THICKNESS - 10346 Annonces

Vendredi 21 octobre 2022

Prix : 10-30USD

Number of layers: 2 Surface finish: ENIG Base material: Taconic TLY-5A Min. hole diameter: 0.3mm Outer Layer W: 1.046mil Outer layer S: /mil Thickness: 0.94mm Advantages Of 2 Layer Taconic PCB Own lamination process to convenient production for Multilayer PCB and shorten the lead time...

Vendredi 21 octobre 2022

Prix : 10-30USD

Number of layers: 2 size: 184.2*158.9mm Surface finish: LF-HASL Base material: Rogers 4350B Min. hole diameter: 0.4mm Minimum Line Width: 0.227mm Minimum Line Space: 0.127mm Thickness: 0.7mm Advantages Of 2 Layer Rogers LF-HASL PCB Own lamination process to convenient production for...

Vendredi 21 octobre 2022

Quantité : 1000tons - Prix : 0.01-100 USD/PCS

This powerful neodymium block magnet measures 1" in length, 1/2" in width, and 1/4" in thickness, with the pull force of 20.37 lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection...

Vendredi 21 octobre 2022

Prix : 10-30USD

Number of layers: 2 size: 96.45*87.73mm Surface finish: ENIG Base material: Rogers 4350B Min. hole diameter: 0.5mm Minimum Line Width：/mm Minimum Line Space：0.139mm Thickness: 0.35mm Advantages Of 2 Layer Rogers ENIG Rf PCB Own lamination process to convenient production for Multilayer...

Vendredi 21 octobre 2022

Prix : 10-30USD

Number of layers: 2 size: 98.45*49.45mm Surface finish: ENIG Base material: Rogers 4350B Min. hole diameter: 0.5mm Minimum Line Width：/mm Minimum Line Space：0.139mm Thickness: 0.35mm Advantages Of 2 Layer Rogers PCB Own lamination process to convenient production for Multilayer PCB...

Vendredi 21 octobre 2022

Quantité : 1000tons - Prix : 0.01-100 USD/PCS

This powerful neodymium block magnets measures 2/3" in length, 1/2"in width, and 1/4" in thickness, with the pull force of 15.95 lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection...

Vendredi 21 octobre 2022

Prix : 10-30USD

Number of layers: 2 Surface finish: ENIG Base material: F4B Min. hole diameter: 0.8mm Outer Layer W: 6mil Outer layer S: 6mil Thickness: 1.0mm Advantages Of 2 Layer F4B PCB Own lamination process to convenient production for Multilayer PCB and shorten the lead time. Jiangxi facility...

Vendredi 21 octobre 2022

Quantité : 1000tons - Prix : 0.01-100 USD/PCS

This powerful neodymium block magnet measures 3/4" in length, 1/4" in width, and 1/4" in thickness, with the pull force of 10.51 lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection...

Vendredi 21 octobre 2022

Quantité : 1000tons - Prix : 0.01-100 USD/PCS

This powerful neodymium disc magnet measures 3/8" in diameter, 1/2" in thickness, with the pull force of 8.5lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection. The applications...

Vendredi 21 octobre 2022

Quantité : 1000tons - Prix : 0.01-100 USD/PCS

This powerful neodymium disc magnet measures 3/8" in diameter, 1/2" in thickness, with the pull force of 10.52 lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection. The applications...

Vendredi 21 octobre 2022

Quantité : 1000tons - Prix : 0.01-100 USD/PCS

This powerful neodymium disc magnet measures 1/2" in diameter, 1/16" in thickness, with the pull force of 3.84lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel for effective corrosion protection. The applications...

Vendredi 21 octobre 2022

Quantité : 1000tons - Prix : 0.01-100 USD/PCS

Round Magnet N42 1/2 inch x1/16 inch Industrial Magnets For Sale This powerful neodymium disc magnet measures 1/2" in diameter, 1/16" in thickness, with the pull force of 3.1lb vertically. It is made from an alloy of neodymium, iron and boron, plated with triple layers of nickel-copper-nickel...

Jeudi 20 octobre 2022

The sectional louver made from light-weight corrosion-free PVC sections offers easy access to cold water basin.Each louver section is easily removed and the unique design limits the direct sunlight entering the cold water basin plus keeping airborne debris away from the tower,reducing...

Jeudi 20 octobre 2022

GEA filling is made of corrugated PVC sheet, which can obtain maximum strength by solvent welding, and is resistant to ultraviolet, rot, fungi, organic and inorganic solvents, acids, alkalis and common chemicals in cooling tower water. Parameter Of Cooling Tower Filling For GEA Module...

