensor. The Ultraflow QSD 6537 Sensor is used to measure water velocity, depth, and conductivity of water flowing in rivers...

Samedi 21 août 2021

Rotational mold is to first add plastic raw materials into the mold, and then the mold is continuously rotated along two vertical axes and heated. Under the action of gravity and thermal energy, the plastic raw materials in the mold are gradually uniformly coated and melted and adhered...

Samedi 21 août 2021

Injection mold is a tool for producing plastic products; it is also a tool for giving plastic products a complete structure and precise dimensions. Specifically, it refers to injecting the material melted by heat into the mold cavity by high pressure, and after cooling and solidifying...

Vendredi 20 août 2021

Quantité : 200 units, - Prix : $60~$20,000

As a motor soft starter manufacturers, MICNO offers a wide range of low voltage, medium voltage, high voltage and wide voltage grade universal, digital intelligent and high start soft start. Our ac motor reversing soft starter adopts world-class technology, flexible application and...

Vendredi 20 août 2021

The series of our crash barrier roll forming machine possess the following characteristics: - Cassette-type machine base for multi-profile purposes: 2-wave barriers, 3-wave barriers, and standing posts for choice. - Both underground pit and overground accumulating devices are available...

Vendredi 20 août 2021

The C purlin roll forming machine produced by Hangzhou Roll Forming Technology is manufactured with advanced technologies. Not only does this series have a beautiful design, but it is also greatly economical and practical. This C purlin forming machine series uses the industrial-grade...

Jeudi 19 août 2021

Q35 Series Turntable Shot Blasting Machine is suitable for surface treatment of small-batch castings, forgings and heat treatment parts. It also can strengthen the surface of work-pieces according to the requirements of customers. Especially suitable for the surface cleaning of the...

Jeudi 19 août 2021

This crawler shot blasting machine is one of the standard series of cleaning equipment. It can be used to clean casting, forging and welding parts, and remove the sand and oxide scale on the surface of the workpiece. Due to the good protective measures of the machine, the good performance...

Jeudi 19 août 2021

QGT Series Tilting Drum Type Shot Blasting Machine from professional shot blasting companies is one of the updated products based on GN series steel track shot blasting machine, with the features of high efficiency and uniformity. Due to the use of the roller mechanism, the drum not...

Jeudi 19 août 2021

Hot forging is also called hot die forging by hot forging manufacturers. During the hot die forging process, the deformed metal flows violently and the forging contacts with the die for a long time. Therefore, the mold materials should have high thermal stability, high temperature...

Jeudi 19 août 2021

As some cosmetic, perfumes and pharmaceutical manufacturers become bigger and bigger, the demand for metal perfume cap is increasing greatly, and the demands for aluminum caps is also getting larger and larger. Products Description In the next few years, the consumption of aluminum...

Mercredi 18 août 2021

Brass Swivel Fittings Brass is one of the strongest metals used for various purposes-mainly for the design and development of different pipe joints and solutions. Manufacturers of brass parts in different regions of the world have participated in different sizes, designs and repairers...

Mercredi 18 août 2021

Using Brass Press Fittings for drinking water pipelines or flow is beneficial in a number of ways-mainly because lead cannot be allowed to reach into drinking water. Brass is an older and much preferred option commonly used for such fitting. Sanfitec Brass Industry Co., Ltd. is...

Samedi 14 août 2021

Prix : 1000-6000USD

Weidouli Control Ball Valves contain an On-off control ball valve(O type ball design) and a Control Segment ball valve(V type ball design). The on-off control ball valve is evolved from plug valve, the opening and closing parts is a ball, using the ball goes around the axis of the...

Vendredi 13 août 2021

TAHATH's professional mini handheld wireless massage gun uses percussion therapy to relieve muscle soreness and accelerate recovery, which can efficiently help you to relax the stiff muscles, break down knots, boost blood flow, or prevent DOMS, so as to further increase your flexibility...

Vendredi 13 août 2021

Multiple Modes & Pressure Setting: Include kneading, rolling, scraping, air compression, heating mode, and pressure setting with airbags, this reflexology massager can help stimulate the nerves and make the blood flow better. Remote Control & Timer Function: Remote control...

Vendredi 13 août 2021

Massage Gun, TAHATH professional massager & percussion therapy gun, percussion muscle massager with 5 Speed Levels 4 Massage Heads for Gym Office Home Post-Workout Recovery. The ergonomic single-hand grip with rubber non-slip coating can not only minimize the external vibrations...

Jeudi 12 août 2021

By adjusting the raw material characteristics, the Nylon 6 thermal yarn has a lower melting point. When heated to a certain temperature it will soften and melt into a viscous fluid, then re-curing into a solid after cooling, hence the Nylon 6 thermal yarn has a good bonding effect...

Mardi 10 août 2021

Prix : 1000-6000USD

AMB Series Unmanned Chassis AMB (Auto Mobile Base) series unmanned chassis, a universal chassis designed for the mobile robots, provides some features such as map editing and localization navigation. It provides abundant extent interfaces such as I/O and CAN to mount various upper...

Mardi 10 août 2021

Cross flow type cooling tower is an induced draft cooling tower that can cool water. The water flows vertically from the top of the tower, and the air flows horizontally through the filler. The air flow is orthogonal to the water flow in the cooling tower. The cooling tower is often...

Mardi 10 août 2021

Counter flow cooling tower is a cooling tower in which hot water flows through the filler from top to bottom, air flows through the filler from bottom to top, and hot water and air flow nearly 180 degrees. Including round counter flow cooling tower, square counter flow cooling tower...

Mardi 10 août 2021

The cooling tower sprinkler head is a special water distributor for small and medium-sized round counter flow cooling tower. Through the small holes on the water distribution pipe, the water is evenly spread on the filler, increasing the water vapor contact interface, so that part...

Mardi 10 août 2021

Cooling tower nozzle is the component of water distribution in the cooling tower, which is made of ABS by one-time injection molding. Socket connection, firm connection, easy disassembly, not easy to block, nozzle water distribution is uniform, using cross water distribution method...

Mardi 10 août 2021

The water pump is designed to pump the circulating working water from the heating parts of air conditioners and industrial machines, and sends it to the cooling tower for water air heat exchange, so as to achieve the purpose of heat dissipation and cooling. Zhejiang Aoshuai Refrigeration Co...