OILFIELD - 371 Annonces

Vendredi 30 mars 2018

Prix : USD 305000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Vendredi 30 mars 2018

Prix : USD 305000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Vendredi 30 mars 2018

Prix : USD 305000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Vendredi 30 mars 2018

Prix : USD 305000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Vendredi 30 mars 2018

Prix : USD 305000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Vendredi 30 mars 2018

Prix : USD 305000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Vendredi 30 mars 2018

Prix : USD 305000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Vendredi 30 mars 2018

Prix : USD 305000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Vendredi 30 mars 2018

Prix : USD 305000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Vendredi 30 mars 2018

Prix : USD 305000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Vendredi 30 mars 2018

Prix : USD 300000 per piece

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Vendredi 30 mars 2018

Prix : USD310000/EA

DRILL PIPE PRODUCTION LINE: The production line for the processing and production of oil drilling pipe, is mainly divided into three steps, by using the upsetting machine, Intermediate frequency quenching and tempering machines, pipe threading lathes and some other machines. Highlights: 1...

Mardi 06 mars 2018

- Line pipe is to take out the ground of oil, gas or water, through the line pipe to the oil and gas industry enterprises. Line pipe includes two kinds of seamless and welded pipe, the pipe end has a flat end, with threaded end and socket end; its connection for the end of welding...

Mardi 06 mars 2018

High pressure fluid control fitting are forged from high strength alloy steel for high-pressure discharge lines, water lines, temporary flow lines, well testing lines, cementing and circulating lines, and other high-pressure applications, in size 1", 2" and 3”, and available in pressure...

Mardi 06 mars 2018

- Decanter CentrifugeLW series decanting centrifuge is the fourth class solids control equipment in well drilling solids control. Using decanter principle to separate suspension liquid. According to rotary speed can be called middle speed decanting centrifuge, highspeed decanting centrifuge...

Mardi 06 mars 2018

DMS Casing anchor can anchor the casing bottom and formation together in well bore. It can give the prestressing force to casings in well cementing operation after installing this device. This prestressing force can be kept after the solidification of cement, so that it can avoid...

Mardi 06 mars 2018

Oil casing is used to support the oil, gas shaft wall of the pipe to ensure that the drilling process and after the completion of the normal operation of the entire well. Each well according to the different drilling depth and geological conditions, to use several layers of casing...

Vendredi 19 janvier 2018

Quantité : NEGOTIATIO - Prix : NEGOTIATION

DBNPA (2.2-Dibromo -3 - Cyanide (Nitrile) C-based amide): CAS NO.: 10222-01-2 Usage: biocides in broad spectrum. It is widely used in industrial circulating water system, large air-condition and the large center of sewage treatment to eliminate microorganism and alga and shuck off clay...

Samedi 16 décembre 2017

Quantité : 1000 - Prix : 30-100

Introduction of RS232 / RS485 GSM Modem USR-GPRS232-730 GSM Modem / GPRS DTU (Data Transfer Unit) is a wireless terminal equipment which can convert serial data to IP data or convert IP data to serial data through gprs /GSM network. 730 is based on USR-GM3. Clients can use this product...

Samedi 16 décembre 2017

Quantité : 1000 - Prix : 30-100

Introduction USR-GPRS232-734 is a new GPRS device developed by USR IOT in 2016. Maturation software functions, covering mostly conventional application scenarios. Users can realize Serial to Network bidirectional transparent data transmission via simple configuration. Supporting custom...

Vendredi 24 novembre 2017

- Check Valve - 1. Size: 2"~36" 2. Connection: ASME B16.10 3. Certifications: API600, BS1868 4. Standard: DIN GB ISO JIS ANSI 5. Material: WCB,CF8M,CF8,CF3,CF3M 6. Working Pressure: Class150LB~Class2500LB 7. Flanged End: ≤24" to ASME B16.5, ≥26" to ASME B16.47 Series A 8. Short...

Vendredi 24 novembre 2017

- Globe Valve - 1. Material: WCB、 WC6 、WC9、A105、 F11、 CF8、 CF8M 2. Working pressure：CLASS150-CLASS900 3. Nominal diameter：DN50-DN300 4. Temperature ：-196℃-650℃ 5. Connection type：flange , weld, thread 6. Suitable medium: water, oil, gas The structure of globe valve is simpler than...

Vendredi 24 novembre 2017

- Butterfly Valve - 1. Material: WCB、 WC6 、WC9、A105、 F11、 CF8、 CF8M 2. Working pressure: CLASS150-CLASS300 3. Nominal diameter: DN50-DN1200 4. Temperature: -196℃-650℃ 5. Connection type：flange , center-line wafer butterfly valve 6. Simple and compact structure, compact and lightweight...

Vendredi 24 novembre 2017

- Ball Valve - - Material: WCB、 WC6 、WC9、A105、 F11、 CF8、 CF8M - Working pressure：CLASS150-CLASS1500 - Nominal diameter：DN50-DN300 - Temperature ：-196℃-650℃ - Connection type：flange, weld, thread - Suitable medium: water, oil, gas Ball valve is mainly used to disconnect or connect...

Vendredi 24 novembre 2017

Valve Series Valve series products include gate valve, ball valve, butterfly valve, globe valve, check valve, plug valve, safety valve and reducing valve. We have high precision NCN machine center, advanced machine equipment and inspection equipment, excellent technology, strict quality...

Vendredi 24 novembre 2017

- Flexible Elbow - - Working pressure: 2000-20000PSI - Normial diameter: 1″-3″ Flexible elbow is a kind of a metal pipe adapter with integral ball bearing. It adopts gold-plated high strength steel with heat treatment to ensure the strength under rated working pressure with long service life...

Vendredi 24 novembre 2017

- Pipe Fitting - - Tube Fittings - - Sizes range from 1/16”to 1 1/2” and 2 mm to 38mm. - Precision machined components ensure perfect deformation of the ferrules and tubing. - Fittings are easy to disconnect and retighten. - Hardened threads with smooth surface finish avoid galling...

Vendredi 24 novembre 2017

- Ductile Cast Iron - 1. Certification: ISO9001 2. Range: DN80-2600mm 3. Class: C25/C30/C40//K8/K9 4. Pressure: PN10/PN16/PN25/PN40 5. Joint type: T type/K type/Self-restrained type 6. Material: ductile iron 7. Thread: coarse, fine 8. Suitable medium: Water, gas , liquid material transfer...

Vendredi 24 novembre 2017

- Stainless Steel Pipe - Item Description Product name Stainless steel pipe/tube Material 201 202 304 304L 316 316L 321 309 310 310S 430 410 Thickness 0.5mm-100mm Outer diameter 10mm-1000mm Length 6meters or as per customized Technical treatment Cold rolled and Hot...

Vendredi 24 novembre 2017

- Casing - External Diameter Internal Diameter Thickness Steel Grade in mm in mm mm 4 - 1/2 114.30 4.000 101.60 6.35 J55, K55, L80,P110 5 127 3.920 99.57 7.37 J55, K55, L80,P111 4.408 111.96 7.52 J55, K55, L80,P112 4.276 108.61 9.29 J55, K55, L80,P113 4...