Jeudi 20 octobre 2022

BAC cooling tower filling is one of the most important parts of the heat exchange process of the cooling tower. It is also the main part to improve the efficiency of cooling tower and ensure the economy and safe operation. The surface of specially designed packing is an S-shaped ladder-shaped...

Jeudi 20 octobre 2022

Quantité : USD3000-20 - Prix : 30-40sets/per month

Pre Deformation Mold When the plastic material rushes into the mold cavity, it loses heat due to heat conduction, and the melted plastic will freeze and solidify, therefore, for complex or large products, high mold temperature is usually used for filling, the purpose is to reduce...

Jeudi 20 octobre 2022

M10 solar cell, compared with the existing product span, equipment, process, auxiliary material maturity, production line upgrading difficulty, current product yield, and other factors, the M10 cell busbar P-type bifacial half-cut is the best size to achieve ultra-high power modules...

Jeudi 20 octobre 2022

G1 solar cell size plays an important role in the first unified standard size of monocrystalline perc in the module. G1 perc bifacial solar cell size is 158.75mm, which has the advantages of lower production costs, higher power, and higher acceptance of the cell side on the premise...

Jeudi 20 octobre 2022

G12 large size silicon chip can improve the production efficiency from silicon chip to battery chip to module. At the same time, the production and operation costs can be reduced, especially for medium and large-scale distributed systems and ground power stations, which can effectively...

Jeudi 20 octobre 2022

Quantité : 100000 - Prix : 2-20

Stainless steel blade: solid 1.2mm 304 food-grade stainless-steel blade for rugged, reliable strength. Serrated edge: effortlessly cuts through cakes and delicate foods without crushing. Stainless steel handle: allows for a secure grip and comfortable control. Suitable for at-home kitchens...

Jeudi 20 octobre 2022

Quantité : 100000 - Prix : 2-20

Robust and durable stainless steel is safe for food, neutral in odor and taste. The adjustable clip allows adjusting the desired size effortlessly. Imprinted figure scale for easier adjustment. Easy-care and dishwasher-safe. - Specification of 18/8 BPA-free Stainless Steel Cake Ring...

Jeudi 20 octobre 2022

Quantité : 5000-10000 - Prix : 1000-5000,5000-10000

Beautiful kitchen cabinets can not only create a warm atmosphere in the kitchen, but also show the taste and grade of the host, bringing a sense of beauty and delicacy to people. With the needs of people's quality of life, there are more and more colors, materials and shapes of the...

Jeudi 20 octobre 2022

Quantité : 5000-10000 - Prix : 1000-5000,5000-10000

L shape matt lacquer finish kitchen with island in the middle design, make full use of the kitchen space. Lift-up open wall cabinets enhance the sense of science and technology，glass door design increasing the Visual effect Specifications of custom kitchens and cabinets Model...

Mercredi 19 octobre 2022

Quantité : 30 - Prix : 10000-100000

The steel profile roll forming machine mainly consists of four parts: The first is the input section - in this section, the material is loaded at a continuous rate. The next part is the roller section - in this part of the machine the material will change in the desired shape. For this purpose...

Mardi 18 octobre 2022

American light duty suspension, suspension hanger thickness 4mm, it is used with high strength steel Q345, it is durable and long time life. it used with 3pcs, 8pcs, 9pcs leaf spring. Features of Overslung Suspension Lightweight design, easy to install and easy to maintain. MSide...

Mardi 18 octobre 2022

Overland Trailer Suspension This suspension also called light duty suspension, suspension hanger thickness 4mm, it is used with high strength steel Q345, it is durable and long time life. Features of overland trailer suspension off road Lightweight design, easy to install and easy to maintain...

Mardi 18 octobre 2022

The overland trailer axle kit is the perfect choice for anyone towing a car, motorcycle, or ATV. The axle is designed for light-duty use and is made from heat-treated aluminum. Features Of Overland Trailer Axle Our Overland Trailers feature a fully retractable axle, allowing fantastic...

Mardi 18 octobre 2022

The material of silicone cpu pad is soft, good compression performance, good thermal insulation performance, adjustable thickness range is relatively large, suitable for filling the cavity, both sides have natural viscosity, operability and maintainability; The main purpose of the...

Mardi 18 octobre 2022

Effectively improve the heat transfer efficiency; Play the role of insulation, shock absorption, sealing, and so on; Meet the design requirements of miniaturization and ultra-thin equipment. Silicone thermal pad is based on silicone, adding auxiliary materials such as metal oxides...

Mardi 18 octobre 2022

Hastelloy C-276/N10276 Nickel Alloy Tube has a relatively higher molybdenum content than C22. And the Hastelloy C276 seamless pipe is made with seamless craftsmanship. HASTELLOY C276 PIPE SPECIFICATION Steel Grade N06022,N10276 Type Seamless Standard ASTM, AISI, GB, DIN, JIS...